From: lipengcheng8@huawei.com (Li Pengcheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: dts: Add coresight DT nodes for hi6220-hikey
Date: Fri, 7 Apr 2017 16:06:58 +0800 [thread overview]
Message-ID: <1491552418-74386-1-git-send-email-lipengcheng8@huawei.com> (raw)
Add coresight DT nodes for hikey board.
Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com>
Signed-off-by: Li Zhong <lizhong11@hisilicon.com>
---
.../arm64/boot/dts/hisilicon/hi6220-coresight.dtsi | 318 +++++++++++++++++++++
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 +
2 files changed, 319 insertions(+)
create mode 100644 arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
new file mode 100644
index 0000000..a523e43
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
@@ -0,0 +1,318 @@
+/*
+ * Hisilicon Ltd. Hi6220 SoC
+ *
+ * Copyright (C) 2015-2016 Hisilicon Ltd.
+ * Author: lipengcheng <lipengcheng8@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/ {
+ amba {
+ /* A53 cluster0 internal coresight */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "arm,amba-bus";
+ ranges;
+ etm at 0,f659c000 {
+ compatible = "arm,coresight-etm4x","arm,primecell";
+ reg = <0 0xf659c000 0 0x1000>;
+
+ clocks = <&sys_ctrl HI6220_CS_ATB>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu0>;
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port0>;
+ };
+ };
+ };
+
+ etm at 1,f659d000 {
+ compatible = "arm,coresight-etm4x","arm,primecell";
+ reg = <0 0xf659d000 0 0x1000>;
+
+ clocks = <&sys_ctrl HI6220_CS_ATB>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu1>;
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port1>;
+ };
+ };
+
+ };
+
+ etm at 2,f659e000 {
+ compatible = "arm,coresight-etm4x","arm,primecell";
+ reg = <0 0xf659e000 0 0x1000>;
+
+ clocks = <&sys_ctrl HI6220_CS_ATB>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu2>;
+ port {
+ etm2_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port2>;
+ };
+ };
+ };
+
+ etm at 3,f659f000 {
+ compatible = "arm,coresight-etm4x","arm,primecell";
+ reg = <0 0xf659f000 0 0x1000>;
+
+ clocks = <&sys_ctrl HI6220_CS_ATB>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu3>;
+ port {
+ etm3_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port3>;
+ };
+ };
+ };
+
+ /* A53 cluster1 internal coresight */
+ etm at 4,f65dc000 {
+ compatible = "arm,coresight-etm4x","arm,primecell";
+ reg = <0 0xf65dc000 0 0x1000>;
+
+ clocks = <&sys_ctrl HI6220_CS_ATB>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu4>;
+ port {
+ etm4_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port4>;
+ };
+ };
+ };
+
+ etm at 5,f65dd000 {
+ compatible = "arm,coresight-etm4x","arm,primecell";
+ reg = <0 0xf65dd000 0 0x1000>;
+
+ clocks = <&sys_ctrl HI6220_CS_ATB>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu5>;
+ port {
+ etm5_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port5>;
+ };
+ };
+ };
+
+ etm at 6,f65de000 {
+ compatible = "arm,coresight-etm4x","arm,primecell";
+ reg = <0 0xf65de000 0 0x1000>;
+
+ clocks = <&sys_ctrl HI6220_CS_ATB>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu6>;
+ port {
+ etm6_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port6>;
+ };
+ };
+ };
+
+ etm at 7,f65df000 {
+ compatible = "arm,coresight-etm4x","arm,primecell";
+ reg = <0 0xf65df000 0 0x1000>;
+
+ clocks = <&sys_ctrl HI6220_CS_ATB>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu7>;
+ port {
+ etm7_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port7>;
+ };
+ };
+ };
+
+ funnel0:funnel at 0,f6501000 {
+ compatible = "arm,coresight-funnel","arm,primecell";
+ reg = <0 0xf6501000 0 0x1000>;
+
+ clocks = <&sys_ctrl HI6220_CS_ATB>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel output port */
+ port at 0 {
+ reg = <0>;
+ funnel0_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port>;
+ };
+ };
+
+ /* funnel input ports */
+ port at 1 {
+ reg = <0>;
+ funnel0_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out_port>;
+ };
+ };
+
+ port at 2 {
+ reg = <1>;
+ funnel0_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out_port>;
+ };
+ };
+
+ port at 3 {
+ reg = <2>;
+ funnel0_in_port2: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out_port>;
+ };
+ };
+
+ port at 4 {
+ reg = <3>;
+ funnel0_in_port3: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out_port>;
+ };
+ };
+
+ port at 5 {
+ reg = <4>;
+ funnel0_in_port4: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm4_out_port>;
+ };
+ };
+
+ port at 6 {
+ reg = <5>;
+ funnel0_in_port5: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm5_out_port>;
+ };
+ };
+
+ port at 7 {
+ reg = <6>;
+ funnel0_in_port6: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm6_out_port>;
+ };
+ };
+
+ port at 8 {
+ reg = <7>;
+ funnel0_in_port7: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm7_out_port>;
+ };
+ };
+ };
+ };
+
+ funnel1:funnel at 1,f6401000 {
+ compatible = "arm,coresight-funnel","arm,primecell";
+ reg = <0 0xf6401000 0 0x1000>;
+
+ clocks = <&sys_ctrl HI6220_CS_ATB>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* funnel1 output port */
+ port at 0 {
+ reg = <0>;
+ funnel1_out_port: endpoint {
+ remote-endpoint = <&etf_in_port>;
+ };
+ };
+
+ /* funnel1 input port */
+ port at 1 {
+ reg = <0>;
+ funnel1_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel0_out_port>;
+ };
+ };
+ };
+ };
+ etf:etf at 0,f6402000 {
+ compatible = "arm,coresight-tmc","arm,primecell";
+ reg = <0 0xf6402000 0 0x1000>;
+
+ clocks = <&sys_ctrl HI6220_CS_ATB>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* etf input port */
+ port at 0 {
+ reg = <0>;
+ etf_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel1_out_port>;
+ };
+ };
+ /* etf output port */
+ port at 1 {
+ reg = <0>;
+ etf_out_port: endpoint {
+ remote-endpoint = <&replicator0_in_port>;
+ };
+ };
+ };
+ };
+
+ replicator at 0{
+ compatible = "arm,coresight-replicator";
+
+ clocks = <&sys_ctrl HI6220_CS_ATB>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* replicator input port */
+ port at 0 {
+ reg = <0>;
+ replicator0_in_port: endpoint{
+ slave-mode;
+ remote-endpoint = <&etf_out_port>;
+ };
+ };
+ /* replicator out port */
+ port at 1 {
+ reg = <0>;
+ replicator0_out_port: endpoint {
+ remote-endpoint = <&etr0_in_port>;
+ };
+ };
+ };
+ };
+
+ etr at 0,f6404000 {
+ compatible = "arm,coresight-tmc","arm,primecell";
+ reg = <0 0xf6404000 0 0x1000>;
+
+ coresight-default-sink;
+ clocks = <&sys_ctrl HI6220_CS_ATB>;
+ clock-names = "apb_pclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* etr input port */
+ port at 0 {
+ etr0_in_port: endpoint{
+ slave-mode;
+ remote-endpoint = <&replicator0_out_port>;
+ };
+ };
+ };
+ };
+ };
+};
+
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index dba3c13..fb70c9b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "hi6220.dtsi"
#include "hikey-pinctrl.dtsi"
+#include "hi6220-coresight.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
--
2.1.0
next reply other threads:[~2017-04-07 8:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-07 8:06 Li Pengcheng [this message]
2017-04-07 9:38 ` [PATCH] arm64: dts: Add coresight DT nodes for hi6220-hikey Leo Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491552418-74386-1-git-send-email-lipengcheng8@huawei.com \
--to=lipengcheng8@huawei.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox