[PATCH v20 2/4] mailbox: mediatek: Add Mediatek CMDQ driver

Horng-Shyang Liao
2017-02-09T12:03:01Z

On Mon, 2017-02-06 at 13:37 +0800, Horng-Shyang Liao wrote:
> Hi Jassi,
>
> On Wed, 2017-02-01 at 10:52 +0530, Jassi Brar wrote:
> > On Thu, Jan 26, 2017 at 2:07 PM, Horng-Shyang Liao <hs.liao@mediatek.com> wrote:
> > > Hi Jassi,
> > >
> > > On Thu, 2017-01-26 at 10:08 +0530, Jassi Brar wrote:
> > >> On Wed, Jan 4, 2017 at 8:36 AM, HS Liao <hs.liao@mediatek.com> wrote:
> > >>
> > >> > diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> > >> > new file mode 100644
> > >> > index 0000000..747bcd3
> > >> > --- /dev/null
> > >> > +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> > >>
> > >> ...
> > >>
> > >> > +static void cmdq_task_exec(struct cmdq_pkt *pkt, struct cmdq_thread *thread)
> > >> > +{
> > >> > + struct cmdq *cmdq;
> > >> > + struct cmdq_task *task;
> > >> > + unsigned long curr_pa, end_pa;
> > >> > +
> > >> > + cmdq = dev_get_drvdata(thread->chan->mbox->dev);
> > >> > +
> > >> > + /* Client should not flush new tasks if suspended. */
> > >> > + WARN_ON(cmdq->suspended);
> > >> > +
> > >> > + task = kzalloc(sizeof(*task), GFP_ATOMIC);
> > >> > + task->cmdq = cmdq;
> > >> > + INIT_LIST_HEAD(&task->list_entry);
> > >> > + task->pa_base = dma_map_single(cmdq->mbox.dev, pkt->va_base,
> > >> > + pkt->cmd_buf_size, DMA_TO_DEVICE);
> > >> >
> > >> You seem to parse the requests and responses, that should ideally be
> > >> done in client driver.
> > >> Also, we are here in atomic context, can you move it in client driver
> > >> (before the spin_lock)?
> > >> Maybe by adding a new 'pa_base' member as well in 'cmdq_pkt'.
> > >
> > > will do
>
> I agree with moving dma_map_single out from spin_lock.
>
> However, mailbox clients cannot map virtual memory to mailbox
> controller's device for DMA. In our previous discussion, we decided to
> remove mailbox_controller.h from clients to restrict their capabilities.
>
> Please take a look at following link from 2016/9/22 to 2016/9/30 about
> mailbox_controller.h.
> https://patchwork.kernel.org/patch/9312953/
>
> Is there any better place to do dma_map_single?

Hi Jassi,

According to previous discussion, we have two requirements:
(1) CMDQ clients should not access mailbox_controller.h;
(2) dma_map_single should not put inside spin_lock.

I think a trade-off solution is to put in mtk-cmdq-helper.c.
Although it is a mailbox client, it is not a CMDQ client.
We can include mailbox_controller.h in mtk-cmdq-helper.c
(instead of mtk-cmdq.h), and then map dma at cmdq_pkt_flush_async
before mbox_send_message.

pkt->pa_base = dma_map_single(client->chan->mbox->dev, pkt->va_base,
pkt->cmd_buf_size, DMA_TO_DEVICE);

What do you think?

Thanks,
HS

> > >> ....
> > >> > +
> > >> > + cmdq->mbox.num_chans = CMDQ_THR_MAX_COUNT;
> > >> > + cmdq->mbox.ops = &cmdq_mbox_chan_ops;
> > >> > + cmdq->mbox.of_xlate = cmdq_xlate;
> > >> > +
> > >> > + /* make use of TXDONE_BY_ACK */
> > >> > + cmdq->mbox.txdone_irq = false;
> > >> > + cmdq->mbox.txdone_poll = false;
> > >> > +
> > >> > + for (i = 0; i < ARRAY_SIZE(cmdq->thread); i++) {
> > >> >
> > >> You mean i < CMDQ_THR_MAX_COUNT
> > >
> > > will do
> > >
> > >> > + cmdq->thread[i].base = cmdq->base + CMDQ_THR_BASE +
> > >> > + CMDQ_THR_SIZE * i;
> > >> > + INIT_LIST_HEAD(&cmdq->thread[i].task_busy_list);
> > >> >
> > >> You seem the queue mailbox requests in this controller driver? why not
> > >> use the mailbox api for that?
> > >>
> > >> > + init_timer(&cmdq->thread[i].timeout);
> > >> > + cmdq->thread[i].timeout.function = cmdq_thread_handle_timeout;
> > >> > + cmdq->thread[i].timeout.data = (unsigned long)&cmdq->thread[i];
> > >> >
> > >> Here again... you seem to ignore the polling mechanism provided by the
> > >> mailbox api, and implement your own.
> > >
> > > The queue is used to record the tasks which are flushed into CMDQ
> > > hardware (GCE). We are handling time critical tasks, so we have to
> > > queue them in GCE rather than a software queue (e.g. mailbox buffer).
> > > Let me use display as an example. Many display tasks are flushed into
> > > CMDQ to wait next vsync event. When vsync event is triggered by display
> > > hardware, GCE needs to process all flushed tasks "within vblank" to
> > > prevent garbage on screen. This is all done by GCE (without CPU)
> > > to fulfill time critical requirement. After GCE finish its work,
> > > it will generate interrupts, and then CMDQ driver will let clients know
> > > which tasks are done.
> > >
> > Does the GCE provide any 'lock' to prevent modifying (by adding tasks
> > to) the GCE h/w buffer when it is processing it at vsync? Otherwise
>
> CPU will suspend GCE when adding a task (cmdq_thread_suspend),
> and resume GCE after adding task is done (cmdq_thread_resume).
> If GCE is processing task(s) at vsync and CPU wants to add a new task
> at the same time, CPU will detect this situation
> (by cmdq_thread_is_in_wfe), resume GCE immediately, and then add
> following task(s) to wait for next vsync event.
> All the above logic is implemented at cmdq_task_exec.
>
> > there maybe race/error. If there is such a 'lock' flag/irq, that could
> > help here. However, you are supposed to know your h/w better, so I
> > will accept this implementation assuming it can't be done any better.
> >
> > Please address other comments and resubmit.
> >
> > Thanks
>
> After we figure out a better solution for dma_map_single issue, I will
> resubmit a new version.
>
> Thanks,
> HS