From mboxrd@z Thu Jan 1 00:00:00 1970 From: tharvey@gateworks.com (Tim Harvey) Date: Mon, 10 Apr 2017 13:58:10 -0700 Subject: [PATCH v2] ARM: dts: imx: ventana: fix DTC warnings In-Reply-To: <1491252168-7934-1-git-send-email-tharvey@gateworks.com> References: <1491252168-7934-1-git-send-email-tharvey@gateworks.com> Message-ID: <1491857890-10554-1-git-send-email-tharvey@gateworks.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Remove the sky2 ethernet device node from the pcie controller which was invalid to begin with. The original intent was to allow the bootloader to populate the MAC via dt but this requires the PCI bus topology to be complete in dt as well and as these boards have an expansion connector that topology is dynamic and can't be represented here. Signed-off-by: Tim Harvey --- v2: - remove eth1 aliases Signed-off-by: Tim Harvey --- arch/arm/boot/dts/imx6q-gw5400-a.dts | 5 ----- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 5 ----- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 5 ----- 3 files changed, 15 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 8e84713..687ab91 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -19,7 +19,6 @@ /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; @@ -347,10 +346,6 @@ &pcie { reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2 at 8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &ssi1 { diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index a208e7e..5bc6ed1 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -14,7 +14,6 @@ / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; @@ -342,10 +341,6 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2 at 8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &pwm2 { diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 968fda9..66fcf838 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -14,7 +14,6 @@ / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; @@ -379,10 +378,6 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2 at 8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &pwm1 { -- 2.7.4