From mboxrd@z Thu Jan 1 00:00:00 1970 From: mzoran@crowfest.net (Michael Zoran) Date: Sun, 22 Jan 2017 03:22:53 -0800 Subject: ARM64: Disabling warnings about deprecated armv8 instructions In-Reply-To: <1485083115.1308.10.camel@crowfest.net> References: <1485072424.14066.2.camel@crowfest.net> <9647813.NZ2c5cYUSH@localhost> <1485075528.14345.1.camel@crowfest.net> <20170122170523.3b4b1235@xhacker> <1485077887.1308.2.camel@crowfest.net> <1485078760.1308.6.camel@crowfest.net> <1485083115.1308.10.camel@crowfest.net> Message-ID: <1485084173.1308.12.camel@crowfest.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, 2017-01-22 at 03:05 -0800, Michael Zoran wrote: > On Sun, 2017-01-22 at 10:54 +0000, Ard Biesheuvel wrote: > > Did you try linux32? > > > > pi at raspberrypi:~$ uname -a > > Linux raspberrypi 4.10.0-rc3-v8+ #3 SMP PREEMPT Sun Jan 15 15:22:12 > > WET 2017 aarch64 GNU/Linux > > pi at raspberrypi:~ $ linux32 uname -a > > Linux raspberrypi 4.10.0-rc3-v8+ #3 SMP PREEMPT Sun Jan 15 15:22:12 > > WET 2017 armv8l GNU/Linux > > > > If the app in question cannot deal with the armv8l personality, the > > app should be fixed instead. > > Thanks, I didn't know about the tool. > > I'm looking at the code in arch/arm64/include/asm/elf.h. I'm looking > at > the COMPAT_SET_PERSONALITY macro.??It appears to be broken.??It > seems? > like it should have a call to set_personality with PER_LINUX32.?? > > If I look in include/uapi/linux/personality.h, I see some very > interesting things. Quite the complex set of options I would say. > > /* > ?* Flags for bug emulation. > ?* > ?* These occupy the top three bytes. > ?*/ > enum { > UNAME26 =???????????????0x0020000, > ADDR_NO_RANDOMIZE =? 0x0040000, /* disable > randomization of VA space */ > FDPIC_FUNCPTRS = 0x0080000, /* userspace function > ptrs point to descriptors > ?* (signal handling) > ?*/ > MMAP_PAGE_ZERO = 0x0100000, > ADDR_COMPAT_LAYOUT = 0x0200000, > READ_IMPLIES_EXEC = 0x0400000, > ADDR_LIMIT_32BIT = 0x0800000, > SHORT_INODE = 0x1000000, > WHOLE_SECONDS = 0x2000000, > STICKY_TIMEOUTS = 0x4000000, > ADDR_LIMIT_3GB =? 0x8000000, > }; > > /* > ?* Security-relevant compatibility flags that must be > ?* cleared upon setuid or setgid exec: > ?*/ > #define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC??| \ > ????ADDR_NO_RANDOMIZE??| \ > ????ADDR_COMPAT_LAYOUT | \ > ????MMAP_PAGE_ZERO) > > /* > ?* Personality types. > ?* > ?* These go in the low byte.??Avoid using the top bit, it will > ?* conflict with error returns. > ?*/ > enum { > PER_LINUX = 0x0000, > PER_LINUX_32BIT = 0x0000 | ADDR_LIMIT_32BIT, > PER_LINUX_FDPIC = 0x0000 | FDPIC_FUNCPTRS, > PER_SVR4 = 0x0001 | STICKY_TIMEOUTS | > MMAP_PAGE_ZERO, > PER_SVR3 = 0x0002 | STICKY_TIMEOUTS | > SHORT_INODE, > PER_SCOSVR3 = 0x0003 | STICKY_TIMEOUTS | > ?WHOLE_SECONDS | SHORT_INODE, > PER_OSR5 = 0x0003 | STICKY_TIMEOUTS | > WHOLE_SECONDS, > PER_WYSEV386 = 0x0004 | STICKY_TIMEOUTS | > SHORT_INODE, > PER_ISCR4 = 0x0005 | STICKY_TIMEOUTS, > PER_BSD = 0x0006, > PER_SUNOS = 0x0006 | STICKY_TIMEOUTS, > PER_XENIX = 0x0007 | STICKY_TIMEOUTS | > SHORT_INODE, > PER_LINUX32 = 0x0008, > PER_LINUX32_3GB = 0x0008 | ADDR_LIMIT_3GB, > PER_IRIX32 = 0x0009 | STICKY_TIMEOUTS,/* IRIX5 > 32-bit */ > PER_IRIXN32 = 0x000a | STICKY_TIMEOUTS,/* IRIX6 > new 32-bit */ > PER_IRIX64 = 0x000b | STICKY_TIMEOUTS,/* IRIX6 > 64-bit */ > PER_RISCOS = 0x000c, > PER_SOLARIS = 0x000d | STICKY_TIMEOUTS, > PER_UW7 = 0x000e | STICKY_TIMEOUTS | > MMAP_PAGE_ZERO, > PER_OSF4 = 0x000f, ?/* > OSF/1 v4 */ > PER_HPUX = 0x0010, > PER_MASK = 0x00ff, > }; > OK, I got mathematica to load without using the linux32 tool. I changed the macro to this. #define COMPAT_SET_PERSONALITY(ex) \ ({ \ set_bit(TIF_32BIT, ¤t->mm->context.flags); \ set_thread_flag(TIF_32BIT); \ set_personality(current->personality??= PER_LINUX32);???????????\ }) But I'm not sure that is really the correct set of options. Why not PER_LINUX32_3GB or PER_LINUX_32BIT?