Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: hugues.fruchet@st.com (Hugues Fruchet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 3/8] ARM: dts: stm32: Enable DCMI support on STM32F429 MCU
Date: Thu, 20 Apr 2017 18:07:20 +0200	[thread overview]
Message-ID: <1492704445-22186-4-git-send-email-hugues.fruchet@st.com> (raw)
In-Reply-To: <1492704445-22186-1-git-send-email-hugues.fruchet@st.com>

Enable DCMI camera interface on STM32F429 MCU.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index ee0da97..e1ff978 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -736,6 +736,29 @@
 					slew-rate = <3>;
 				};
 			};
+
+			dcmi_pins: dcmi_pins at 0 {
+				pins {
+					pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
+						 <STM32F429_PB7_FUNC_DCMI_VSYNC>,
+						 <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
+						 <STM32F429_PC6_FUNC_DCMI_D0>,
+						 <STM32F429_PC7_FUNC_DCMI_D1>,
+						 <STM32F429_PC8_FUNC_DCMI_D2>,
+						 <STM32F429_PC9_FUNC_DCMI_D3>,
+						 <STM32F429_PC11_FUNC_DCMI_D4>,
+						 <STM32F429_PD3_FUNC_DCMI_D5>,
+						 <STM32F429_PB8_FUNC_DCMI_D6>,
+						 <STM32F429_PE6_FUNC_DCMI_D7>,
+						 <STM32F429_PC10_FUNC_DCMI_D8>,
+						 <STM32F429_PC12_FUNC_DCMI_D9>,
+						 <STM32F429_PD6_FUNC_DCMI_D10>,
+						 <STM32F429_PD2_FUNC_DCMI_D11>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <3>;
+				};
+			};
 		};
 
 		rcc: rcc at 40023810 {
@@ -805,6 +828,20 @@
 			status = "disabled";
 		};
 
+		dcmi: dcmi at 50050000 {
+			compatible = "st,stm32-dcmi";
+			reg = <0x50050000 0x400>;
+			interrupts = <78>;
+			resets = <&rcc STM32F4_AHB2_RESET(DCMI)>;
+			clocks = <&rcc 0 STM32F4_AHB2_CLOCK(DCMI)>;
+			clock-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dcmi_pins>;
+			dmas = <&dma2 1 1 0x414 0x3>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
 		rng: rng at 50060800 {
 			compatible = "st,stm32-rng";
 			reg = <0x50060800 0x400>;
-- 
1.9.1

  parent reply	other threads:[~2017-04-20 16:07 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-20 16:07 [PATCH v4 0/8] Add support for DCMI camera interface of STMicroelectronics STM32 SoC series Hugues Fruchet
2017-04-20 16:07 ` [PATCH v4 1/8] dt-bindings: Document STM32 DCMI bindings Hugues Fruchet
2017-04-20 16:07 ` [PATCH v4 2/8] [media] stm32-dcmi: STM32 DCMI camera interface driver Hugues Fruchet
2017-05-05 10:54   ` Hans Verkuil
2017-04-20 16:07 ` Hugues Fruchet [this message]
2017-04-20 16:07 ` [PATCH v4 4/8] ARM: dts: stm32: Enable DCMI camera interface on STM32F429-EVAL board Hugues Fruchet
2017-04-20 16:07 ` [PATCH v4 5/8] ARM: dts: stm32: Enable STMPE1600 gpio expander of " Hugues Fruchet
2017-04-20 16:07 ` [PATCH v4 6/8] ARM: dts: stm32: Enable OV2640 camera support " Hugues Fruchet
2017-04-20 16:07 ` [PATCH v4 7/8] ARM: configs: stm32: STMPE1600 GPIO expander Hugues Fruchet
2017-04-20 16:07 ` [PATCH v4 8/8] ARM: configs: stm32: DCMI + OV2640 camera support Hugues Fruchet
2017-05-04  7:35 ` [PATCH v4 0/8] Add support for DCMI camera interface of STMicroelectronics STM32 SoC series Alexandre Torgue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1492704445-22186-4-git-send-email-hugues.fruchet@st.com \
    --to=hugues.fruchet@st.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox