* [PATCH 0/2] ARM: davinci_all_defconfig: enable modules required by vpif
@ 2017-02-16 17:58 Bartosz Golaszewski
2017-02-16 17:58 ` [PATCH 1/2] ARM: davinci_all_defconfig: enable VPIF display modules Bartosz Golaszewski
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Bartosz Golaszewski @ 2017-02-16 17:58 UTC (permalink / raw)
To: linux-arm-kernel
The first patch enables the modules needed for vpif display.
The second enables IRQ support for the pca953x driver needed for
correct vpif capture support on the da850-evm board with the UI
expander.
Bartosz Golaszewski (2):
ARM: davinci_all_defconfig: enable VPIF display modules
ARM: davinci_all_defconfig: enable IRQ support for pca953x
arch/arm/configs/davinci_all_defconfig | 3 +++
1 file changed, 3 insertions(+)
--
2.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH 1/2] ARM: davinci_all_defconfig: enable VPIF display modules
2017-02-16 17:58 [PATCH 0/2] ARM: davinci_all_defconfig: enable modules required by vpif Bartosz Golaszewski
@ 2017-02-16 17:58 ` Bartosz Golaszewski
2017-02-16 17:58 ` [PATCH 2/2] ARM: davinci_all_defconfig: enable IRQ support for pca953x Bartosz Golaszewski
2017-02-20 9:43 ` [PATCH 0/2] ARM: davinci_all_defconfig: enable modules required by vpif Sekhar Nori
2 siblings, 0 replies; 4+ messages in thread
From: Bartosz Golaszewski @ 2017-02-16 17:58 UTC (permalink / raw)
To: linux-arm-kernel
Enable the VPIF display module and the video encoder present on the
da850-evm UI board.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/configs/davinci_all_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index c8663ea..bf2c0ca 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -133,9 +133,11 @@ CONFIG_REGULATOR_TPS6507X=y
CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY=m
CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=m
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_TVP514X=m
+CONFIG_VIDEO_ADV7343=m
CONFIG_DRM=m
CONFIG_DRM_TILCDC=m
CONFIG_DRM_DUMB_VGA_DAC=m
--
2.9.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] ARM: davinci_all_defconfig: enable IRQ support for pca953x
2017-02-16 17:58 [PATCH 0/2] ARM: davinci_all_defconfig: enable modules required by vpif Bartosz Golaszewski
2017-02-16 17:58 ` [PATCH 1/2] ARM: davinci_all_defconfig: enable VPIF display modules Bartosz Golaszewski
@ 2017-02-16 17:58 ` Bartosz Golaszewski
2017-02-20 9:43 ` [PATCH 0/2] ARM: davinci_all_defconfig: enable modules required by vpif Sekhar Nori
2 siblings, 0 replies; 4+ messages in thread
From: Bartosz Golaszewski @ 2017-02-16 17:58 UTC (permalink / raw)
To: linux-arm-kernel
We need IRQs from the tca6416 expander for vpif capture to work on the
da850-evm board.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/configs/davinci_all_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index bf2c0ca..91557ae 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -121,6 +121,7 @@ CONFIG_PINCTRL_DA850_PUPD=m
CONFIG_PINCTRL_SINGLE=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_WATCHDOG=y
--
2.9.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 0/2] ARM: davinci_all_defconfig: enable modules required by vpif
2017-02-16 17:58 [PATCH 0/2] ARM: davinci_all_defconfig: enable modules required by vpif Bartosz Golaszewski
2017-02-16 17:58 ` [PATCH 1/2] ARM: davinci_all_defconfig: enable VPIF display modules Bartosz Golaszewski
2017-02-16 17:58 ` [PATCH 2/2] ARM: davinci_all_defconfig: enable IRQ support for pca953x Bartosz Golaszewski
@ 2017-02-20 9:43 ` Sekhar Nori
2 siblings, 0 replies; 4+ messages in thread
From: Sekhar Nori @ 2017-02-20 9:43 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday 16 February 2017 11:28 PM, Bartosz Golaszewski wrote:
> The first patch enables the modules needed for vpif display.
>
> The second enables IRQ support for the pca953x driver needed for
> correct vpif capture support on the da850-evm board with the UI
> expander.
Applied to v4.12/defconfig
Thanks,
Sekhar
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-02-20 9:43 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-02-16 17:58 [PATCH 0/2] ARM: davinci_all_defconfig: enable modules required by vpif Bartosz Golaszewski
2017-02-16 17:58 ` [PATCH 1/2] ARM: davinci_all_defconfig: enable VPIF display modules Bartosz Golaszewski
2017-02-16 17:58 ` [PATCH 2/2] ARM: davinci_all_defconfig: enable IRQ support for pca953x Bartosz Golaszewski
2017-02-20 9:43 ` [PATCH 0/2] ARM: davinci_all_defconfig: enable modules required by vpif Sekhar Nori
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).