[PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk

[PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk

[yuantian.tang at nxp.com]

From: Tang Yuantian <Yuantian.Tang@nxp.com>

ls1012a has separate input root clocks for core PLLs versus the platform
PLL, with the latter described as sysclk in the hw docs.
Update the qoriq-clock binding to allow a second input clock, named
"coreclk".  If present, this clock will be used for the core PLLs.

Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
---
 Documentation/devicetree/bindings/clock/qoriq-clock.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
index df9cb5a..97a9666 100644
--- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -55,6 +55,11 @@ Optional properties:
 - clocks: If clock-frequency is not specified, sysclk may be provided
 	as an input clock.  Either clock-frequency or clocks must be
 	provided.
+	A second input clock, called "coreclk", may be provided if
+	core PLLs are based on a different input clock from the
+	platform PLL.
+- clock-names: Required if a coreclk is present.  Valid names are
+	"sysclk" and "coreclk".
 
 2. Clock Provider
 
@@ -71,6 +76,7 @@ second cell is the clock index for the specified type.
 	2	hwaccel		index (n in CLKCGnHWACSR)
 	3	fman		0 for fm1, 1 for fm2
 	4	platform pll	0=pll, 1=pll/2, 2=pll/3, 3=pll/4
+	5	coreclk		must be 0
 
 3. Example
 
-- 
2.1.0.27.g96db324

[PATCH 2/2] clk: qoriq: Separate root input clock for core PLLs on ls1012a

[yuantian.tang at nxp.com]

From: Tang Yuantian <Yuantian.Tang@nxp.com>

ls1012a has separate input root clocks for core PLLs versus the
platform PLL, with the latter described as sysclk in the hw docs.
If a second input clock, named "coreclk", is present, this clock will be
used for the core PLLs.

Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
---
 drivers/clk/clk-qoriq.c | 91 +++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 77 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index d0bf8b1..f3931e3 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -87,7 +87,7 @@ struct clockgen {
 	struct device_node *node;
 	void __iomem *regs;
 	struct clockgen_chipinfo info; /* mutable copy */
-	struct clk *sysclk;
+	struct clk *sysclk, *coreclk;
 	struct clockgen_pll pll[6];
 	struct clk *cmux[NUM_CMUX];
 	struct clk *hwaccel[NUM_HWACCEL];
@@ -904,7 +904,12 @@ static void __init create_muxes(struct clockgen *cg)
 
 static void __init clockgen_init(struct device_node *np);
 
-/* Legacy nodes may get probed before the parent clockgen node */
+/*
+ * Legacy nodes may get probed before the parent clockgen node.
+ * It is assumed that device trees with legacy nodes will not
+ * contain a "clocks" property -- otherwise the input clocks may
+ * not be initialized at this point.
+ */
 static void __init legacy_init_clockgen(struct device_node *np)
 {
 	if (!clockgen.node)
@@ -945,18 +950,13 @@ static struct clk __init
 	return clk_register_fixed_rate(NULL, name, NULL, 0, rate);
 }
 
-static struct clk *sysclk_from_parent(const char *name)
+static struct clk __init *input_clock(const char *name, struct clk *clk)
 {
-	struct clk *clk;
-	const char *parent_name;
-
-	clk = of_clk_get(clockgen.node, 0);
-	if (IS_ERR(clk))
-		return clk;
+	const char *input_name;
 
 	/* Register the input clock under the desired name. */
-	parent_name = __clk_get_name(clk);
-	clk = clk_register_fixed_factor(NULL, name, parent_name,
+	input_name = __clk_get_name(clk);
+	clk = clk_register_fixed_factor(NULL, name, input_name,
 					0, 1, 1);
 	if (IS_ERR(clk))
 		pr_err("%s: Couldn't register %s: %ld\n", __func__, name,
@@ -965,6 +965,29 @@ static struct clk *sysclk_from_parent(const char *name)
 	return clk;
 }
 
+static struct clk __init *input_clock_by_name(const char *name,
+					      const char *dtname)
+{
+	struct clk *clk;
+
+	clk = of_clk_get_by_name(clockgen.node, dtname);
+	if (IS_ERR(clk))
+		return clk;
+
+	return input_clock(name, clk);
+}
+
+static struct clk __init *input_clock_by_index(const char *name, int idx)
+{
+	struct clk *clk;
+
+	clk = of_clk_get(clockgen.node, 0);
+	if (IS_ERR(clk))
+		return clk;
+
+	return input_clock(name, clk);
+}
+
 static struct clk * __init create_sysclk(const char *name)
 {
 	struct device_node *sysclk;
@@ -974,7 +997,11 @@ static struct clk * __init create_sysclk(const char *name)
 	if (!IS_ERR(clk))
 		return clk;
 
-	clk = sysclk_from_parent(name);
+	clk = input_clock_by_name(name, "sysclk");
+	if (!IS_ERR(clk))
+		return clk;
+
+	clk = input_clock_by_index(name, 0);
 	if (!IS_ERR(clk))
 		return clk;
 
@@ -985,7 +1012,27 @@ static struct clk * __init create_sysclk(const char *name)
 			return clk;
 	}
 
-	pr_err("%s: No input clock\n", __func__);
+	pr_err("%s: No input sysclk\n", __func__);
+	return NULL;
+}
+
+static struct clk * __init create_coreclk(const char *name)
+{
+	struct clk *clk;
+
+	clk = input_clock_by_name(name, "coreclk");
+	if (!IS_ERR(clk))
+		return clk;
+
+	/*
+	 * This indicates a mix of legacy nodes with the new coreclk
+	 * mechanism, which should never happen.  If this error occurs,
+	 * don't use the wrong input clock just because coreclk isn't
+	 * ready yet.
+	 */
+	if (WARN_ON(PTR_ERR(clk) == -EPROBE_DEFER))
+		return clk;
+
 	return NULL;
 }
 
@@ -1008,11 +1055,19 @@ static void __init create_one_pll(struct clockgen *cg, int idx)
 	u32 __iomem *reg;
 	u32 mult;
 	struct clockgen_pll *pll = &cg->pll[idx];
+	const char *input = "cg-sysclk";
 	int i;
 
 	if (!(cg->info.pll_mask & (1 << idx)))
 		return;
 
+	if (cg->coreclk && idx != PLATFORM_PLL) {
+		if (IS_ERR(cg->coreclk))
+			return;
+
+		input = "cg-coreclk";
+	}
+
 	if (cg->info.flags & CG_VER3) {
 		switch (idx) {
 		case PLATFORM_PLL:
@@ -1063,7 +1118,7 @@ static void __init create_one_pll(struct clockgen *cg, int idx)
 			 "cg-pll%d-div%d", idx, i + 1);
 
 		clk = clk_register_fixed_factor(NULL,
-				pll->div[i].name, "cg-sysclk", 0, mult, i + 1);
+				pll->div[i].name, input, 0, mult, i + 1);
 		if (IS_ERR(clk)) {
 			pr_err("%s: %s: register failed %ld\n",
 			       __func__, pll->div[i].name, PTR_ERR(clk));
@@ -1200,6 +1255,13 @@ static struct clk *clockgen_clk_get(struct of_phandle_args *clkspec, void *data)
 			goto bad_args;
 		clk = pll->div[idx].clk;
 		break;
+	case 5:
+		if (idx != 0)
+			goto bad_args;
+		clk = cg->coreclk;
+		if (IS_ERR(clk))
+			clk = NULL;
+		break;
 	default:
 		goto bad_args;
 	}
@@ -1311,6 +1373,7 @@ static void __init clockgen_init(struct device_node *np)
 		clockgen.info.flags |= CG_CMUX_GE_PLAT;
 
 	clockgen.sysclk = create_sysclk("cg-sysclk");
+	clockgen.coreclk = create_coreclk("cg-coreclk");
 	create_plls(&clockgen);
 	create_muxes(&clockgen);
 
-- 
2.1.0.27.g96db324

[PATCH 2/2] clk: qoriq: Separate root input clock for core PLLs on ls1012a

[Scott Wood]

On Wed, 2017-02-15 at 13:47 +0800, yuantian.tang at nxp.com wrote:
> From: Tang Yuantian <Yuantian.Tang@nxp.com>
> 
> ls1012a has separate input root clocks for core PLLs versus the
> platform PLL, with the latter described as sysclk in the hw docs.
> If a second input clock, named "coreclk", is present, this clock will be
> used for the core PLLs.
> 
> Signed-off-by: Scott Wood <oss@buserror.net>
> Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
> ---
> ?drivers/clk/clk-qoriq.c | 91 +++++++++++++++++++++++++++++++++++++++++-----

Why did you reset the author on these patches? ?Have you changed anything?
?Why aren't they marked either v2 or resend?

-Scott

[PATCH 2/2] clk: qoriq: Separate root input clock for core PLLs on ls1012a

[Y.T. Tang]

> -----Original Message-----
> From: Scott Wood [mailto:oss at buserror.net]
> Sent: Thursday, February 16, 2017 2:37 AM
> To: Y.T. Tang <yuantian.tang@nxp.com>; mturquette at baylibre.com
> Cc: sboyd at codeaurora.org; robh+dt at kernel.org; mark.rutland at arm.com;
> linux-clk at vger.kernel.org; devicetree at vger.kernel.org; linux-
> kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH 2/2] clk: qoriq: Separate root input clock for core PLLs on
> ls1012a
> 
> On Wed, 2017-02-15 at 13:47 +0800, yuantian.tang at nxp.com wrote:
> > From: Tang Yuantian <Yuantian.Tang@nxp.com>
> >
> > ls1012a has separate input root clocks for core PLLs versus the
> > platform PLL, with the latter described as sysclk in the hw docs.
> > If a second input clock, named "coreclk", is present, this clock will
> > be used for the core PLLs.
> >
> > Signed-off-by: Scott Wood <oss@buserror.net>
> > Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
> > ---
> > ?drivers/clk/clk-qoriq.c | 91
> > +++++++++++++++++++++++++++++++++++++++++-----
> 
> Why did you reset the author on these patches? ?Have you changed anything?
> ?Why aren't they marked either v2 or resend?
> 

I should have marked as v2 or resend. If anything changed, I take it over and dropped the 2/3 patch in your original patch set to speed up the merge, which I think so.
This patch set blocks other patches and 20 days passed, no any action on it. We can't account on you to push it. That's why I take it over and resend it.

All in all, what you suggest to do to make them get accepted ASAP?

Regards,
Yuantian
> -Scott

[PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk

[Y.T. Tang]

PING!

Regards,
Yuantian

> -----Original Message-----
> From: yuantian.tang at nxp.com [mailto:yuantian.tang at nxp.com]
> Sent: Wednesday, February 15, 2017 1:48 PM
> To: mturquette at baylibre.com
> Cc: sboyd at codeaurora.org; robh+dt at kernel.org; mark.rutland at arm.com;
> linux-clk at vger.kernel.org; devicetree at vger.kernel.org; linux-
> kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org; Y.T. Tang
> <yuantian.tang@nxp.com>; Scott Wood <oss@buserror.net>; Y.T. Tang
> <yuantian.tang@nxp.com>
> Subject: [PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk
> 
> From: Tang Yuantian <Yuantian.Tang@nxp.com>
> 
> ls1012a has separate input root clocks for core PLLs versus the platform PLL,
> with the latter described as sysclk in the hw docs.
> Update the qoriq-clock binding to allow a second input clock, named
> "coreclk".  If present, this clock will be used for the core PLLs.
> 
> Signed-off-by: Scott Wood <oss@buserror.net>
> Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
> ---
>  Documentation/devicetree/bindings/clock/qoriq-clock.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> index df9cb5a..97a9666 100644
> --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> @@ -55,6 +55,11 @@ Optional properties:
>  - clocks: If clock-frequency is not specified, sysclk may be provided
>  	as an input clock.  Either clock-frequency or clocks must be
>  	provided.
> +	A second input clock, called "coreclk", may be provided if
> +	core PLLs are based on a different input clock from the
> +	platform PLL.
> +- clock-names: Required if a coreclk is present.  Valid names are
> +	"sysclk" and "coreclk".
> 
>  2. Clock Provider
> 
> @@ -71,6 +76,7 @@ second cell is the clock index for the specified type.
>  	2	hwaccel		index (n in CLKCGnHWACSR)
>  	3	fman		0 for fm1, 1 for fm2
>  	4	platform pll	0=pll, 1=pll/2, 2=pll/3, 3=pll/4
> +	5	coreclk		must be 0
> 
>  3. Example
> 
> --
> 2.1.0.27.g96db324

[PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk

[Rob Herring]

On Wed, Feb 15, 2017 at 01:47:35PM +0800, yuantian.tang at nxp.com wrote:
> From: Tang Yuantian <Yuantian.Tang@nxp.com>
> 
> ls1012a has separate input root clocks for core PLLs versus the platform
> PLL, with the latter described as sysclk in the hw docs.
> Update the qoriq-clock binding to allow a second input clock, named
> "coreclk".  If present, this clock will be used for the core PLLs.
> 
> Signed-off-by: Scott Wood <oss@buserror.net>
> Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
> ---
>  Documentation/devicetree/bindings/clock/qoriq-clock.txt | 6 ++++++
>  1 file changed, 6 insertions(+)

The change looks fine, but sounds like Scott should remain the author 
(or agree he shouldn't be).

> 
> diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> index df9cb5a..97a9666 100644
> --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> @@ -55,6 +55,11 @@ Optional properties:
>  - clocks: If clock-frequency is not specified, sysclk may be provided
>  	as an input clock.  Either clock-frequency or clocks must be
>  	provided.
> +	A second input clock, called "coreclk", may be provided if
> +	core PLLs are based on a different input clock from the
> +	platform PLL.
> +- clock-names: Required if a coreclk is present.  Valid names are
> +	"sysclk" and "coreclk".
>  
>  2. Clock Provider
>  
> @@ -71,6 +76,7 @@ second cell is the clock index for the specified type.
>  	2	hwaccel		index (n in CLKCGnHWACSR)
>  	3	fman		0 for fm1, 1 for fm2
>  	4	platform pll	0=pll, 1=pll/2, 2=pll/3, 3=pll/4
> +	5	coreclk		must be 0
>  
>  3. Example
>  
> -- 
> 2.1.0.27.g96db324
> 

[PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk

[Y.T. Tang]

Hi Rob,

> -----Original Message-----
> From: Rob Herring [mailto:robh at kernel.org]
> Sent: Tuesday, February 28, 2017 1:19 AM
> To: Y.T. Tang <yuantian.tang@nxp.com>
> Cc: mturquette at baylibre.com; sboyd at codeaurora.org;
> mark.rutland at arm.com; linux-clk at vger.kernel.org;
> devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org; Scott Wood <oss@buserror.net>
> Subject: Re: [PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk
> 
> On Wed, Feb 15, 2017 at 01:47:35PM +0800, yuantian.tang at nxp.com wrote:
> > From: Tang Yuantian <Yuantian.Tang@nxp.com>
> >
> > ls1012a has separate input root clocks for core PLLs versus the
> > platform PLL, with the latter described as sysclk in the hw docs.
> > Update the qoriq-clock binding to allow a second input clock, named
> > "coreclk".  If present, this clock will be used for the core PLLs.
> >
> > Signed-off-by: Scott Wood <oss@buserror.net>
> > Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/clock/qoriq-clock.txt | 6 ++++++
> >  1 file changed, 6 insertions(+)
> 
> The change looks fine, but sounds like Scott should remain the author (or
> agree he shouldn't be).
> 
Sure, please make Scott the author and apply this patch set.

Regards,
Yuantian

> >
> > diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> > b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> > index df9cb5a..97a9666 100644
> > --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> > +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> > @@ -55,6 +55,11 @@ Optional properties:
> >  - clocks: If clock-frequency is not specified, sysclk may be provided
> >  	as an input clock.  Either clock-frequency or clocks must be
> >  	provided.
> > +	A second input clock, called "coreclk", may be provided if
> > +	core PLLs are based on a different input clock from the
> > +	platform PLL.
> > +- clock-names: Required if a coreclk is present.  Valid names are
> > +	"sysclk" and "coreclk".
> >
> >  2. Clock Provider
> >
> > @@ -71,6 +76,7 @@ second cell is the clock index for the specified type.
> >  	2	hwaccel		index (n in CLKCGnHWACSR)
> >  	3	fman		0 for fm1, 1 for fm2
> >  	4	platform pll	0=pll, 1=pll/2, 2=pll/3, 3=pll/4
> > +	5	coreclk		must be 0
> >
> >  3. Example
> >
> > --
> > 2.1.0.27.g96db324
> >

[PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk

[Rob Herring]

On Tue, Feb 28, 2017 at 7:45 PM, Y.T. Tang <yuantian.tang@nxp.com> wrote:
> Hi Rob,
>
>> -----Original Message-----
>> From: Rob Herring [mailto:robh at kernel.org]
>> Sent: Tuesday, February 28, 2017 1:19 AM
>> To: Y.T. Tang <yuantian.tang@nxp.com>
>> Cc: mturquette at baylibre.com; sboyd at codeaurora.org;
>> mark.rutland at arm.com; linux-clk at vger.kernel.org;
>> devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; linux-arm-
>> kernel at lists.infradead.org; Scott Wood <oss@buserror.net>
>> Subject: Re: [PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk
>>
>> On Wed, Feb 15, 2017 at 01:47:35PM +0800, yuantian.tang at nxp.com wrote:
>> > From: Tang Yuantian <Yuantian.Tang@nxp.com>
>> >
>> > ls1012a has separate input root clocks for core PLLs versus the
>> > platform PLL, with the latter described as sysclk in the hw docs.
>> > Update the qoriq-clock binding to allow a second input clock, named
>> > "coreclk".  If present, this clock will be used for the core PLLs.
>> >
>> > Signed-off-by: Scott Wood <oss@buserror.net>
>> > Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
>> > ---
>> >  Documentation/devicetree/bindings/clock/qoriq-clock.txt | 6 ++++++
>> >  1 file changed, 6 insertions(+)
>>
>> The change looks fine, but sounds like Scott should remain the author (or
>> agree he shouldn't be).
>>
> Sure, please make Scott the author and apply this patch set.

Fixing the author is your job. Plus you sent this TO Mike, so I'm
assuming you only want my ack and Mike will apply.

Rob

[PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk

[Y.T. Tang]

Hi Michael and Stephen,

This patch set was acked by Rob Herring. Do you have any comments on them?

BTW:  Scott should stay in author, do I need to resend them with author changed or you can change it when applying?

Regards,
Yuantian

> -----Original Message-----
> From: Rob Herring [mailto:robh at kernel.org]
> Sent: Tuesday, February 28, 2017 1:19 AM
> To: Y.T. Tang
> Cc: mturquette at baylibre.com; sboyd at codeaurora.org;
> mark.rutland at arm.com; linux-clk at vger.kernel.org;
> devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org; Scott Wood
> Subject: Re: [PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk
> 
> On Wed, Feb 15, 2017 at 01:47:35PM +0800, yuantian.tang at nxp.com wrote:
> > From: Tang Yuantian <Yuantian.Tang@nxp.com>
> >
> > ls1012a has separate input root clocks for core PLLs versus the
> > platform PLL, with the latter described as sysclk in the hw docs.
> > Update the qoriq-clock binding to allow a second input clock, named
> > "coreclk".  If present, this clock will be used for the core PLLs.
> >
> > Signed-off-by: Scott Wood <oss@buserror.net>
> > Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/clock/qoriq-clock.txt | 6 ++++++
> >  1 file changed, 6 insertions(+)
> 
> The change looks fine, but sounds like Scott should remain the author (or
> agree he shouldn't be).
> 
> >
> > diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> > b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> > index df9cb5a..97a9666 100644
> > --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> > +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
> > @@ -55,6 +55,11 @@ Optional properties:
> >  - clocks: If clock-frequency is not specified, sysclk may be provided
> >  	as an input clock.  Either clock-frequency or clocks must be
> >  	provided.
> > +	A second input clock, called "coreclk", may be provided if
> > +	core PLLs are based on a different input clock from the
> > +	platform PLL.
> > +- clock-names: Required if a coreclk is present.  Valid names are
> > +	"sysclk" and "coreclk".
> >
> >  2. Clock Provider
> >
> > @@ -71,6 +76,7 @@ second cell is the clock index for the specified type.
> >  	2	hwaccel		index (n in CLKCGnHWACSR)
> >  	3	fman		0 for fm1, 1 for fm2
> >  	4	platform pll	0=pll, 1=pll/2, 2=pll/3, 3=pll/4
> > +	5	coreclk		must be 0
> >
> >  3. Example
> >
> > --
> > 2.1.0.27.g96db324
> >

[PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk

[sboyd at codeaurora.org]

On 03/09, Y.T. Tang wrote:
> Hi Michael and Stephen,
> 
> This patch set was acked by Rob Herring. Do you have any comments on them?
> 
> BTW:  Scott should stay in author, do I need to resend them with author changed or you can change it when applying?
> 

Please resend these two patches.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk

[Andy Tang]

Hi,

> -----Original Message-----
> From: sboyd at codeaurora.org [mailto:sboyd at codeaurora.org]
> Sent: Saturday, July 22, 2017 6:03 AM
> To: Andy Tang <andy.tang@nxp.com>
> Cc: mturquette at baylibre.com; mark.rutland at arm.com; linux-
> clk at vger.kernel.org; devicetree at vger.kernel.org; linux-
> kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org; Scott Wood
> <oss@buserror.net>; Rob Herring <robh@kernel.org>
> Subject: Re: [PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk
> 
> On 03/09, Y.T. Tang wrote:
> > Hi Michael and Stephen,
> >
> > This patch set was acked by Rob Herring. Do you have any comments on
> them?
> >
> > BTW:  Scott should stay in author, do I need to resend them with author
> changed or you can change it when applying?
> >
> 
> Please resend these two patches.

Those two patches have been merged several months ago. No need to resend.
Thanks.

Regards,
Andy

> 
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a
> Linux Foundation Collaborative Project