From: jbrunet@baylibre.com (Jerome Brunet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2,1/3] meson_uart: expose CLKID_UARTx
Date: Tue, 28 Mar 2017 17:51:17 +0200 [thread overview]
Message-ID: <1490716277.20764.6.camel@baylibre.com> (raw)
In-Reply-To: <20170328092545.4644-2-hgkr.klein@gmail.com>
On Tue, 2017-03-28 at 11:25 +0200, Helmut Klein wrote:
> Expose the clock ids for the three none AO uarts to the dt-bindings
Are they all used in the device tree ?
We try to only expose what we need in the DT
The recent discussion over CLKID_CPUCLK proved it was a sane thing to do.
>
> Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
> ---
> ?drivers/clk/meson/gxbb.h??????????????| 6 +++---
> ?include/dt-bindings/clock/gxbb-clkc.h | 3 +++
> ?2 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
> index 8ee2022ce5d5..1edfaa5fe307 100644
> --- a/drivers/clk/meson/gxbb.h
> +++ b/drivers/clk/meson/gxbb.h
> @@ -194,7 +194,7 @@
> ?/* #define CLKID_SAR_ADC */
> ?#define CLKID_SMART_CARD ??24
> ?#define CLKID_RNG0 ??25
> -#define CLKID_UART0 ??26
> +/* CLKID_UART0 */
> ?#define CLKID_SDHC ??27
> ?#define CLKID_STREAM ??28
> ?#define CLKID_ASYNC_FIFO ??29
> @@ -216,7 +216,7 @@
> ?#define CLKID_ADC ??45
> ?#define CLKID_BLKMV ??46
> ?#define CLKID_AIU ??47
> -#define CLKID_UART1 ??48
> +/* CLKID_UART1 */
> ?#define CLKID_G2D ??49
> ?/* CLKID_USB0 */
> ?/* CLKID_USB1 */
> @@ -236,7 +236,7 @@
> ?/* CLKID_USB0_DDR_BRIDGE */
> ?#define CLKID_MMC_PCLK ??66
> ?#define CLKID_DVIN ??67
> -#define CLKID_UART2 ??68
> +/* CLKID_UART2 */
> ?/* #define CLKID_SANA */
> ?#define CLKID_VPU_INTR ??70
> ?#define CLKID_SEC_AHB_AHB3_BRIDGE 71
> diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-
> bindings/clock/gxbb-clkc.h
> index 692846c7941b..7b329df47752 100644
> --- a/include/dt-bindings/clock/gxbb-clkc.h
> +++ b/include/dt-bindings/clock/gxbb-clkc.h
> @@ -15,13 +15,16 @@
> ?#define CLKID_SPI 34
> ?#define CLKID_I2C 22
> ?#define CLKID_SAR_ADC 23
> +#define CLKID_UART0 26
> ?#define CLKID_ETH 36
> +#define CLKID_UART1 48
> ?#define CLKID_USB0 50
> ?#define CLKID_USB1 51
> ?#define CLKID_USB 55
> ?#define CLKID_HDMI_PCLK 63
> ?#define CLKID_USB1_DDR_BRIDGE 64
> ?#define CLKID_USB0_DDR_BRIDGE 65
> +#define CLKID_UART2 68
> ?#define CLKID_SANA 69
> ?#define CLKID_GCLK_VENCI_INT0 77
> ?#define CLKID_AO_I2C 93
> --
> 2.11.0
>
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2017-03-28 15:51 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-28 9:25 [PATCH v2, 0/3] tty/serial: meson_uart: add support for core clock handling Helmut Klein
2017-03-28 9:25 ` [PATCH v2,1/3] meson_uart: expose CLKID_UARTx Helmut Klein
2017-03-28 15:51 ` Jerome Brunet [this message]
2017-03-28 18:18 ` Helmut Klein
2017-03-28 19:14 ` Jerome Brunet
2017-03-28 21:24 ` Martin Blumenstingl
2017-03-29 6:21 ` Jerome Brunet
2017-03-29 20:21 ` Kevin Hilman
2017-03-31 15:37 ` Jerome Brunet
2017-03-31 17:03 ` Helmut Klein
2017-03-28 9:25 ` [PATCH v2, 2/3] tty/serial: meson_uart: add documentation for the dt-bindings Helmut Klein
2017-03-28 10:05 ` Mark Rutland
2017-03-28 18:20 ` Helmut Klein
2017-03-28 9:25 ` [PATCH v2, 3/3] tty/serial: meson_uart: add the core clock handling to the driver Helmut Klein
2017-03-28 19:16 ` Jerome Brunet
2017-03-29 9:47 ` Helmut Klein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1490716277.20764.6.camel@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).