From mboxrd@z Thu Jan 1 00:00:00 1970 From: jagan@openedev.com (Jagan Teki) Date: Thu, 6 Apr 2017 23:32:13 +0530 Subject: [PATCH v3 7/9] ARM: dts: imx6dl-icore: Add touchscreen node In-Reply-To: <1491501735-1649-1-git-send-email-jagan@openedev.com> References: <1491501735-1649-1-git-send-email-jagan@openedev.com> Message-ID: <1491501735-1649-8-git-send-email-jagan@openedev.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Jagan Teki max11801 touchscreen on Engicam iCoreM6 DualLite/Solo module is connected via i2c1, so add max11801: touchscreen at 48 on i2c1. Cc: Shawn Guo Cc: Matteo Lisi Cc: Michael Trimarchi Signed-off-by: Jagan Teki --- Changes for v3,v2: - none arch/arm/boot/dts/imx6dl-icore.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts index ea9ab05..27f37cd 100644 --- a/arch/arm/boot/dts/imx6dl-icore.dts +++ b/arch/arm/boot/dts/imx6dl-icore.dts @@ -58,6 +58,15 @@ status = "okay"; }; +&i2c1 { + max11801: touchscreen at 48 { + compatible = "maxim,max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; +}; + &i2c3 { sgtl5000: codec at a { compatible = "fsl,sgtl5000"; -- 1.9.1