From mboxrd@z Thu Jan 1 00:00:00 1970 From: j-keerthy@ti.com (Keerthy) Date: Thu, 9 Mar 2017 13:35:56 +0530 Subject: [PATCH v2 2/8] ARM: DRA7: Thermal: Add slope and offset values In-Reply-To: <1489046762-11288-1-git-send-email-j-keerthy@ti.com> References: <1489046762-11288-1-git-send-email-j-keerthy@ti.com> Message-ID: <1489046762-11288-3-git-send-email-j-keerthy@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Currently the slope and offset values for calculating the hot spot temperature of a particular thermal zone is part of driver data. Pass them here instead and obtain the values while of node parsing. Signed-off-by: Keerthy --- arch/arm/boot/dts/dra7.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 2c9e56f..10e09dc 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1982,6 +1982,23 @@ &cpu_thermal { polling-delay = <500>; /* milliseconds */ + coefficients = <0 2000>; +}; + +&gpu_thermal { + coefficients = <0 2000>; +}; + +&core_thermal { + coefficients = <0 2000>; +}; + +&dspeve_thermal { + coefficients = <0 2000>; +}; + +&iva_thermal { + coefficients = <0 2000>; }; /include/ "dra7xx-clocks.dtsi" -- 1.9.1