From mboxrd@z Thu Jan 1 00:00:00 1970 From: jagan@openedev.com (Jagan Teki) Date: Wed, 22 Mar 2017 16:36:48 +0530 Subject: [PATCH v7 3/3] ARM: dts: imx6q-icore: Add touchscreen node In-Reply-To: <1490180808-2856-1-git-send-email-jagan@openedev.com> References: <1490180808-2856-1-git-send-email-jagan@openedev.com> Message-ID: <1490180808-2856-3-git-send-email-jagan@openedev.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Jagan Teki max11801 touchscreen on Engicam iCoreM6 Quad module is connected via i2c1, so add max11801: touchscreen at 48 on i2c1. Cc: Domenico Acri Cc: Matteo Lisi Cc: Michael Trimarchi Cc: Shawn Guo Signed-off-by: Jagan Teki --- Changes for v7: - add vendor prefix as maxim on compatible Changes for v6: - Replace the lable and name of the node ts: max11801 => max11801: touchscreen at 48 Changes for v5: - %s/arm/ARM/g with subject prefix Changes for v4: - Newly added patch arch/arm/boot/dts/imx6q-icore.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts index 73f34d1..70cc8b2 100644 --- a/arch/arm/boot/dts/imx6q-icore.dts +++ b/arch/arm/boot/dts/imx6q-icore.dts @@ -58,6 +58,15 @@ status = "okay"; }; +&i2c1 { + max11801: touchscreen at 48 { + compatible = "maxim,max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 2>; + }; +}; + &ldb { status = "okay"; -- 1.9.1