From mboxrd@z Thu Jan 1 00:00:00 1970 From: ulf.hansson@linaro.org (Ulf Hansson) Date: Mon, 8 May 2017 18:21:14 +0200 Subject: [PATCH 5/8] arm64: dts: hi6220: Move the fixed_5v_hub regulator to the hikey dts In-Reply-To: <1494260477-25163-1-git-send-email-ulf.hansson@linaro.org> References: <1494260477-25163-1-git-send-email-ulf.hansson@linaro.org> Message-ID: <1494260477-25163-6-git-send-email-ulf.hansson@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The regulator is a part of the hikey board, therefore let's move it from the hi6220 SoC dtsi file into the hikey dts file . Let's also rename the regulator according to the datasheet (5V_HUB) to better reflect the HW. Signed-off-by: Ulf Hansson Acked-by: Daniel Lezcano --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 10 ++++++++++ arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 12 +----------- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index e0496f7..8070c75 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -81,6 +81,16 @@ }; }; + reg_5v_hub: regulator at 0 { + compatible = "regulator-fixed"; + regulator-name = "5V_HUB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio0 7 0>; + regulator-always-on; + }; + soc { spi0: spi at f7106000 { status = "ok"; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 1e5129b..951152d 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -725,20 +725,10 @@ status = "disabled"; }; - fixed_5v_hub: regulator at 0 { - compatible = "regulator-fixed"; - regulator-name = "fixed_5v_hub"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - gpio = <&gpio0 7 0>; - regulator-always-on; - }; - usb_phy: usbphy { compatible = "hisilicon,hi6220-usb-phy"; #phy-cells = <0>; - phy-supply = <&fixed_5v_hub>; + phy-supply = <®_5v_hub>; hisilicon,peripheral-syscon = <&sys_ctrl>; }; -- 2.7.4