From mboxrd@z Thu Jan 1 00:00:00 1970 From: ulf.hansson@linaro.org (Ulf Hansson) Date: Mon, 8 May 2017 18:21:12 +0200 Subject: [PATCH 3/8] mfd: dts: hi655x: Add clock binding for the pmic In-Reply-To: <1494260477-25163-1-git-send-email-ulf.hansson@linaro.org> References: <1494260477-25163-1-git-send-email-ulf.hansson@linaro.org> Message-ID: <1494260477-25163-4-git-send-email-ulf.hansson@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Daniel Lezcano The hi655x PMIC provides the regulators but also a clock. The latter is missing in the definition, so extend the documentation to include this as well. Signed-off-by: Daniel Lezcano Acked-by: Rob Herring Acked-by: Lee Jones [Ulf: Split patch and updated changelog] Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt index 0548569..9630ac0 100644 --- a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt @@ -16,6 +16,11 @@ Required properties: - reg: Base address of PMIC on Hi6220 SoC. - interrupt-controller: Hi655x has internal IRQs (has own IRQ domain). - pmic-gpios: The GPIO used by PMIC IRQ. +- #clock-cells: From common clock binding; shall be set to 0 + +Optional properties: +- clock-output-names: From common clock binding to override the + default output clock name Example: pmic: pmic at f8000000 { @@ -24,4 +29,5 @@ Example: interrupt-controller; #interrupt-cells = <2>; pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + #clock-cells = <0>; } -- 2.7.4