From: agustinv@codeaurora.org (Agustin Vega-Frias)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V12 0/3] irqchip: qcom: Add IRQ combiner driver
Date: Thu, 2 Feb 2017 18:23:56 -0500 [thread overview]
Message-ID: <1486077839-25547-1-git-send-email-agustinv@codeaurora.org> (raw)
Add support for IRQ combiners in the Top-level Control and Status
Registers (TCSR) hardware block in Qualcomm Technologies chips.
The first patch prevents the ACPI core from attempting to map IRQ resources
with a valid ResourceSource as GSIs.
The second patch adds support for ResourceSource/IRQ domain mapping and
fixes IRQ probe deferral by allowing platform_device IRQ resources to be
re-initialized from the corresponding ACPI IRQ resource.
Both changes described above are conditional on the ACPI_GENERIC_GSI config.
The third patch takes advantage of the new capabilities to implement
the driver for the IRQ combiners.
Tested on top of v4.10-rc6.
Changes V11 -> V12:
* Remove probe table, add that optimization later.
* Fix some minor style issues.
Changes V10 -> V11:
* Add probe table and use it to implement driver presence detection.
* Fix kernel doc formatting in drivers/acpi/irq.c and some minor style issues.
* Minor bug fixes in the driver.
Changes V9 -> V10:
* Add checks for the producer_consumer field to not use produced IRQ
resources as consumed.
* Minor bug fixes in the driver.
Changes V8 -> V9:
* Do not attempt the mapping for non-GSI IRQs during bus scan.
* Make some public APIs private to drivers/acpi/irq.c since they are no
longer used on other modules.
Agustin Vega-Frias (3):
ACPI: Generic GSI: Do not attempt to map non-GSI IRQs during bus scan
ACPI: Add support for ResourceSource/IRQ domain mapping
irqchip: qcom: Add IRQ combiner driver
drivers/acpi/Makefile | 2 +-
drivers/acpi/{gsi.c => irq.c} | 199 ++++++++++++++++++++++++
drivers/acpi/resource.c | 18 ++-
drivers/base/platform.c | 10 ++
drivers/irqchip/Kconfig | 9 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/qcom-irq-combiner.c | 296 ++++++++++++++++++++++++++++++++++++
include/linux/acpi.h | 10 ++
8 files changed, 543 insertions(+), 2 deletions(-)
rename drivers/acpi/{gsi.c => irq.c} (31%)
create mode 100644 drivers/irqchip/qcom-irq-combiner.c
--
Qualcomm Datacenter Technologies, Inc. on behalf of the Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
next reply other threads:[~2017-02-02 23:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-02 23:23 Agustin Vega-Frias [this message]
2017-02-02 23:23 ` [PATCH V12 1/3] ACPI: Generic GSI: Do not attempt to map non-GSI IRQs during bus scan Agustin Vega-Frias
2017-02-03 9:01 ` Lorenzo Pieralisi
2017-02-02 23:23 ` [PATCH V12 2/3] ACPI: Add support for ResourceSource/IRQ domain mapping Agustin Vega-Frias
2017-02-03 9:02 ` Lorenzo Pieralisi
2017-02-02 23:23 ` [PATCH V12 3/3] irqchip: qcom: Add IRQ combiner driver Agustin Vega-Frias
2017-02-03 10:31 ` [PATCH V12 0/3] " Hanjun Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1486077839-25547-1-git-send-email-agustinv@codeaurora.org \
--to=agustinv@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).