From mboxrd@z Thu Jan 1 00:00:00 1970 From: thomas.petazzoni@free-electrons.com (Thomas Petazzoni) Date: Tue, 21 Mar 2017 11:07:38 +0100 Subject: [PATCH] arm: spear6xx: add labels to various nodes in spear600.dtsi Message-ID: <1490090858-8866-1-git-send-email-thomas.petazzoni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Having labels allows to more easily reference nodes in .dts files including spear600.dtsi. Signed-off-by: Thomas Petazzoni --- arch/arm/boot/dts/spear600.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index 9f60a7b..55b23f5 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -57,7 +57,7 @@ status = "disabled"; }; - dma at fc400000 { + dmac: dma at fc400000 { compatible = "arm,pl080", "arm,primecell"; reg = <0xfc400000 0x1000>; interrupt-parent = <&vic1>; @@ -97,7 +97,7 @@ status = "disabled"; }; - ehci at e1800000 { + ehci_usb0: ehci at e1800000 { compatible = "st,spear600-ehci", "usb-ehci"; reg = <0xe1800000 0x1000>; interrupt-parent = <&vic1>; @@ -105,7 +105,7 @@ status = "disabled"; }; - ehci at e2000000 { + ehci_usb1: ehci at e2000000 { compatible = "st,spear600-ehci", "usb-ehci"; reg = <0xe2000000 0x1000>; interrupt-parent = <&vic1>; @@ -113,7 +113,7 @@ status = "disabled"; }; - ohci at e1900000 { + ohci_usb0: ohci at e1900000 { compatible = "st,spear600-ohci", "usb-ohci"; reg = <0xe1900000 0x1000>; interrupt-parent = <&vic1>; @@ -121,7 +121,7 @@ status = "disabled"; }; - ohci at e2100000 { + ohci_usb1: ohci at e2100000 { compatible = "st,spear600-ohci", "usb-ohci"; reg = <0xe2100000 0x1000>; interrupt-parent = <&vic1>; @@ -135,7 +135,7 @@ compatible = "simple-bus"; ranges = <0xd0000000 0xd0000000 0x30000000>; - serial at d0000000 { + uart0: serial at d0000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xd0000000 0x1000>; interrupt-parent = <&vic0>; @@ -143,7 +143,7 @@ status = "disabled"; }; - serial at d0080000 { + uart1: serial at d0080000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xd0080000 0x1000>; interrupt-parent = <&vic0>; -- 2.7.4