From: eric.auger@redhat.com (Eric Auger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 22/24] KVM: arm64: vgic-its: ITT save and restore
Date: Thu, 4 May 2017 13:44:42 +0200 [thread overview]
Message-ID: <1493898284-29504-23-git-send-email-eric.auger@redhat.com> (raw)
In-Reply-To: <1493898284-29504-1-git-send-email-eric.auger@redhat.com>
Implement routines to save and restore device ITT and their
interrupt table entries (ITE).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
v5 -> v6:
- accomodate vgic_its_alloc_ite change of proto
- check LPI ID on restore, check eventid offset
- initializations on separate line
- coming after device save/restore
- add_lpi does config and pending bit sync
v4 -> v5:
- ITE are now sorted by eventid on the flush
- rename *flush* into *save*
- use macros for shits and masks
- pass ite_esz to vgic_its_save_ite
v3 -> v4:
- lookup_table and compute_next_eventid_offset become static in this
patch
- remove static along with vgic_its_flush/restore_itt to avoid
compilation warnings
- next field only computed with a shift (mask removed)
- handle the case where the last element has not been found
v2 -> v3:
- add return 0 in vgic_its_restore_ite (was in subsequent patch)
v2: creation
---
virt/kvm/arm/vgic/vgic-its.c | 116 +++++++++++++++++++++++++++++++++++++++++--
virt/kvm/arm/vgic/vgic.h | 4 ++
2 files changed, 117 insertions(+), 3 deletions(-)
diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c
index c5b388d..376d963 100644
--- a/virt/kvm/arm/vgic/vgic-its.c
+++ b/virt/kvm/arm/vgic/vgic-its.c
@@ -1716,7 +1716,7 @@ static u32 compute_next_devid_offset(struct list_head *h,
return min_t(u32, next_offset, VITS_DTE_MAX_DEVID_OFFSET);
}
-u32 compute_next_eventid_offset(struct list_head *h, struct its_ite *ite)
+static u32 compute_next_eventid_offset(struct list_head *h, struct its_ite *ite)
{
struct its_ite *next;
u32 next_offset;
@@ -1793,14 +1793,124 @@ static int scan_its_table(struct vgic_its *its, gpa_t base, int size, int esz,
return ret;
}
+/**
+ * vgic_its_save_ite - Save an interrupt translation entry at @gpa
+ */
+static int vgic_its_save_ite(struct vgic_its *its, struct its_device *dev,
+ struct its_ite *ite, gpa_t gpa, int ite_esz)
+{
+ struct kvm *kvm = its->dev->kvm;
+ u32 next_offset;
+ u64 val;
+
+ next_offset = compute_next_eventid_offset(&dev->itt_head, ite);
+ val = ((u64)next_offset << KVM_ITS_ITE_NEXT_SHIFT) |
+ ((u64)ite->lpi << KVM_ITS_ITE_PINTID_SHIFT) |
+ ite->collection->collection_id;
+ val = cpu_to_le64(val);
+ return kvm_write_guest(kvm, gpa, &val, ite_esz);
+}
+
+/**
+ * vgic_its_restore_ite - restore an interrupt translation entry
+ * @event_id: id used for indexing
+ * @ptr: pointer to the ITE entry
+ * @opaque: pointer to the its_device
+ */
+static int vgic_its_restore_ite(struct vgic_its *its, u32 event_id,
+ void *ptr, void *opaque)
+{
+ struct its_device *dev = (struct its_device *)opaque;
+ struct its_collection *collection;
+ struct kvm *kvm = its->dev->kvm;
+ struct kvm_vcpu *vcpu = NULL;
+ u64 val;
+ u64 *p = (u64 *)ptr;
+ struct vgic_irq *irq;
+ u32 coll_id, lpi_id;
+ struct its_ite *ite;
+ u32 offset;
+
+ val = *p;
+
+ val = le64_to_cpu(val);
+
+ coll_id = val & KVM_ITS_ITE_ICID_MASK;
+ lpi_id = (val & KVM_ITS_ITE_PINTID_MASK) >> KVM_ITS_ITE_PINTID_SHIFT;
+
+ if (!lpi_id)
+ return 1; /* invalid entry, no choice but to scan next entry */
+
+ if (lpi_id < VGIC_MIN_LPI)
+ return -EINVAL;
+
+ offset = val >> KVM_ITS_ITE_NEXT_SHIFT;
+ if (event_id + offset >= BIT_ULL(dev->num_eventid_bits))
+ return -EINVAL;
+
+ collection = find_collection(its, coll_id);
+ if (!collection)
+ return -EINVAL;
+
+ ite = vgic_its_alloc_ite(dev, collection, lpi_id, event_id);
+ if (IS_ERR(ite))
+ return PTR_ERR(ite);
+
+ if (its_is_collection_mapped(collection))
+ vcpu = kvm_get_vcpu(kvm, collection->target_addr);
+
+ irq = vgic_add_lpi(kvm, lpi_id, vcpu);
+ if (IS_ERR(irq))
+ return PTR_ERR(irq);
+ ite->irq = irq;
+
+ return offset;
+}
+
+static int vgic_its_ite_cmp(void *priv, struct list_head *a,
+ struct list_head *b)
+{
+ struct its_ite *itea = container_of(a, struct its_ite, ite_list);
+ struct its_ite *iteb = container_of(b, struct its_ite, ite_list);
+
+ if (itea->event_id < iteb->event_id)
+ return -1;
+ else
+ return 1;
+}
+
static int vgic_its_save_itt(struct vgic_its *its, struct its_device *device)
{
- return -ENXIO;
+ const struct vgic_its_abi *abi = vgic_its_get_abi(its);
+ gpa_t base = device->itt_addr;
+ struct its_ite *ite;
+ int ret;
+ int ite_esz = abi->ite_esz;
+
+ list_sort(NULL, &device->itt_head, vgic_its_ite_cmp);
+
+ list_for_each_entry(ite, &device->itt_head, ite_list) {
+ gpa_t gpa = base + ite->event_id * ite_esz;
+
+ ret = vgic_its_save_ite(its, device, ite, gpa, ite_esz);
+ if (ret)
+ return ret;
+ }
+ return 0;
}
static int vgic_its_restore_itt(struct vgic_its *its, struct its_device *dev)
{
- return -ENXIO;
+ const struct vgic_its_abi *abi = vgic_its_get_abi(its);
+ gpa_t base = dev->itt_addr;
+ int ret;
+ int ite_esz = abi->ite_esz;
+ size_t max_size = BIT_ULL(dev->num_eventid_bits) * ite_esz;
+
+ ret = scan_its_table(its, base, max_size, ite_esz, 0,
+ vgic_its_restore_ite, dev);
+
+ return ret;
}
/**
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index e896114..92a8ca0 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -81,6 +81,10 @@
#define KVM_ITS_CTE_VALID_MASK BIT_ULL(63)
#define KVM_ITS_CTE_RDBASE_SHIFT 16
#define KVM_ITS_CTE_ICID_MASK GENMASK_ULL(15, 0)
+#define KVM_ITS_ITE_NEXT_SHIFT 48
+#define KVM_ITS_ITE_PINTID_SHIFT 16
+#define KVM_ITS_ITE_PINTID_MASK GENMASK_ULL(47, 16)
+#define KVM_ITS_ITE_ICID_MASK GENMASK_ULL(15, 0)
#define KVM_ITS_DTE_VALID_SHIFT 63
#define KVM_ITS_DTE_VALID_MASK BIT_ULL(63)
#define KVM_ITS_DTE_NEXT_SHIFT 49
--
2.5.5
next prev parent reply other threads:[~2017-05-04 11:44 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-04 11:44 [PATCH v6 00/24] vITS save/restore Eric Auger
2017-05-04 11:44 ` [PATCH v6 01/24] KVM: arm/arm64: Add ITS save/restore API documentation Eric Auger
2017-05-04 13:23 ` Christoffer Dall
2017-05-04 14:50 ` Auger Eric
2017-05-04 16:52 ` Christoffer Dall
2017-05-04 11:44 ` [PATCH v6 02/24] KVM: arm/arm64: Add GICV3 pending table save " Eric Auger
2017-05-04 13:24 ` Christoffer Dall
2017-05-04 11:44 ` [PATCH v6 03/24] KVM: arm/arm64: vgic-its: rename itte into ite Eric Auger
2017-05-04 11:44 ` [PATCH v6 04/24] arm/arm64: vgic: turn vgic_find_mmio_region into public Eric Auger
2017-05-04 11:44 ` [PATCH v6 05/24] KVM: arm64: vgic-its: KVM_DEV_ARM_VGIC_GRP_ITS_REGS group Eric Auger
2017-05-04 11:44 ` [PATCH v6 06/24] KVM: arm/arm64: vgic: expose (un)lock_all_vcpus Eric Auger
2017-05-04 11:44 ` [PATCH v6 07/24] KVM: arm64: vgic-its: Implement vgic_its_has_attr_regs and attr_regs_access Eric Auger
2017-05-04 14:04 ` Marc Zyngier
2017-05-04 15:03 ` Auger Eric
2017-05-04 16:48 ` Christoffer Dall
2017-05-04 11:44 ` [PATCH v6 08/24] KVM: arm64: vgic-its: Implement vgic_mmio_uaccess_write_its_creadr Eric Auger
2017-05-04 14:16 ` Marc Zyngier
2017-05-04 15:09 ` Auger Eric
2017-05-04 17:09 ` Christoffer Dall
2017-05-05 8:06 ` Auger Eric
2017-05-04 11:44 ` [PATCH v6 09/24] KVM: arm64: vgic-its: Introduce migration ABI infrastructure Eric Auger
2017-05-04 14:45 ` Marc Zyngier
2017-05-04 17:13 ` Christoffer Dall
2017-05-05 8:16 ` Auger Eric
2017-05-05 9:43 ` Christoffer Dall
2017-05-04 11:44 ` [PATCH v6 10/24] KVM: arm64: vgic-its: Implement vgic_mmio_uaccess_write_its_iidr Eric Auger
2017-05-04 15:39 ` Marc Zyngier
2017-05-04 17:14 ` Christoffer Dall
2017-05-04 11:44 ` [PATCH v6 11/24] KVM: arm64: vgic-its: Interpret MAPD Size field and check related errors Eric Auger
2017-05-05 9:44 ` Marc Zyngier
2017-05-04 11:44 ` [PATCH v6 12/24] KVM: arm64: vgic-its: Interpret MAPD ITT_addr field Eric Auger
2017-05-04 17:16 ` Christoffer Dall
2017-05-05 9:45 ` Marc Zyngier
2017-05-04 11:44 ` [PATCH v6 13/24] KVM: arm64: vgic-its: Check the device id matches TYPER DEVBITS range Eric Auger
2017-05-04 17:19 ` Christoffer Dall
2017-05-04 17:23 ` Marc Zyngier
2017-05-04 11:44 ` [PATCH v6 14/24] KVM: arm64: vgic-v3: vgic_v3_lpi_sync_pending_status Eric Auger
2017-05-05 8:11 ` Christoffer Dall
2017-05-05 9:45 ` Auger Eric
2017-05-05 9:59 ` Marc Zyngier
2017-05-05 10:10 ` Christoffer Dall
2017-05-05 10:35 ` Marc Zyngier
2017-05-05 14:20 ` Auger Eric
2017-05-05 14:50 ` Christoffer Dall
2017-05-04 11:44 ` [PATCH v6 15/24] KVM: arm64: vgic-its: Read config and pending bit in add_lpi() Eric Auger
2017-05-05 9:57 ` Christoffer Dall
2017-05-05 12:50 ` Marc Zyngier
2017-05-05 14:50 ` Auger Eric
2017-05-05 18:07 ` Christoffer Dall
2017-05-04 11:44 ` [PATCH v6 16/24] KVM: arm64: vgic-its: KVM_DEV_ARM_ITS_SAVE/RESTORE_TABLES Eric Auger
2017-05-05 11:55 ` Christoffer Dall
2017-05-04 11:44 ` [PATCH v6 17/24] KVM: arm64: vgic-its: vgic_its_alloc_ite/device Eric Auger
2017-05-05 12:04 ` Christoffer Dall
2017-05-04 11:44 ` [PATCH v6 18/24] KVM: arm64: vgic-its: Add infrastructure for table lookup Eric Auger
2017-05-05 12:16 ` Christoffer Dall
2017-05-04 11:44 ` [PATCH v6 19/24] KVM: arm64: vgic-its: Collection table save/restore Eric Auger
2017-05-05 12:28 ` Christoffer Dall
2017-05-05 14:28 ` Auger Eric
2017-05-05 14:43 ` Auger Eric
2017-05-04 11:44 ` [PATCH v6 20/24] KVM: arm64: vgic-its: vgic_its_check_id returns the entry's GPA Eric Auger
2017-05-04 11:44 ` [PATCH v6 21/24] KVM: arm64: vgic-its: Device table save/restore Eric Auger
2017-05-05 12:44 ` Christoffer Dall
2017-05-05 16:23 ` Auger Eric
2017-05-05 18:12 ` Christoffer Dall
2017-05-06 10:21 ` Auger Eric
2017-05-04 11:44 ` Eric Auger [this message]
2017-05-05 14:50 ` [PATCH v6 22/24] KVM: arm64: vgic-its: ITT save and restore Christoffer Dall
2017-05-04 11:44 ` [PATCH v6 23/24] KVM: arm64: vgic-its: Fix pending table sync Eric Auger
2017-05-05 14:54 ` Christoffer Dall
2017-05-04 11:44 ` [PATCH v6 24/24] KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES Eric Auger
2017-05-05 9:24 ` Auger Eric
2017-05-05 14:56 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1493898284-29504-23-git-send-email-eric.auger@redhat.com \
--to=eric.auger@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).