From mboxrd@z Thu Jan 1 00:00:00 1970 From: thomas.petazzoni@free-electrons.com (Thomas Petazzoni) Date: Tue, 21 Mar 2017 11:51:49 +0100 Subject: [PATCH v2 2/5] arm: spear6xx: use node labels in spear600-evb.dts In-Reply-To: <1490093512-32665-1-git-send-email-thomas.petazzoni@free-electrons.com> References: <1490093512-32665-1-git-send-email-thomas.petazzoni@free-electrons.com> Message-ID: <1490093512-32665-3-git-send-email-thomas.petazzoni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Now that we have introduced node labels in spear600.dtsi, we can use them for spear600-evb.dts. Signed-off-by: Thomas Petazzoni --- arch/arm/boot/dts/spear600-evb.dts | 156 ++++++++++++++++++------------------- 1 file changed, 76 insertions(+), 80 deletions(-) diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts index d865a89..375eb61 100644 --- a/arch/arm/boot/dts/spear600-evb.dts +++ b/arch/arm/boot/dts/spear600-evb.dts @@ -22,95 +22,91 @@ device_type = "memory"; reg = <0 0x10000000>; }; +}; - ahb { - clcd at fc200000 { - status = "okay"; - }; +&clcd { + status = "okay"; +}; - dma at fc400000 { - status = "okay"; - }; +&dmac { + status = "okay"; +}; - ehci at e1800000 { - status = "okay"; - }; +&ehci_usb0 { + status = "okay"; +}; - ehci at e2000000 { - status = "okay"; - }; +&ehci_usb1 { + status = "okay"; +}; - gmac: ethernet at e0800000 { - phy-mode = "gmii"; - status = "okay"; - }; +&gmac { + phy-mode = "gmii"; + status = "okay"; +}; - ohci at e1900000 { - status = "okay"; - }; +&ohci_usb0 { + status = "okay"; +}; - ohci at e2100000 { - status = "okay"; - }; +&ohci_usb1 { + status = "okay"; +}; - smi: flash at fc000000 { - status = "okay"; - clock-rate=<50000000>; - - flash at f8000000 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0xf8000000 0x800000>; - st,smi-fast-mode; - - partition at 0 { - label = "xloader"; - reg = <0x0 0x10000>; - }; - partition at 10000 { - label = "u-boot"; - reg = <0x10000 0x50000>; - }; - partition at 60000 { - label = "environment"; - reg = <0x60000 0x10000>; - }; - partition at 70000 { - label = "dtb"; - reg = <0x70000 0x10000>; - }; - partition at 80000 { - label = "linux"; - reg = <0x80000 0x310000>; - }; - partition at 390000 { - label = "rootfs"; - reg = <0x390000 0x0>; - }; - }; - }; +&smi { + status = "okay"; + clock-rate=<50000000>; + + flash at f8000000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xf8000000 0x800000>; + st,smi-fast-mode; - apb { - serial at d0000000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <>; - }; - - serial at d0080000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <>; - }; - - rtc at fc900000 { - status = "okay"; - }; - - i2c at d0200000 { - clock-frequency = <400000>; - status = "okay"; - }; + partition at 0 { + label = "xloader"; + reg = <0x0 0x10000>; + }; + partition at 10000 { + label = "u-boot"; + reg = <0x10000 0x50000>; + }; + partition at 60000 { + label = "environment"; + reg = <0x60000 0x10000>; + }; + partition at 70000 { + label = "dtb"; + reg = <0x70000 0x10000>; + }; + partition at 80000 { + label = "linux"; + reg = <0x80000 0x310000>; + }; + partition at 390000 { + label = "rootfs"; + reg = <0x390000 0x0>; }; }; }; + +&uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&rtc { + status = "okay"; +}; + +&i2c { + clock-frequency = <400000>; + status = "okay"; +}; -- 2.7.4