From mboxrd@z Thu Jan 1 00:00:00 1970 From: j-keerthy@ti.com (Keerthy) Date: Thu, 9 Mar 2017 13:35:57 +0530 Subject: [PATCH v2 3/8] ARM: OMAP5: Thermal: Add slope and offset values In-Reply-To: <1489046762-11288-1-git-send-email-j-keerthy@ti.com> References: <1489046762-11288-1-git-send-email-j-keerthy@ti.com> Message-ID: <1489046762-11288-4-git-send-email-j-keerthy@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Currently the slope and offset values for calculating the hot spot temperature of a particular thermal zone is part of driver data. Pass them here instead and obtain the values while of node parsing. Signed-off-by: Keerthy --- arch/arm/boot/dts/omap5.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 222155c..eaff2a5 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -1127,6 +1127,15 @@ &cpu_thermal { polling-delay = <500>; /* milliseconds */ + coefficients = <65 (-1791)>; }; /include/ "omap54xx-clocks.dtsi" + +&gpu_thermal { + coefficients = <117 (-2992)>; +}; + +&core_thermal { + coefficients = <0 2000>; +}; -- 1.9.1