From mboxrd@z Thu Jan 1 00:00:00 1970 From: j-keerthy@ti.com (Keerthy) Date: Thu, 9 Mar 2017 13:35:54 +0530 Subject: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree Message-ID: <1489046762-11288-1-git-send-email-j-keerthy@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Currently the slope and offset values for calculating the hot spot temperature of a particular thermal zone is part of driver data. Pass them here instead and obtain the values while of node parsing. Tested for the slope and constant values on DRA7-EVM, OMAP3-BEAGLE. Changes in v2: * Added OMAP3 changes along with DRA7/OMAP4/OMAP5. Keerthy (8): arm: dts: omap3: Add cpu_thermal zone ARM: DRA7: Thermal: Add slope and offset values ARM: OMAP5: Thermal: Add slope and offset values ARM: OMAP443x: Thermal: Add slope and offset values ARM: OMAP4460: Thermal: Add slope and offset values thermal: ti-soc-thermal: Fetch slope and offset from DT thermal: ti-soc-thermal: Remove redundant constants thermal: ti-soc-thermal: Remove redundant code arch/arm/boot/dts/dra7.dtsi | 17 +++ arch/arm/boot/dts/omap3-cpu-thermal.dtsi | 20 +++ arch/arm/boot/dts/omap34xx.dtsi | 8 +- arch/arm/boot/dts/omap36xx.dtsi | 8 +- arch/arm/boot/dts/omap443x.dtsi | 4 + arch/arm/boot/dts/omap4460.dtsi | 4 + arch/arm/boot/dts/omap5.dtsi | 9 ++ .../thermal/ti-soc-thermal/dra752-thermal-data.c | 10 -- .../thermal/ti-soc-thermal/omap3-thermal-data.c | 4 - .../thermal/ti-soc-thermal/omap4-thermal-data.c | 6 - .../thermal/ti-soc-thermal/omap5-thermal-data.c | 4 - drivers/thermal/ti-soc-thermal/ti-bandgap.h | 4 - drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 158 +-------------------- drivers/thermal/ti-soc-thermal/ti-thermal.h | 16 --- 14 files changed, 71 insertions(+), 201 deletions(-) create mode 100644 arch/arm/boot/dts/omap3-cpu-thermal.dtsi -- 1.9.1