From: jintack@cs.columbia.edu (Jintack Lim)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC v2 05/10] KVM: arm/arm64: Initialize the emulated EL1 physical timer
Date: Thu, 26 Jan 2017 20:04:55 -0500 [thread overview]
Message-ID: <1485479100-4966-6-git-send-email-jintack@cs.columbia.edu> (raw)
In-Reply-To: <1485479100-4966-1-git-send-email-jintack@cs.columbia.edu>
Initialize the emulated EL1 physical timer with the default irq number.
Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
---
arch/arm/kvm/reset.c | 9 ++++++++-
arch/arm64/kvm/reset.c | 9 ++++++++-
include/kvm/arm_arch_timer.h | 3 ++-
virt/kvm/arm/arch_timer.c | 9 +++++++--
4 files changed, 25 insertions(+), 5 deletions(-)
diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c
index 4b5e802..1da8b2d 100644
--- a/arch/arm/kvm/reset.c
+++ b/arch/arm/kvm/reset.c
@@ -37,6 +37,11 @@
.usr_regs.ARM_cpsr = SVC_MODE | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT,
};
+static const struct kvm_irq_level cortexa_ptimer_irq = {
+ { .irq = 30 },
+ .level = 1,
+};
+
static const struct kvm_irq_level cortexa_vtimer_irq = {
{ .irq = 27 },
.level = 1,
@@ -58,6 +63,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
{
struct kvm_regs *reset_regs;
const struct kvm_irq_level *cpu_vtimer_irq;
+ const struct kvm_irq_level *cpu_ptimer_irq;
switch (vcpu->arch.target) {
case KVM_ARM_TARGET_CORTEX_A7:
@@ -65,6 +71,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
reset_regs = &cortexa_regs_reset;
vcpu->arch.midr = read_cpuid_id();
cpu_vtimer_irq = &cortexa_vtimer_irq;
+ cpu_ptimer_irq = &cortexa_ptimer_irq;
break;
default:
return -ENODEV;
@@ -77,5 +84,5 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
kvm_reset_coprocs(vcpu);
/* Reset arch_timer context */
- return kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq);
+ return kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq, cpu_ptimer_irq);
}
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index e95d4f6..d9e9697 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -46,6 +46,11 @@
COMPAT_PSR_I_BIT | COMPAT_PSR_F_BIT),
};
+static const struct kvm_irq_level default_ptimer_irq = {
+ .irq = 30,
+ .level = 1,
+};
+
static const struct kvm_irq_level default_vtimer_irq = {
.irq = 27,
.level = 1,
@@ -104,6 +109,7 @@ int kvm_arch_dev_ioctl_check_extension(struct kvm *kvm, long ext)
int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
{
const struct kvm_irq_level *cpu_vtimer_irq;
+ const struct kvm_irq_level *cpu_ptimer_irq;
const struct kvm_regs *cpu_reset;
switch (vcpu->arch.target) {
@@ -117,6 +123,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
}
cpu_vtimer_irq = &default_vtimer_irq;
+ cpu_ptimer_irq = &default_ptimer_irq;
break;
}
@@ -130,5 +137,5 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
kvm_pmu_vcpu_reset(vcpu);
/* Reset timer */
- return kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq);
+ return kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq, cpu_ptimer_irq);
}
diff --git a/include/kvm/arm_arch_timer.h b/include/kvm/arm_arch_timer.h
index 69f648b..a364593 100644
--- a/include/kvm/arm_arch_timer.h
+++ b/include/kvm/arm_arch_timer.h
@@ -59,7 +59,8 @@ struct arch_timer_cpu {
int kvm_timer_enable(struct kvm_vcpu *vcpu);
void kvm_timer_init(struct kvm *kvm);
int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
- const struct kvm_irq_level *irq);
+ const struct kvm_irq_level *virt_irq,
+ const struct kvm_irq_level *phys_irq);
void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu);
void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu);
void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu);
diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
index f72005a..0f6e935 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -329,9 +329,11 @@ void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu)
}
int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
- const struct kvm_irq_level *irq)
+ const struct kvm_irq_level *virt_irq,
+ const struct kvm_irq_level *phys_irq)
{
struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
+ struct arch_timer_context *ptimer = vcpu_ptimer(vcpu);
/*
* The vcpu timer irq number cannot be determined in
@@ -339,7 +341,8 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
* kvm_vcpu_set_target(). To handle this, we determine
* vcpu timer irq number when the vcpu is reset.
*/
- vtimer->irq.irq = irq->irq;
+ vtimer->irq.irq = virt_irq->irq;
+ ptimer->irq.irq = phys_irq->irq;
/*
* The bits in CNTV_CTL are architecturally reset to UNKNOWN for ARMv8
@@ -348,6 +351,7 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu,
* the ARMv7 architecture.
*/
vtimer->cnt_ctl = 0;
+ ptimer->cnt_ctl = 0;
kvm_timer_update_state(vcpu);
return 0;
@@ -369,6 +373,7 @@ void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu)
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
update_vtimer_cntvoff(vcpu, kvm_phys_timer_read());
+ vcpu_ptimer(vcpu)->cntvoff = 0;
INIT_WORK(&timer->expired, kvm_timer_inject_irq_work);
hrtimer_init(&timer->timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
--
1.9.1
next prev parent reply other threads:[~2017-01-27 1:04 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-27 1:04 [RFC v2 00/10] Provide the EL1 physical timer to the VM Jintack Lim
2017-01-27 1:04 ` [RFC v2 01/10] KVM: arm/arm64: Abstract virtual timer context into separate structure Jintack Lim
2017-01-29 11:44 ` Marc Zyngier
2017-01-27 1:04 ` [RFC v2 02/10] KVM: arm/arm64: Move cntvoff to each timer context Jintack Lim
2017-01-29 11:54 ` Marc Zyngier
2017-01-30 14:45 ` Christoffer Dall
2017-01-30 14:51 ` Marc Zyngier
2017-01-30 17:40 ` Jintack Lim
2017-01-30 17:58 ` Jintack Lim
2017-01-30 18:05 ` Marc Zyngier
2017-01-30 18:45 ` Jintack Lim
2017-01-27 1:04 ` [RFC v2 03/10] KVM: arm/arm64: Decouple kvm timer functions from virtual timer Jintack Lim
2017-01-29 12:01 ` Marc Zyngier
2017-01-30 17:17 ` Jintack Lim
2017-01-30 14:49 ` Christoffer Dall
2017-01-30 17:18 ` Jintack Lim
2017-01-27 1:04 ` [RFC v2 04/10] KVM: arm/arm64: Add the EL1 physical timer context Jintack Lim
2017-01-27 1:04 ` Jintack Lim [this message]
2017-01-29 12:07 ` [RFC v2 05/10] KVM: arm/arm64: Initialize the emulated EL1 physical timer Marc Zyngier
2017-01-30 14:58 ` Christoffer Dall
2017-01-30 17:44 ` Marc Zyngier
2017-01-30 19:04 ` Christoffer Dall
2017-02-01 10:08 ` Marc Zyngier
2017-01-27 1:04 ` [RFC v2 06/10] KVM: arm/arm64: Update the physical timer interrupt level Jintack Lim
2017-01-29 15:21 ` Marc Zyngier
2017-01-30 15:02 ` Christoffer Dall
2017-01-30 17:50 ` Marc Zyngier
2017-01-30 18:41 ` Christoffer Dall
2017-01-30 18:48 ` Marc Zyngier
2017-01-30 19:06 ` Christoffer Dall
2017-01-31 17:00 ` Marc Zyngier
2017-02-01 8:02 ` Christoffer Dall
2017-02-01 8:04 ` Christoffer Dall
2017-02-01 8:40 ` Jintack Lim
2017-02-01 10:07 ` Christoffer Dall
2017-02-01 10:17 ` Marc Zyngier
2017-02-01 10:01 ` Marc Zyngier
2017-01-27 1:04 ` [RFC v2 07/10] KVM: arm/arm64: Set a background timer to the earliest timer expiration Jintack Lim
2017-01-27 1:04 ` [RFC v2 08/10] KVM: arm/arm64: Set up a background timer for the physical timer emulation Jintack Lim
2017-01-27 1:04 ` [RFC v2 09/10] KVM: arm64: Add the EL1 physical timer access handler Jintack Lim
2017-01-27 1:05 ` [RFC v2 10/10] KVM: arm/arm64: Emulate the EL1 phys timer register access Jintack Lim
2017-01-29 15:44 ` Marc Zyngier
2017-01-30 17:08 ` Jintack Lim
2017-01-30 17:26 ` Peter Maydell
2017-01-30 17:35 ` Marc Zyngier
2017-01-30 17:38 ` Jintack Lim
2017-01-29 15:55 ` [RFC v2 00/10] Provide the EL1 physical timer to the VM Marc Zyngier
2017-01-30 19:02 ` Jintack Lim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485479100-4966-6-git-send-email-jintack@cs.columbia.edu \
--to=jintack@cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).