From mboxrd@z Thu Jan 1 00:00:00 1970 From: andy.yan@rock-chips.com (Andy Yan) Date: Mon, 13 Feb 2017 19:04:17 +0800 Subject: [PATCH 2/7] dt-bindings: rk1108-cru: rename RK1108 to RV1108 In-Reply-To: <1486983566-32265-1-git-send-email-andy.yan@rock-chips.com> References: <1486983566-32265-1-git-send-email-andy.yan@rock-chips.com> Message-ID: <1486983857-32399-1-git-send-email-andy.yan@rock-chips.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Rockchip finally named the SOC as RV1108, so change it. Signed-off-by: Andy Yan --- .../{rockchip,rk1108-cru.txt => rockchip,rv1108-cru.txt} | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) rename Documentation/devicetree/bindings/clock/{rockchip,rk1108-cru.txt => rockchip,rv1108-cru.txt} (83%) diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt similarity index 83% rename from Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt rename to Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt index 4da1261..161326a 100644 --- a/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt +++ b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt @@ -1,12 +1,12 @@ -* Rockchip RK1108 Clock and Reset Unit +* Rockchip RV1108 Clock and Reset Unit -The RK1108 clock controller generates and supplies clock to various +The RV1108 clock controller generates and supplies clock to various controllers within the SoC and also implements a reset controller for SoC peripherals. Required Properties: -- compatible: should be "rockchip,rk1108-cru" +- compatible: should be "rockchip,rv1108-cru" - reg: physical base address of the controller and length of memory mapped region. - #clock-cells: should be 1. @@ -19,7 +19,7 @@ Optional Properties: Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk1108-cru.h headers and can be +preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be used in device tree sources. Similar macros exist for the reset sources in these files. @@ -38,7 +38,7 @@ clock-output-names: Example: Clock controller node: cru: cru at 20200000 { - compatible = "rockchip,rk1108-cru"; + compatible = "rockchip,rv1108-cru"; reg = <0x20200000 0x1000>; rockchip,grf = <&grf>; @@ -50,7 +50,7 @@ Example: UART controller node that consumes the clock generated by the clock controller: uart0: serial at 10230000 { - compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; reg = <0x10230000 0x100>; interrupts = ; reg-shift = <2>; -- 2.7.4