From mboxrd@z Thu Jan 1 00:00:00 1970 From: kraxel@redhat.com (Gerd Hoffmann) Date: Tue, 21 Feb 2017 10:07:06 +0100 Subject: [PATCH v3 7/7] ARM: dts: bcm2837: add &sdhci and &sdhost In-Reply-To: <1487668026-7100-1-git-send-email-kraxel@redhat.com> References: <1487668026-7100-1-git-send-email-kraxel@redhat.com> Message-ID: <1487668026-7100-8-git-send-email-kraxel@redhat.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org For the raspberry pi 3 we'll need both sdhci (handles sdio wifi) and sdhost (handles sdcard). Signed-off-by: Gerd Hoffmann Acked-by: Eric Anholt --- arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts index c309633..972f14d 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts @@ -22,3 +22,20 @@ &uart1 { status = "okay"; }; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + status = "okay"; + bus-width = <4>; + non-removable; +}; + +/* SDHOST is used to drive the SD card */ +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; + bus-width = <4>; +}; -- 1.8.3.1