From: jbrunet@baylibre.com (Jerome Brunet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay
Date: Mon, 20 Feb 2017 10:08:39 +0100 [thread overview]
Message-ID: <1487581719.3734.1.camel@baylibre.com> (raw)
In-Reply-To: <20170219214149.30418-1-martin.blumenstingl@googlemail.com>
On Sun, 2017-02-19 at 22:41 +0100, Martin Blumenstingl wrote:
> This series adds the reset GPIOs for the (external) ethernet PHYs on
> all
> GXBB boards.
> Additionally it provides a ethernet PHY node which can be used to
> specify
> PHY-specific properties (this may be required if more boards require
> the
> "eee-broken-1000t" for the RTL8211F ethernet PHY). To make all board
> .dts
> consistent I chose to add the PHY node also for boards which don't
> have a
> RTL8211F PHY.
>
Looks good to me. For the patchset:
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
>
> Martin Blumenstingl (9):
> ? ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO
> ? ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO
> ? ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO
> ? ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset
> GPIO
> ? ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO
> ? ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset
> GPIO
> ? ARM64: dts: meson-gxbb-p201: fix ethernet support
> ? ARM64: dts: amlogic: add the ethernet TX delay configuration
> ? ARM64: dts: meson-gx: remove the phy-mode property from meson-gx
>
> ?arch/arm64/boot/dts/amlogic/meson-gx.dtsi??????????|??1 -
> ?.../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts????| 17
> ++++++++++++++
> ?.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts |??7 ++++++
> ?arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts????| 25
> +++++++++++++++++++++
> ?arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts????| 11 +++++++++
> ?arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi???|??6 -----
> ?.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi??????| 21
> ++++++++++++++++-
> ?.../boot/dts/amlogic/meson-gxbb-wetek-hub.dts??????| 26
> ++++++++++++++++++++++
> ?.../boot/dts/amlogic/meson-gxbb-wetek-play2.dts????| 26
> ++++++++++++++++++++++
> ?.../boot/dts/amlogic/meson-gxl-s905d-p230.dts??????|??2 ++
> ?.../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts |??2 ++
> ?arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts?????|??2 ++
> ?12 files changed, 138 insertions(+), 8 deletions(-)
>
next prev parent reply other threads:[~2017-02-20 9:08 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-02 23:47 [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 1/5] ARM64: dts: meson-gx: move the MDIO node to meson-gx Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 2/5] ARM64: dts: meson-gxbb-odroidc2: add reset for the ethernet PHY Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 3/5] ARM64: dts: meson-gxbb-p20x: " Martin Blumenstingl
2017-01-17 19:22 ` Jerome Brunet
2017-01-17 21:26 ` Martin Blumenstingl
2017-01-18 10:36 ` Jerome Brunet
2017-01-18 14:26 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 4/5] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 5/5] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2016-12-17 20:36 ` [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2017-01-09 22:52 ` Kevin Hilman
2017-01-17 19:23 ` Jerome Brunet
2017-01-17 21:09 ` Martin Blumenstingl
2017-01-17 22:26 ` Jerome Brunet
2017-01-17 22:44 ` Martin Blumenstingl
2017-01-18 19:28 ` Kevin Hilman
2017-01-18 19:40 ` Martin Blumenstingl
2017-01-19 9:47 ` Jerome Brunet
2017-01-20 13:26 ` [PATCH v2 0/9] " Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 2/9] ARM64: dts: meson-gxbb-p201: " Martin Blumenstingl
2017-01-20 13:31 ` Neil Armstrong
2017-01-20 13:33 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 7/9] ARM64: dts: meson-gxbb-p20x: remove the ethernet node Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 0/9] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-01-20 16:18 ` Andrew Lunn
2017-01-20 16:21 ` Andrew Lunn
2017-01-20 17:07 ` Martin Blumenstingl
2017-01-20 17:46 ` Andrew Lunn
2017-01-22 16:48 ` Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-20 16:34 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-20 15:27 ` [PATCH v3 0/9] meson-gx: reset RGMII PHYs and configure TX delay Jerome Brunet
2017-01-20 15:32 ` Martin Blumenstingl
2017-01-20 19:46 ` Kevin Hilman
2017-01-22 18:10 ` [PATCH v4 " Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-23 18:55 ` [PATCH v4 0/9] meson-gx: reset RGMII PHYs and configure TX delay Kevin Hilman
2017-01-23 19:02 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 " Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-02-20 9:08 ` Jerome Brunet [this message]
2017-03-02 17:02 ` [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487581719.3734.1.camel@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).