From mboxrd@z Thu Jan 1 00:00:00 1970 From: florian.vaussard@gmail.com (Florian Vaussard) Date: Sat, 25 Feb 2017 06:54:26 +0100 Subject: [PATCH 3/6] ARM: dts: socfpga: Remove unneeded unit names In-Reply-To: <1488002069-22404-1-git-send-email-florian.vaussard@heig-vd.ch> References: <1488002069-22404-1-git-send-email-florian.vaussard@heig-vd.ch> Message-ID: <1488002069-22404-4-git-send-email-florian.vaussard@heig-vd.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Node eccmgr has a unit name, but do not have a reg property as only the child nodes do have this property. Likewise the usbphy node do not have a reg property. This will trigger the following warnings when compiled with W=1: Node /soc/eccmgr at ffd08140 has a unit name, but no reg property Node /soc/usbphy at 0 has a unit name, but no reg property Remove the superfluous unit names. Signed-off-by: Florian Vaussard --- arch/arm/boot/dts/socfpga.dtsi | 4 ++-- arch/arm/boot/dts/socfpga_arria10.dtsi | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 4dda6d8..25a68af 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -678,7 +678,7 @@ status = "disabled"; }; - eccmgr: eccmgr at ffd08140 { + eccmgr: eccmgr { compatible = "altr,socfpga-ecc-manager"; #address-cells = <1>; #size-cells = <1>; @@ -879,7 +879,7 @@ dma-names = "tx", "rx"; }; - usbphy0: usbphy at 0 { + usbphy0: usbphy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; status = "okay"; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 0332d51..4e1f653 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -649,7 +649,7 @@ reg = <0xffe00000 0x40000>; }; - eccmgr: eccmgr at ffd06000 { + eccmgr: eccmgr { compatible = "altr,socfpga-a10-ecc-manager"; altr,sysmgr-syscon = <&sysmgr>; #address-cells = <1>; @@ -806,7 +806,7 @@ status = "disabled"; }; - usbphy0: usbphy at 0 { + usbphy0: usbphy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; status = "okay"; -- 2.7.4