From: geert+renesas@glider.be (Geert Uytterhoeven)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] arm64: dts: r8a7795: Add Cortex-A53 CPU cores
Date: Fri, 17 Feb 2017 16:04:09 +0100 [thread overview]
Message-ID: <1487343849-32616-1-git-send-email-geert+renesas@glider.be> (raw)
From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
This patch adds Cortex-A53 CPU cores to r8a7795 SoC for a total of 8
cores (4 x Cortex-A57 + 4 x Cortex-A53).
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
[geert: Add power-domains and next-level-cache properties]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
This patch describes the hardware; actual enabling of the CPU depends on
the PSCI firmware.
With the current firmware version (v2.16.0), only the CA57 CPU cores are
enabled, hence this patch does not introduce undeterministic scheduling
behavior due to migration between big and LITTLE cores.
v3:
- Link recently added CPU nodes 100-103 to their L2 cache nodes,
v2:
- Rebased.
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 58 ++++++++++++++++++++++++++++----
1 file changed, 51 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 7f2434adb757498f..6148e514eb648288 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -73,6 +73,42 @@
enable-method = "psci";
};
+ a53_0: cpu at 100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x100>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU0>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_1: cpu at 101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x101>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU1>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_2: cpu at 102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x102>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU2>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_3: cpu at 103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x103>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU3>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
L2_CA57: cache-controller at 0 {
compatible = "cache";
reg = <0>;
@@ -166,7 +202,7 @@
<0x0 0xf1040000 0 0x20000>,
<0x0 0xf1060000 0 0x20000>;
interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -307,23 +343,31 @@
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&a57_0>,
<&a57_1>,
<&a57_2>,
- <&a57_3>;
+ <&a57_3>,
+ <&a53_0>,
+ <&a53_1>,
+ <&a53_2>,
+ <&a53_3>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
cpg: clock-controller at e6150000 {
--
1.9.1
next reply other threads:[~2017-02-17 15:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-17 15:04 Geert Uytterhoeven [this message]
2017-02-17 18:07 ` [PATCH v3] arm64: dts: r8a7795: Add Cortex-A53 CPU cores Mark Rutland
2017-02-23 14:07 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487343849-32616-1-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).