From mboxrd@z Thu Jan 1 00:00:00 1970 From: hoegeun.kwon@samsung.com (Hoegeun Kwon) Date: Tue, 25 Apr 2017 10:54:21 +0900 Subject: [PATCH] arm64: dts: exynos: Remove the te-gpios property in the TM2 boards References: Message-ID: <1493085261-3488-1-git-send-email-hoegeun.kwon@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The decon uses HW-TRIGGER, so TE interrupt is not necessary. Therefore, remove the te-gpios property in the TM2 dts. Signed-off-by: Hoegeun Kwon --- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index 3ff9527..23191eb 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -60,7 +60,6 @@ vci-supply = <&ldo28_reg>; reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; - te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; }; }; -- 1.9.1