linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: yangbo.lu@nxp.com (Yangbo Lu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/9] mmc: sdhci-of-esdhc: add tuning block support
Date: Thu, 2 Mar 2017 17:47:26 +0800	[thread overview]
Message-ID: <1488448050-7574-6-git-send-email-yangbo.lu@nxp.com> (raw)
In-Reply-To: <1488448050-7574-1-git-send-email-yangbo.lu@nxp.com>

Add tuning block support for eSDHC.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
 drivers/mmc/host/sdhci-esdhc.h    |  5 +++++
 drivers/mmc/host/sdhci-of-esdhc.c | 17 +++++++++++++++++
 2 files changed, 22 insertions(+)

diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
index 6869567..c4bbd74 100644
--- a/drivers/mmc/host/sdhci-esdhc.h
+++ b/drivers/mmc/host/sdhci-esdhc.h
@@ -53,9 +53,14 @@
 #define ESDHC_CLOCK_HCKEN		0x00000002
 #define ESDHC_CLOCK_IPGEN		0x00000001
 
+/* Tuning Block Control Register */
+#define ESDHC_TBCTL			0x120
+#define ESDHC_TB_EN			0x00000004
+
 /* Control Register for DMA transfer */
 #define ESDHC_DMA_SYSCTL		0x40c
 #define ESDHC_PERIPHERAL_CLK_SEL	0x00080000
+#define ESDHC_FLUSH_ASYNC_FIFO		0x00040000
 #define ESDHC_DMA_SNOOP			0x00000040
 
 #endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index c2619f1..b26a780 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -622,6 +622,21 @@ static int esdhc_signal_voltage_switch(struct sdhci_host *host,
 	}
 }
 
+void esdhc_set_tuning_block(struct sdhci_host *host)
+{
+	u32 val;
+
+	esdhc_clock_enable(host, false);
+	val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+	val |= ESDHC_FLUSH_ASYNC_FIFO;
+	sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
+
+	val = sdhci_readl(host, ESDHC_TBCTL);
+	val |= ESDHC_TB_EN;
+	sdhci_writel(host, val, ESDHC_TBCTL);
+	esdhc_clock_enable(host, true);
+}
+
 #ifdef CONFIG_PM_SLEEP
 static u32 esdhc_proctl;
 static int esdhc_of_suspend(struct device *dev)
@@ -667,6 +682,7 @@ static const struct sdhci_ops sdhci_esdhc_be_ops = {
 	.reset = esdhc_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
 	.start_signal_voltage_switch = esdhc_signal_voltage_switch,
+	.set_tuning_block = esdhc_set_tuning_block,
 };
 
 static const struct sdhci_ops sdhci_esdhc_le_ops = {
@@ -685,6 +701,7 @@ static const struct sdhci_ops sdhci_esdhc_le_ops = {
 	.reset = esdhc_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
 	.start_signal_voltage_switch = esdhc_signal_voltage_switch,
+	.set_tuning_block = esdhc_set_tuning_block,
 };
 
 static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
-- 
2.1.0.27.g96db324

  parent reply	other threads:[~2017-03-02  9:47 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-02  9:47 [PATCH 0/9] Add SD UHS-I and eMMC HS200 support for eSDHC Yangbo Lu
2017-03-02  9:47 ` [PATCH 1/9] mmc: sdhci-of-esdhc: add peripheral clock support Yangbo Lu
2017-03-02  9:47 ` [PATCH 2/9] mmc: sdhci: add a callback for signal voltage switching Yangbo Lu
2017-03-02 14:19   ` Adrian Hunter
2017-03-03  7:38     ` Y.B. Lu
2017-03-02  9:47 ` [PATCH 3/9] mmc: sdhci-of-esdhc: add support for signal voltage switch Yangbo Lu
2017-03-02  9:47 ` [PATCH 4/9] mmc: sdhci: add a callback for using tuning block Yangbo Lu
2017-03-02 14:25   ` Adrian Hunter
2017-03-03  7:39     ` Y.B. Lu
2017-03-02  9:47 ` Yangbo Lu [this message]
2017-03-02  9:47 ` [PATCH 6/9] mmc: sdhci: add a quirk to restore delay in tuning Yangbo Lu
2017-03-02  9:47 ` [PATCH 7/9] mmc: sdhci-of-esdhc: add delay between tuning cycles Yangbo Lu
2017-03-02  9:47 ` [PATCH 8/9] arm64: dts: ls1046a: add clocks property and compatible for eSDHC node Yangbo Lu
2017-03-02  9:47 ` [PATCH 9/9] arm64: dts: ls1046ardb: add MMC HS200/UHS-1 modes support Yangbo Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1488448050-7574-6-git-send-email-yangbo.lu@nxp.com \
    --to=yangbo.lu@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).