From: yangbo.lu@nxp.com (Yangbo Lu)
To: linux-arm-kernel@lists.infradead.org
Subject: [v2, 5/5] arm64: dts: ls1088a: add esdhc node
Date: Thu, 4 May 2017 18:49:00 +0800 [thread overview]
Message-ID: <1493894940-47452-6-git-send-email-yangbo.lu@nxp.com> (raw)
In-Reply-To: <1493894940-47452-1-git-send-email-yangbo.lu@nxp.com>
Add esdhc node for ls1088a and enable it on both RDB and QDS boards.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v2:
- Sorted the node.
---
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 4 ++++
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 4 ++++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 12 ++++++++++++
3 files changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 8c3cae5..ff21055 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -118,6 +118,10 @@
status = "okay";
};
+&esdhc {
+ status = "okay";
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 8a04fbb..ab62ef6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -102,6 +102,10 @@
status = "okay";
};
+&esdhc {
+ status = "okay";
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 2946fd7..10b5775 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -263,6 +263,18 @@
status = "disabled";
};
+ esdhc: esdhc at 2140000 {
+ compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
+ reg = <0x0 0x2140000 0x0 0x10000>;
+ interrupts = <0 28 0x4>; /* Level high type */
+ clock-frequency = <0>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ little-endian;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
sata: sata at 3200000 {
compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>;
--
2.1.0.27.g96db324
prev parent reply other threads:[~2017-05-04 10:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-04 10:48 [v2, 0/5] Add eSDHC UHS-I/HS200 mode support for ls1012a/ls1046a/ls208xa Yangbo Lu
2017-05-04 10:48 ` [v2, 1/5] mmc: dt: add compatible into eSDHC required properties Yangbo Lu
2017-05-05 2:36 ` Shawn Guo
2017-05-05 3:01 ` Y.B. Lu
2017-05-05 3:18 ` Shawn Guo
2017-05-08 16:36 ` Rob Herring
2017-05-09 2:51 ` Y.B. Lu
2017-05-04 10:48 ` [v2, 2/5] arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDB Yangbo Lu
2017-05-04 10:48 ` [v2, 3/5] arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS Yangbo Lu
2017-05-04 10:48 ` [v2, 4/5] arm64: dts: ls1012a: add eSDHC nodes Yangbo Lu
2017-05-04 10:49 ` Yangbo Lu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1493894940-47452-6-git-send-email-yangbo.lu@nxp.com \
--to=yangbo.lu@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).