* [PATCH v2 01/11] dt-bindings: bcm: Add Broadcom Stingray bindings document
2017-05-15 12:02 [PATCH v2 00/11] Broadcom Stingray SOC Initial Support Anup Patel
@ 2017-05-15 12:02 ` Anup Patel
2017-05-15 12:02 ` [PATCH v2 02/11] dt-bindings: clk: Extend binding doc for Stingray SOC Anup Patel
` (9 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Anup Patel @ 2017-05-15 12:02 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds DT bindings info for Broadcom Stingray SOC
and related reference boards.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt | 12 ++++++++++++
1 file changed, 12 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
new file mode 100644
index 0000000..23a0217
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
@@ -0,0 +1,12 @@
+Broadcom Stingray device tree bindings
+------------------------------------------------
+
+Boards with Stingray shall have the following properties:
+
+Required root node property:
+
+Stingray Combo SVK board
+compatible = "brcm,bcm958742k", "brcm,stingray";
+
+Stingray SST100 board
+compatible = "brcm,bcm958742t", "brcm,stingray";
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 02/11] dt-bindings: clk: Extend binding doc for Stingray SOC
2017-05-15 12:02 [PATCH v2 00/11] Broadcom Stingray SOC Initial Support Anup Patel
2017-05-15 12:02 ` [PATCH v2 01/11] dt-bindings: bcm: Add Broadcom Stingray bindings document Anup Patel
@ 2017-05-15 12:02 ` Anup Patel
2017-05-15 12:02 ` [PATCH v2 03/11] clk: bcm: Add clocks " Anup Patel
` (8 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Anup Patel @ 2017-05-15 12:02 UTC (permalink / raw)
To: linux-arm-kernel
From: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Update iproc clock dt-binding documentation with
Stingray pll and clock details.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../bindings/clock/brcm,iproc-clocks.txt | 76 ++++++++++++++++
include/dt-bindings/clock/bcm-sr.h | 101 +++++++++++++++++++++
2 files changed, 177 insertions(+)
create mode 100644 include/dt-bindings/clock/bcm-sr.h
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
index 6f66e9a..f2c5f0e4a 100644
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -219,3 +219,79 @@ BCM63138
--------
PLL and leaf clock compatible strings for BCM63138 are:
"brcm,bcm63138-armpll"
+
+Stingray
+-----------
+PLL and leaf clock compatible strings for Stingray are:
+ "brcm,sr-genpll0"
+ "brcm,sr-genpll1"
+ "brcm,sr-genpll2"
+ "brcm,sr-genpll3"
+ "brcm,sr-genpll4"
+ "brcm,sr-genpll5"
+ "brcm,sr-genpll6"
+
+ "brcm,sr-lcpll0"
+ "brcm,sr-lcpll1"
+ "brcm,sr-lcpll-pcie"
+
+
+The following table defines the set of PLL/clock index and ID for Stingray.
+These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-sr.h"
+
+ Clock Source Index ID
+ --- ----- ----- ---------
+ crystal N/A N/A N/A
+ crmu_ref25m crystal N/A N/A
+
+ genpll0 crystal 0 BCM_SR_GENPLL0
+ clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK
+ clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK
+ clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK
+ clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK
+ clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
+ clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK
+
+ genpll1 crystal 0 BCM_SR_GENPLL1
+ clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK
+ clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK
+
+ genpll2 crystal 0 BCM_SR_GENPLL2
+ clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK
+ clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK
+ clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK
+ clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK
+ clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH
+
+ genpll3 crystal 0 BCM_SR_GENPLL3
+ clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK
+ clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK
+
+ genpll4 crystal 0 BCM_SR_GENPLL4
+ ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK
+ clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK
+ noc_clk genpll4 3 BCM_SR_GENPLL4_NOC_CLK
+ clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK
+ clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
+
+
+ genpll5 crystal 0 BCM_SR_GENPLL5
+ fs4_hf_clk genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK
+ crypto_ae_clk genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK
+ raid_ae_clk genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK
+
+ genpll6 crystal 0 BCM_SR_GENPLL6
+ 48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK
+
+ lcpll0 crystal 0 BCM_SR_LCPLL0
+ clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK
+ clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK
+ clk_usb_ref lcpll0 3 BCM_SR_LCPLL0_USB_REF_CLK
+ sata_refpn lcpll0 3 BCM_SR_LCPLL0_SATA_REFPN_CLK
+
+ lcpll1 crystal 0 BCM_SR_LCPLL1
+ wan lcpll1 1 BCM_SR_LCPLL0_WAN_CLK
+
+ lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE
+ pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK
diff --git a/include/dt-bindings/clock/bcm-sr.h b/include/dt-bindings/clock/bcm-sr.h
new file mode 100644
index 0000000..cff6c6f
--- /dev/null
+++ b/include/dt-bindings/clock/bcm-sr.h
@@ -0,0 +1,101 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _CLOCK_BCM_SR_H
+#define _CLOCK_BCM_SR_H
+
+/* GENPLL 0 clock channel ID SCR HSLS FS PCIE */
+#define BCM_SR_GENPLL0 0
+#define BCM_SR_GENPLL0_SATA_CLK 1
+#define BCM_SR_GENPLL0_SCR_CLK 2
+#define BCM_SR_GENPLL0_250M_CLK 3
+#define BCM_SR_GENPLL0_PCIE_AXI_CLK 4
+#define BCM_SR_GENPLL0_PAXC_AXI_X2_CLK 5
+#define BCM_SR_GENPLL0_PAXC_AXI_CLK 6
+
+/* GENPLL 1 clock channel ID MHB PCIE NITRO */
+#define BCM_SR_GENPLL1 0
+#define BCM_SR_GENPLL1_PCIE_TL_CLK 1
+#define BCM_SR_GENPLL1_MHB_APB_CLK 2
+
+/* GENPLL 2 clock channel ID NITRO MHB*/
+#define BCM_SR_GENPLL2 0
+#define BCM_SR_GENPLL2_NIC_CLK 1
+#define BCM_SR_GENPLL2_250_NITRO_CLK 2
+#define BCM_SR_GENPLL2_125_NITRO_CLK 3
+#define BCM_SR_GENPLL2_CHIMP_CLK 4
+
+/* GENPLL 3 HSLS clock channel ID */
+#define BCM_SR_GENPLL3 0
+#define BCM_SR_GENPLL3_HSLS_CLK 1
+#define BCM_SR_GENPLL3_SDIO_CLK 2
+
+/* GENPLL 4 SCR clock channel ID */
+#define BCM_SR_GENPLL4 0
+#define BCM_SR_GENPLL4_CCN_CLK 1
+
+/* GENPLL 5 FS4 clock channel ID */
+#define BCM_SR_GENPLL5 0
+#define BCM_SR_GENPLL5_FS_CLK 1
+#define BCM_SR_GENPLL5_SPU_CLK 2
+
+/* GENPLL 6 NITRO clock channel ID */
+#define BCM_SR_GENPLL6 0
+#define BCM_SR_GENPLL6_48_USB_CLK 1
+
+/* LCPLL0 clock channel ID */
+#define BCM_SR_LCPLL0 0
+#define BCM_SR_LCPLL0_SATA_REF_CLK 1
+#define BCM_SR_LCPLL0_USB_REF_CLK 2
+#define BCM_SR_LCPLL0_SATA_REFPN_CLK 3
+
+/* LCPLL1 clock channel ID */
+#define BCM_SR_LCPLL1 0
+#define BCM_SR_LCPLL1_WAN_CLK 1
+
+/* LCPLL PCIE clock channel ID */
+#define BCM_SR_LCPLL_PCIE 0
+#define BCM_SR_LCPLL_PCIE_PHY_REF_CLK 1
+
+/* GENPLL EMEM0 clock channel ID */
+#define BCM_SR_EMEMPLL0 0
+#define BCM_SR_EMEMPLL0_EMEM_CLK 1
+
+/* GENPLL EMEM0 clock channel ID */
+#define BCM_SR_EMEMPLL1 0
+#define BCM_SR_EMEMPLL1_EMEM_CLK 1
+
+/* GENPLL EMEM0 clock channel ID */
+#define BCM_SR_EMEMPLL2 0
+#define BCM_SR_EMEMPLL2_EMEM_CLK 1
+
+#endif /* _CLOCK_BCM_SR_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 03/11] clk: bcm: Add clocks for Stingray SOC
2017-05-15 12:02 [PATCH v2 00/11] Broadcom Stingray SOC Initial Support Anup Patel
2017-05-15 12:02 ` [PATCH v2 01/11] dt-bindings: bcm: Add Broadcom Stingray bindings document Anup Patel
2017-05-15 12:02 ` [PATCH v2 02/11] dt-bindings: clk: Extend binding doc for Stingray SOC Anup Patel
@ 2017-05-15 12:02 ` Anup Patel
2017-05-15 12:02 ` [PATCH v2 04/11] arm64: dts: Initial DTS files for Broadcom " Anup Patel
` (7 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Anup Patel @ 2017-05-15 12:02 UTC (permalink / raw)
To: linux-arm-kernel
From: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
This patch adds support for Stingray clocks in iproc
ccf. The Stingray SOC has various plls based on iproc
pll architecture.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
drivers/clk/bcm/Kconfig | 8 ++
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-sr.c | 300 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 309 insertions(+)
create mode 100644 drivers/clk/bcm/clk-sr.c
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index b5ae531..1d9187d 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -46,3 +46,11 @@ config CLK_BCM_NS2
default ARCH_BCM_IPROC
help
Enable common clock framework support for the Broadcom Northstar 2 SoC
+
+config CLK_BCM_SR
+ bool "Broadcom Stingray clock support"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ select COMMON_CLK_IPROC
+ default ARCH_BCM_IPROC
+ help
+ Enable common clock framework support for the Broadcom Stingray SoC
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index d9dc848..a0c14fa 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o
obj-$(CONFIG_CLK_BCM_CYGNUS) += clk-cygnus.o
obj-$(CONFIG_CLK_BCM_NSP) += clk-nsp.o
obj-$(CONFIG_CLK_BCM_NS2) += clk-ns2.o
+obj-$(CONFIG_CLK_BCM_SR) += clk-sr.o
diff --git a/drivers/clk/bcm/clk-sr.c b/drivers/clk/bcm/clk-sr.c
new file mode 100644
index 0000000..0ef08cf
--- /dev/null
+++ b/drivers/clk/bcm/clk-sr.c
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/bcm-sr.h>
+#include "clk-iproc.h"
+
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+ .pwr_shift = ps, .iso_shift = is }
+
+#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
+
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+ .p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
+ .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
+ .ka_width = kaw }
+
+#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+ .hold_shift = hs, .bypass_shift = bs }
+
+
+static const struct iproc_pll_ctrl genpll0 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 5, 1, 0),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl genpll0_clk[] = {
+ [BCM_SR_GENPLL0_SATA_CLK] = {
+ .channel = BCM_SR_GENPLL0_SATA_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL0_SCR_CLK] = {
+ .channel = BCM_SR_GENPLL0_SCR_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 7, 1, 13),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+ [BCM_SR_GENPLL0_250M_CLK] = {
+ .channel = BCM_SR_GENPLL0_250M_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 8, 2, 14),
+ .mdiv = REG_VAL(0x18, 20, 9),
+ },
+ [BCM_SR_GENPLL0_PCIE_AXI_CLK] = {
+ .channel = BCM_SR_GENPLL0_PCIE_AXI_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 9, 3, 15),
+ .mdiv = REG_VAL(0x1c, 0, 9),
+ },
+ [BCM_SR_GENPLL0_PAXC_AXI_X2_CLK] = {
+ .channel = BCM_SR_GENPLL0_PAXC_AXI_X2_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 10, 4, 16),
+ .mdiv = REG_VAL(0x1c, 10, 9),
+ },
+ [BCM_SR_GENPLL0_PAXC_AXI_CLK] = {
+ .channel = BCM_SR_GENPLL0_PAXC_AXI_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 11, 5, 17),
+ .mdiv = REG_VAL(0x1c, 20, 9),
+ },
+};
+
+static void __init sr_genpll0_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &genpll0, NULL, 0, genpll0_clk,
+ ARRAY_SIZE(genpll0_clk));
+}
+CLK_OF_DECLARE(sr_genpll0_clk, "brcm,sr-genpll0",
+ sr_genpll0_clk_init);
+
+static const struct iproc_pll_ctrl genpll3 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 19, 18),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl genpll3_clk[] = {
+ [BCM_SR_GENPLL3_HSLS_CLK] = {
+ .channel = BCM_SR_GENPLL3_HSLS_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL3_SDIO_CLK] = {
+ .channel = BCM_SR_GENPLL3_SDIO_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 7, 1, 13),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+};
+
+static void __init sr_genpll3_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &genpll3, NULL, 0, genpll3_clk,
+ ARRAY_SIZE(genpll3_clk));
+}
+CLK_OF_DECLARE(sr_genpll3_clk, "brcm,sr-genpll3",
+ sr_genpll3_clk_init);
+
+static const struct iproc_pll_ctrl genpll4 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 25, 24),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl genpll4_clk[] = {
+ [BCM_SR_GENPLL4_CCN_CLK] = {
+ .channel = BCM_SR_GENPLL4_CCN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+};
+
+static void __init sr_genpll4_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &genpll4, NULL, 0, genpll4_clk,
+ ARRAY_SIZE(genpll4_clk));
+}
+CLK_OF_DECLARE(sr_genpll4_clk, "brcm,sr-genpll4",
+ sr_genpll4_clk_init);
+
+static const struct iproc_pll_ctrl genpll5 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 1, 0),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl genpll5_clk[] = {
+ [BCM_SR_GENPLL5_FS_CLK] = {
+ .channel = BCM_SR_GENPLL5_FS_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL5_SPU_CLK] = {
+ .channel = BCM_SR_GENPLL5_SPU_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+};
+
+static void __init sr_genpll5_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &genpll5, NULL, 0, genpll5_clk,
+ ARRAY_SIZE(genpll5_clk));
+}
+CLK_OF_DECLARE(sr_genpll5_clk, "brcm,sr-genpll5",
+ sr_genpll5_clk_init);
+
+static const struct iproc_pll_ctrl lcpll0 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 19, 18),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll0_clk[] = {
+ [BCM_SR_LCPLL0_SATA_REF_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+ [BCM_SR_LCPLL0_USB_REF_CLK] = {
+ .channel = BCM_SR_LCPLL0_USB_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 8, 2, 14),
+ .mdiv = REG_VAL(0x14, 10, 9),
+ },
+ [BCM_SR_LCPLL0_SATA_REFPN_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_REFPN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 9, 3, 15),
+ .mdiv = REG_VAL(0x14, 20, 9),
+ },
+};
+
+static void __init sr_lcpll0_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
+ ARRAY_SIZE(lcpll0_clk));
+}
+CLK_OF_DECLARE(sr_lcpll0_clk, "brcm,sr-lcpll0",
+ sr_lcpll0_clk_init);
+
+static const struct iproc_pll_ctrl lcpll1 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 22, 21),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll1_clk[] = {
+ [BCM_SR_LCPLL1_WAN_CLK] = {
+ .channel = BCM_SR_LCPLL1_WAN_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+};
+
+static void __init sr_lcpll1_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &lcpll1, NULL, 0, lcpll1_clk,
+ ARRAY_SIZE(lcpll1_clk));
+}
+CLK_OF_DECLARE(sr_lcpll1_clk, "brcm,sr-lcpll1",
+ sr_lcpll1_clk_init);
+
+static const struct iproc_pll_ctrl lcpll_pcie = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 25, 24),
+ .reset = RESET_VAL(0x0, 31, 30),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+ .status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll_pcie_clk[] = {
+ [BCM_SR_LCPLL_PCIE_PHY_REF_CLK] = {
+ .channel = BCM_SR_LCPLL_PCIE_PHY_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 7, 1, 13),
+ .mdiv = REG_VAL(0x14, 0, 9),
+ },
+};
+
+static void __init sr_lcpll_pcie_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &lcpll_pcie, NULL, 0, lcpll_pcie_clk,
+ ARRAY_SIZE(lcpll_pcie_clk));
+}
+CLK_OF_DECLARE(sr_lcpll_pcie_clk, "brcm,sr-lcpll-pcie",
+ sr_lcpll_pcie_clk_init);
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 04/11] arm64: dts: Initial DTS files for Broadcom Stingray SOC
2017-05-15 12:02 [PATCH v2 00/11] Broadcom Stingray SOC Initial Support Anup Patel
` (2 preceding siblings ...)
2017-05-15 12:02 ` [PATCH v2 03/11] clk: bcm: Add clocks " Anup Patel
@ 2017-05-15 12:02 ` Anup Patel
2017-05-15 13:13 ` Mark Rutland
2017-05-15 12:02 ` [PATCH v2 05/11] arm64: dts: Add clock DT nodes for " Anup Patel
` (6 subsequent siblings)
10 siblings, 1 reply; 15+ messages in thread
From: Anup Patel @ 2017-05-15 12:02 UTC (permalink / raw)
To: linux-arm-kernel
The Broadcom Stingray SoC is a new member in Broadcom iProc
SoC family.
This patch adds initial DTS files for Broadcom Stingray SoC
and two of its reference boards (bcm958742k and bcm958742t).
We have lot of reference boards and large number of devices
in Broadcom Stingray SoC so eventually we will have quite
a few DTS files for Stingray. To tackle, we have added a
separate directory for Stingray DTS files.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
---
arch/arm64/boot/dts/broadcom/Makefile | 1 +
arch/arm64/boot/dts/broadcom/stingray/Makefile | 6 +
.../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 58 ++++
.../boot/dts/broadcom/stingray/bcm958742k.dts | 48 ++++
.../boot/dts/broadcom/stingray/bcm958742t.dts | 40 +++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 307 +++++++++++++++++++++
6 files changed, 460 insertions(+)
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/Makefile
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index bfa8f8e..f11bdd6 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,6 +1,7 @@
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb
+dts-dirs := stingray
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/broadcom/stingray/Makefile b/arch/arm64/boot/dts/broadcom/stingray/Makefile
new file mode 100644
index 0000000..f70028e
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/Makefile
@@ -0,0 +1,6 @@
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
new file mode 100644
index 0000000..0a427da
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -0,0 +1,58 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "stingray.dtsi"
+
+/ {
+ chosen { /* Default kernel args */
+ bootargs = "root=/dev/ram rw rootwait \
+ earlycon=uart8250,mmio32,0x68a10000 \
+ pci=pcie_bus_safe cma=64M";
+ linux,stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart0;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+};
+
+&memory { /* Default DRAM banks */
+ reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
+ <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
new file mode 100644
index 0000000..c309cda
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
@@ -0,0 +1,48 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm958742-base.dtsi"
+
+/ {
+ compatible = "brcm,bcm958742k", "brcm,stingray";
+ model = "Stingray Combo SVK (BCM958742K)";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
new file mode 100644
index 0000000..6ebe399
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
@@ -0,0 +1,40 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm958742-base.dtsi"
+
+/ {
+ compatible = "brcm,bcm958742t", "brcm,stingray";
+ model = "Stingray SST100 (BCM958742T)";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
new file mode 100644
index 0000000..c82e1d8
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -0,0 +1,307 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "brcm,stingray";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu at 000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ };
+
+ cpu at 001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER0_L2>;
+ };
+
+ cpu at 100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER1_L2>;
+ };
+
+ cpu at 101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER1_L2>;
+ };
+
+ cpu at 200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER2_L2>;
+ };
+
+ cpu at 201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x201>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER2_L2>;
+ };
+
+ cpu at 300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER3_L2>;
+ };
+
+ cpu at 301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x301>;
+ enable-method = "psci";
+ next-level-cache = <&CLUSTER3_L2>;
+ };
+
+ CLUSTER0_L2: l2-cache at 000 {
+ compatible = "cache";
+ };
+
+ CLUSTER1_L2: l2-cache at 100 {
+ compatible = "cache";
+ };
+
+ CLUSTER2_L2: l2-cache at 200 {
+ compatible = "cache";
+ };
+
+ CLUSTER3_L2: l2-cache at 300 {
+ compatible = "cache";
+ };
+ };
+
+ memory: memory at 80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x40000000>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ scr {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x61000000 0x05000000>;
+
+ gic: interrupt-controller at 63c00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ reg = <0x02c00000 0x010000>, /* GICD */
+ <0x02e00000 0x600000>; /* GICR */
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+
+ gic_its: gic-its at 63c20000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x02c20000 0x10000>;
+ };
+ };
+
+ smmu: mmu at 64000000 {
+ compatible = "arm,mmu-500";
+ reg = <0x03000000 0x80000>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <2>;
+ };
+ };
+
+ hsls {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x68900000 0x17700000>;
+
+ uart0: uart at 68a00000 {
+ device_type = "serial";
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00100000 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <25000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart1: uart at 68a10000 {
+ device_type = "serial";
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00110000 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <25000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart2: uart at 68a20000 {
+ device_type = "serial";
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00120000 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <25000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart3: uart at 68a30000 {
+ device_type = "serial";
+ compatible = "snps,dw-apb-uart";
+ reg = <0x00130000 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <25000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ hwrng: hwrng at 68b20000 {
+ compatible = "brcm,iproc-rng200";
+ reg = <0x00220000 0x28>;
+ };
+ };
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 04/11] arm64: dts: Initial DTS files for Broadcom Stingray SOC
2017-05-15 12:02 ` [PATCH v2 04/11] arm64: dts: Initial DTS files for Broadcom " Anup Patel
@ 2017-05-15 13:13 ` Mark Rutland
2017-05-15 16:04 ` Scott Branden
2017-05-16 10:47 ` Anup Patel
0 siblings, 2 replies; 15+ messages in thread
From: Mark Rutland @ 2017-05-15 13:13 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Mon, May 15, 2017 at 05:32:14PM +0530, Anup Patel wrote:
> +/ {
> + chosen { /* Default kernel args */
> + bootargs = "root=/dev/ram rw rootwait \
> + earlycon=uart8250,mmio32,0x68a10000 \
> + pci=pcie_bus_safe cma=64M";
Why do we need all of these?
> + linux,stdout-path = "serial0:115200n8";
Please drop the 'linux,' prefix here.
[...]
> + memory: memory at 80000000 {
> + device_type = "memory";
> + reg = <0x00000000 0x80000000 0 0x40000000>;
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
> + IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
> + IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
> + IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
> + IRQ_TYPE_LEVEL_LOW)>;
GICv3 PPIs don't have a mask. See
Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
Please remove the GIC_CPU_MASK_*() uses here and in this dts. They
shouldn't be there.
Thanks,
Mark.
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH v2 04/11] arm64: dts: Initial DTS files for Broadcom Stingray SOC
2017-05-15 13:13 ` Mark Rutland
@ 2017-05-15 16:04 ` Scott Branden
2017-05-16 10:47 ` Anup Patel
1 sibling, 0 replies; 15+ messages in thread
From: Scott Branden @ 2017-05-15 16:04 UTC (permalink / raw)
To: linux-arm-kernel
On 17-05-15 06:13 AM, Mark Rutland wrote:
> Hi,
>
> On Mon, May 15, 2017 at 05:32:14PM +0530, Anup Patel wrote:
>> +/ {
>> + chosen { /* Default kernel args */
>> + bootargs = "root=/dev/ram rw rootwait \
>> + earlycon=uart8250,mmio32,0x68a10000 \
>> + pci=pcie_bus_safe cma=64M";
>
> Why do we need all of these?
Agreed - we don't need the default kernels args here - they are passed
in by bootloader as needed.
>
>> + linux,stdout-path = "serial0:115200n8";
>
> Please drop the 'linux,' prefix here.
>
> [...]
>
>> + memory: memory at 80000000 {
>> + device_type = "memory";
>> + reg = <0x00000000 0x80000000 0 0x40000000>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-0.2";
>> + method = "smc";
>> + };
>> +
>> + pmu {
>> + compatible = "arm,armv8-pmuv3";
>> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
>> + IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
>> + IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
>> + IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
>> + IRQ_TYPE_LEVEL_LOW)>;
>
> GICv3 PPIs don't have a mask. See
>
> Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
>
> Please remove the GIC_CPU_MASK_*() uses here and in this dts. They
> shouldn't be there.
>
> Thanks,
> Mark.
>
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH v2 04/11] arm64: dts: Initial DTS files for Broadcom Stingray SOC
2017-05-15 13:13 ` Mark Rutland
2017-05-15 16:04 ` Scott Branden
@ 2017-05-16 10:47 ` Anup Patel
1 sibling, 0 replies; 15+ messages in thread
From: Anup Patel @ 2017-05-16 10:47 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, May 15, 2017 at 6:43 PM, Mark Rutland <mark.rutland@arm.com> wrote:
> Hi,
>
> On Mon, May 15, 2017 at 05:32:14PM +0530, Anup Patel wrote:
>> +/ {
>> + chosen { /* Default kernel args */
>> + bootargs = "root=/dev/ram rw rootwait \
>> + earlycon=uart8250,mmio32,0x68a10000 \
>> + pci=pcie_bus_safe cma=64M";
>
> Why do we need all of these?
Yes, we don't need bootargs here. This were just for reference.
I will remove default bootargs because its responsibility of
bootloader to add it.
>
>> + linux,stdout-path = "serial0:115200n8";
>
> Please drop the 'linux,' prefix here.
Sure, will do.
>
> [...]
>
>> + memory: memory at 80000000 {
>> + device_type = "memory";
>> + reg = <0x00000000 0x80000000 0 0x40000000>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-0.2";
>> + method = "smc";
>> + };
>> +
>> + pmu {
>> + compatible = "arm,armv8-pmuv3";
>> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
>> + IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
>> + IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
>> + IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
>> + IRQ_TYPE_LEVEL_LOW)>;
>
> GICv3 PPIs don't have a mask. See
>
> Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
>
> Please remove the GIC_CPU_MASK_*() uses here and in this dts. They
> shouldn't be there.
Thanks for catching.
We had taken care of this in PMU DT node but did not cleanup timer
DT node.
Thanks,
Anup
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2 05/11] arm64: dts: Add clock DT nodes for Stingray SOC
2017-05-15 12:02 [PATCH v2 00/11] Broadcom Stingray SOC Initial Support Anup Patel
` (3 preceding siblings ...)
2017-05-15 12:02 ` [PATCH v2 04/11] arm64: dts: Initial DTS files for Broadcom " Anup Patel
@ 2017-05-15 12:02 ` Anup Patel
2017-05-15 12:02 ` [PATCH v2 06/11] arm64: dts: Add NAND " Anup Patel
` (5 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Anup Patel @ 2017-05-15 12:02 UTC (permalink / raw)
To: linux-arm-kernel
From: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
This patch describes Stingray SOC clock tree using
DT nodes in Stingray DTS.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
.../boot/dts/broadcom/stingray/stingray-clock.dtsi | 170 +++++++++++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 9 ++
2 files changed, 179 insertions(+)
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
new file mode 100644
index 0000000..070e22e2
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -0,0 +1,170 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-sr.h>
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+
+ crmu_ref25m: crmu_ref25m {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&osc>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ genpll0: genpll0 at 6641d104 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll0";
+ reg = <0x0001d104 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll0", "clk_125", "clk_scr",
+ "clk_250", "clk_pcie_axi",
+ "clk_paxc_axi_x2",
+ "clk_paxc_axi";
+ };
+
+ genpll3: genpll3 at 6641d1e0 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll3";
+ reg = <0x0001d1e0 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll3", "clk_hsls",
+ "clk_sdio";
+ };
+
+ genpll4: genpll4 at 6641d214 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll4";
+ reg = <0x0001d214 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll4", "clk_ccn",
+ "clk_tpiu_pll", "noc_clk",
+ "pll_chclk_fs4",
+ "clk_bridge_fscpu";
+ };
+
+ genpll5: genpll5 at 6641d248 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll5";
+ reg = <0x0001d248 0x32>,
+ <0x0001c870 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll5", "fs4_hf_clk",
+ "crypto_ae_clk", "raid_ae_clk";
+ };
+
+ lcpll0: lcpll0 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-lcpll0";
+ reg = <0x0001d0c4 0x3c>,
+ <0x0001c870 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "clk_sata_refp",
+ "clk_sata_refn", "clk_sata_350",
+ "clk_sata_500";
+ };
+
+ lcpll1: lcpll1 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-lcpll1";
+ reg = <0x0001d138 0x3c>,
+ <0x0001c870 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll1", "clk_wanpn",
+ "clk_usb_ref",
+ "timesync_evt_clk";
+ };
+
+ hsls_clk: hsls_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 1>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ hsls_div2_clk: hsls_div2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+
+ };
+
+ hsls_div4_clk: hsls_div4_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ hsls_25m_clk: hsls_25m_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&crmu_ref25m>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ hsls_25m_div2_clk: hsls_25m_div2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&hsls_25m_clk>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ sdio0_clk: sdio0_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+
+ sdio1_clk: sdio1_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index c82e1d8..24856e3 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -249,6 +249,15 @@
};
};
+ crmu: crmu {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x66400000 0x100000>;
+
+ #include "stingray-clock.dtsi"
+ };
+
hsls {
compatible = "simple-bus";
#address-cells = <1>;
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 06/11] arm64: dts: Add NAND DT nodes for Stingray SOC
2017-05-15 12:02 [PATCH v2 00/11] Broadcom Stingray SOC Initial Support Anup Patel
` (4 preceding siblings ...)
2017-05-15 12:02 ` [PATCH v2 05/11] arm64: dts: Add clock DT nodes for " Anup Patel
@ 2017-05-15 12:02 ` Anup Patel
2017-05-15 12:02 ` [PATCH v2 07/11] arm64: dts: Add pinctrl " Anup Patel
` (4 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Anup Patel @ 2017-05-15 12:02 UTC (permalink / raw)
To: linux-arm-kernel
From: Pramod Kumar <pramod.kumar@broadcom.com>
This patch adds NAND controller DT Node and NAND chip DT
node for Stingray SOC and Stingray reference boards.
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi | 15 +++++++++++++++
arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 13 +++++++++++++
2 files changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index 0a427da..ce46224 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -56,3 +56,18 @@
&uart1 {
status = "okay";
};
+
+&nand {
+ status = "ok";
+ nandcs at 0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <16>;
+ brcm,nand-oob-sector-size = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 24856e3..c5493e7 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -312,5 +312,18 @@
compatible = "brcm,iproc-rng200";
reg = <0x00220000 0x28>;
};
+
+ nand: nand at 68c60000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+ reg = <0x00360000 0x600>,
+ <0x0050a408 0x600>,
+ <0x00360f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ brcm,nand-has-wp;
+ status = "disabled";
+ };
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 07/11] arm64: dts: Add pinctrl DT nodes for Stingray SOC
2017-05-15 12:02 [PATCH v2 00/11] Broadcom Stingray SOC Initial Support Anup Patel
` (5 preceding siblings ...)
2017-05-15 12:02 ` [PATCH v2 06/11] arm64: dts: Add NAND " Anup Patel
@ 2017-05-15 12:02 ` Anup Patel
2017-05-15 12:02 ` [PATCH v2 08/11] arm64: dts: Add GPIO " Anup Patel
` (3 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Anup Patel @ 2017-05-15 12:02 UTC (permalink / raw)
To: linux-arm-kernel
From: Pramod Kumar <pramod.kumar@broadcom.com>
This patch adds pinctrl and pinmux related DT nodes for
Stingray SOC.
For manageability, pinctrl and pinmum DT nodes are added
as separate DTSi file and included in main DTSi file.
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
.../dts/broadcom/stingray/stingray-pinctrl.dtsi | 345 +++++++++++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 2 +
.../dt-bindings/pinctrl/brcm,pinctrl-stingray.h | 68 ++++
3 files changed, 415 insertions(+)
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
new file mode 100644
index 0000000..af5d480
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -0,0 +1,345 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h>
+
+ pinconf: pinconf at 68a40000 {
+ compatible = "pinconf-single";
+ reg = <0x00140000 0x250>;
+ pinctrl-single,register-width = <32>;
+
+ /* pinconf functions */
+ };
+
+ pinmux: pinmux at 68a4029c {
+ compatible = "pinctrl-single";
+ reg = <0x0014029c 0x250>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xf>;
+ pinctrl-single,gpio-range = <
+ &range 0 154 MODE_GPIO
+ >;
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+
+ /* pinctrl functions */
+ tsio_pins: pinmux_gpio_14 {
+ pinctrl-single,pins = <
+ 0x038 MODE_NITRO /* tsio_0 */
+ 0x03c MODE_NITRO /* tsio_1 */
+ >;
+ };
+
+ nor_pins: pinmux_pnor_adv_n {
+ pinctrl-single,pins = <
+ 0x0ac MODE_PNOR /* nand_ce1_n */
+ 0x0b0 MODE_PNOR /* nand_ce0_n */
+ 0x0b4 MODE_PNOR /* nand_we_n */
+ 0x0b8 MODE_PNOR /* nand_wp_n */
+ 0x0bc MODE_PNOR /* nand_re_n */
+ 0x0c0 MODE_PNOR /* nand_rdy_bsy_n */
+ 0x0c4 MODE_PNOR /* nand_io0_0 */
+ 0x0c8 MODE_PNOR /* nand_io1_0 */
+ 0x0cc MODE_PNOR /* nand_io2_0 */
+ 0x0d0 MODE_PNOR /* nand_io3_0 */
+ 0x0d4 MODE_PNOR /* nand_io4_0 */
+ 0x0d8 MODE_PNOR /* nand_io5_0 */
+ 0x0dc MODE_PNOR /* nand_io6_0 */
+ 0x0e0 MODE_PNOR /* nand_io7_0 */
+ 0x0e4 MODE_PNOR /* nand_io8_0 */
+ 0x0e8 MODE_PNOR /* nand_io9_0 */
+ 0x0ec MODE_PNOR /* nand_io10_0 */
+ 0x0f0 MODE_PNOR /* nand_io11_0 */
+ 0x0f4 MODE_PNOR /* nand_io12_0 */
+ 0x0f8 MODE_PNOR /* nand_io13_0 */
+ 0x0fc MODE_PNOR /* nand_io14_0 */
+ 0x100 MODE_PNOR /* nand_io15_0 */
+ 0x104 MODE_PNOR /* nand_ale_0 */
+ 0x108 MODE_PNOR /* nand_cle_0 */
+ 0x040 MODE_PNOR /* pnor_adv_n */
+ 0x044 MODE_PNOR /* pnor_baa_n */
+ 0x048 MODE_PNOR /* pnor_bls_0_n */
+ 0x04c MODE_PNOR /* pnor_bls_1_n */
+ 0x050 MODE_PNOR /* pnor_cre */
+ 0x054 MODE_PNOR /* pnor_cs_2_n */
+ 0x058 MODE_PNOR /* pnor_cs_1_n */
+ 0x05c MODE_PNOR /* pnor_cs_0_n */
+ 0x060 MODE_PNOR /* pnor_we_n */
+ 0x064 MODE_PNOR /* pnor_oe_n */
+ 0x068 MODE_PNOR /* pnor_intr */
+ 0x06c MODE_PNOR /* pnor_dat_0 */
+ 0x070 MODE_PNOR /* pnor_dat_1 */
+ 0x074 MODE_PNOR /* pnor_dat_2 */
+ 0x078 MODE_PNOR /* pnor_dat_3 */
+ 0x07c MODE_PNOR /* pnor_dat_4 */
+ 0x080 MODE_PNOR /* pnor_dat_5 */
+ 0x084 MODE_PNOR /* pnor_dat_6 */
+ 0x088 MODE_PNOR /* pnor_dat_7 */
+ 0x08c MODE_PNOR /* pnor_dat_8 */
+ 0x090 MODE_PNOR /* pnor_dat_9 */
+ 0x094 MODE_PNOR /* pnor_dat_10 */
+ 0x098 MODE_PNOR /* pnor_dat_11 */
+ 0x09c MODE_PNOR /* pnor_dat_12 */
+ 0x0a0 MODE_PNOR /* pnor_dat_13 */
+ 0x0a4 MODE_PNOR /* pnor_dat_14 */
+ 0x0a8 MODE_PNOR /* pnor_dat_15 */
+ >;
+ };
+
+ nand_pins: pinmux_nand_ce1_n {
+ pinctrl-single,pins = <
+ 0x0ac MODE_NAND /* nand_ce1_n */
+ 0x0b0 MODE_NAND /* nand_ce0_n */
+ 0x0b4 MODE_NAND /* nand_we_n */
+ 0x0b8 MODE_NAND /* nand_wp_n */
+ 0x0bc MODE_NAND /* nand_re_n */
+ 0x0c0 MODE_NAND /* nand_rdy_bsy_n */
+ 0x0c4 MODE_NAND /* nand_io0_0 */
+ 0x0c8 MODE_NAND /* nand_io1_0 */
+ 0x0cc MODE_NAND /* nand_io2_0 */
+ 0x0d0 MODE_NAND /* nand_io3_0 */
+ 0x0d4 MODE_NAND /* nand_io4_0 */
+ 0x0d8 MODE_NAND /* nand_io5_0 */
+ 0x0dc MODE_NAND /* nand_io6_0 */
+ 0x0e0 MODE_NAND /* nand_io7_0 */
+ 0x0e4 MODE_NAND /* nand_io8_0 */
+ 0x0e8 MODE_NAND /* nand_io9_0 */
+ 0x0ec MODE_NAND /* nand_io10_0 */
+ 0x0f0 MODE_NAND /* nand_io11_0 */
+ 0x0f4 MODE_NAND /* nand_io12_0 */
+ 0x0f8 MODE_NAND /* nand_io13_0 */
+ 0x0fc MODE_NAND /* nand_io14_0 */
+ 0x100 MODE_NAND /* nand_io15_0 */
+ 0x104 MODE_NAND /* nand_ale_0 */
+ 0x108 MODE_NAND /* nand_cle_0 */
+ >;
+ };
+
+ pwm0_pins: pinmux_pwm_0 {
+ pinctrl-single,pins = <
+ 0x10c MODE_NITRO
+ >;
+ };
+
+ pwm1_pins: pinmux_pwm_1 {
+ pinctrl-single,pins = <
+ 0x110 MODE_NITRO
+ >;
+ };
+
+ pwm2_pins: pinmux_pwm_2 {
+ pinctrl-single,pins = <
+ 0x114 MODE_NITRO
+ >;
+ };
+
+ pwm3_pins: pinmux_pwm_3 {
+ pinctrl-single,pins = <
+ 0x118 MODE_NITRO
+ >;
+ };
+
+ dbu_rxd_pins: pinmux_uart1_sin_nitro {
+ pinctrl-single,pins = <
+ 0x11c MODE_NITRO /* dbu_rxd */
+ 0x120 MODE_NITRO /* dbu_txd */
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_sin_nand {
+ pinctrl-single,pins = <
+ 0x11c MODE_NAND /* uart1_sin */
+ 0x120 MODE_NAND /* uart1_out */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_sin {
+ pinctrl-single,pins = <
+ 0x124 MODE_NITRO /* uart2_sin */
+ 0x128 MODE_NITRO /* uart2_out */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_sin {
+ pinctrl-single,pins = <
+ 0x12c MODE_NITRO /* uart3_sin */
+ 0x130 MODE_NITRO /* uart3_out */
+ >;
+ };
+
+ i2s_pins: pinmux_i2s_bitclk {
+ pinctrl-single,pins = <
+ 0x134 MODE_NITRO /* i2s_bitclk */
+ 0x138 MODE_NITRO /* i2s_sdout */
+ 0x13c MODE_NITRO /* i2s_sdin */
+ 0x140 MODE_NITRO /* i2s_ws */
+ 0x144 MODE_NITRO /* i2s_mclk */
+ 0x148 MODE_NITRO /* i2s_spdif_out */
+ >;
+ };
+
+ qspi_pins: pinumx_qspi_hold_n {
+ pinctrl-single,pins = <
+ 0x14c MODE_NAND /* qspi_hold_n */
+ 0x150 MODE_NAND /* qspi_wp_n */
+ 0x154 MODE_NAND /* qspi_sck */
+ 0x158 MODE_NAND /* qspi_cs_n */
+ 0x15c MODE_NAND /* qspi_mosi */
+ 0x160 MODE_NAND /* qspi_miso */
+ >;
+ };
+
+ mdio_pins: pinumx_ext_mdio {
+ pinctrl-single,pins = <
+ 0x164 MODE_NITRO /* ext_mdio */
+ 0x168 MODE_NITRO /* ext_mdc */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_sda {
+ pinctrl-single,pins = <
+ 0x16c MODE_NITRO /* i2c0_sda */
+ 0x170 MODE_NITRO /* i2c0_scl */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_sda {
+ pinctrl-single,pins = <
+ 0x174 MODE_NITRO /* i2c1_sda */
+ 0x178 MODE_NITRO /* i2c1_scl */
+ >;
+ };
+
+ sdio0_pins: pinmux_sdio0_cd_l {
+ pinctrl-single,pins = <
+ 0x17c MODE_NITRO /* sdio0_cd_l */
+ 0x180 MODE_NITRO /* sdio0_clk_sdcard */
+ 0x184 MODE_NITRO /* sdio0_data0 */
+ 0x188 MODE_NITRO /* sdio0_data1 */
+ 0x18c MODE_NITRO /* sdio0_data2 */
+ 0x190 MODE_NITRO /* sdio0_data3 */
+ 0x194 MODE_NITRO /* sdio0_data4 */
+ 0x198 MODE_NITRO /* sdio0_data5 */
+ 0x19c MODE_NITRO /* sdio0_data6 */
+ 0x1a0 MODE_NITRO /* sdio0_data7 */
+ 0x1a4 MODE_NITRO /* sdio0_cmd */
+ 0x1a8 MODE_NITRO /* sdio0_emmc_rst_n */
+ 0x1ac MODE_NITRO /* sdio0_led_on */
+ 0x1b0 MODE_NITRO /* sdio0_wp */
+ >;
+ };
+
+ sdio1_pins: pinmux_sdio1_cd_l {
+ pinctrl-single,pins = <
+ 0x1b4 MODE_NITRO /* sdio1_cd_l */
+ 0x1b8 MODE_NITRO /* sdio1_clk_sdcard */
+ 0x1bc MODE_NITRO /* sdio1_data0 */
+ 0x1c0 MODE_NITRO /* sdio1_data1 */
+ 0x1c4 MODE_NITRO /* sdio1_data2 */
+ 0x1c8 MODE_NITRO /* sdio1_data3 */
+ 0x1cc MODE_NITRO /* sdio1_data4 */
+ 0x1d0 MODE_NITRO /* sdio1_data5 */
+ 0x1d4 MODE_NITRO /* sdio1_data6 */
+ 0x1d8 MODE_NITRO /* sdio1_data7 */
+ 0x1dc MODE_NITRO /* sdio1_cmd */
+ 0x1e0 MODE_NITRO /* sdio1_emmc_rst_n */
+ 0x1e4 MODE_NITRO /* sdio1_led_on */
+ 0x1e8 MODE_NITRO /* sdio1_wp */
+ >;
+ };
+
+ spi0_pins: pinmux_spi0_sck_nand {
+ pinctrl-single,pins = <
+ 0x1ec MODE_NITRO /* spi0_sck */
+ 0x1f0 MODE_NITRO /* spi0_rxd */
+ 0x1f4 MODE_NITRO /* spi0_fss */
+ 0x1f8 MODE_NITRO /* spi0_txd */
+ >;
+ };
+
+ spi1_pins: pinmux_spi1_sck_nand {
+ pinctrl-single,pins = <
+ 0x1fc MODE_NITRO /* spi1_sck */
+ 0x200 MODE_NITRO /* spi1_rxd */
+ 0x204 MODE_NITRO /* spi1_fss */
+ 0x208 MODE_NITRO /* spi1_txd */
+ >;
+ };
+
+ nuart_pins: pinmux_uart0_sin_nitro {
+ pinctrl-single,pins = <
+ 0x20c MODE_NITRO /* nuart_rxd */
+ 0x210 MODE_NITRO /* nuart_txd */
+ >;
+ };
+
+ uart0_pins: pinumux_uart0_sin_nand {
+ pinctrl-single,pins = <
+ 0x20c MODE_NAND /* uart0_sin */
+ 0x210 MODE_NAND /* uart0_out */
+ 0x214 MODE_NAND /* uart0_rts */
+ 0x218 MODE_NAND /* uart0_cts */
+ 0x21c MODE_NAND /* uart0_dtr */
+ 0x220 MODE_NAND /* uart0_dcd */
+ 0x224 MODE_NAND /* uart0_dsr */
+ 0x228 MODE_NAND /* uart0_ri */
+ >;
+ };
+
+ drdu2_pins: pinmux_drdu2_overcurrent {
+ pinctrl-single,pins = <
+ 0x22c MODE_NITRO /* drdu2_overcurrent */
+ 0x230 MODE_NITRO /* drdu2_vbus_ppc */
+ 0x234 MODE_NITRO /* drdu2_vbus_present */
+ 0x238 MODE_NITRO /* drdu2_id */
+ >;
+ };
+
+ drdu3_pins: pinmux_drdu3_overcurrent {
+ pinctrl-single,pins = <
+ 0x23c MODE_NITRO /* drdu3_overcurrent */
+ 0x240 MODE_NITRO /* drdu3_vbus_ppc */
+ 0x244 MODE_NITRO /* drdu3_vbus_present */
+ 0x248 MODE_NITRO /* drdu3_id */
+ >;
+ };
+
+ usb3h_pins: pinmux_usb3h_overcurrent {
+ pinctrl-single,pins = <
+ 0x24c MODE_NITRO /* usb3h_overcurrent */
+ 0x250 MODE_NITRO /* usb3h_vbus_ppc */
+ >;
+ };
+ };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index c5493e7..c3a8cee 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -264,6 +264,8 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x68900000 0x17700000>;
+ #include "stingray-pinctrl.dtsi"
+
uart0: uart at 68a00000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
diff --git a/include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h b/include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h
new file mode 100644
index 0000000..caa6c66
--- /dev/null
+++ b/include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h
@@ -0,0 +1,68 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
+#define __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
+
+/* Alternate functions available in MUX controller */
+#define MODE_NITRO 0
+#define MODE_NAND 1
+#define MODE_PNOR 2
+#define MODE_GPIO 3
+
+/* Pad configuration attribute */
+#define PAD_SLEW_RATE_ENA (1 << 0)
+#define PAD_SLEW_RATE_ENA_MASK (1 << 0)
+
+#define PAD_DRIVE_STRENGTH_2_MA (0 << 1)
+#define PAD_DRIVE_STRENGTH_4_MA (1 << 1)
+#define PAD_DRIVE_STRENGTH_6_MA (2 << 1)
+#define PAD_DRIVE_STRENGTH_8_MA (3 << 1)
+#define PAD_DRIVE_STRENGTH_10_MA (4 << 1)
+#define PAD_DRIVE_STRENGTH_12_MA (5 << 1)
+#define PAD_DRIVE_STRENGTH_14_MA (6 << 1)
+#define PAD_DRIVE_STRENGTH_16_MA (7 << 1)
+#define PAD_DRIVE_STRENGTH_MASK (7 << 1)
+
+#define PAD_PULL_UP_ENA (1 << 4)
+#define PAD_PULL_UP_ENA_MASK (1 << 4)
+
+#define PAD_PULL_DOWN_ENA (1 << 5)
+#define PAD_PULL_DOWN_ENA_MASK (1 << 5)
+
+#define PAD_INPUT_PATH_DIS (1 << 6)
+#define PAD_INPUT_PATH_DIS_MASK (1 << 6)
+
+#define PAD_HYSTERESIS_ENA (1 << 7)
+#define PAD_HYSTERESIS_ENA_MASK (1 << 7)
+
+#endif
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 08/11] arm64: dts: Add GPIO DT nodes for Stingray SOC
2017-05-15 12:02 [PATCH v2 00/11] Broadcom Stingray SOC Initial Support Anup Patel
` (6 preceding siblings ...)
2017-05-15 12:02 ` [PATCH v2 07/11] arm64: dts: Add pinctrl " Anup Patel
@ 2017-05-15 12:02 ` Anup Patel
2017-05-15 12:02 ` [PATCH v2 09/11] arm64: dts: Add I2C DT nodes for Stingray SoC Anup Patel
` (2 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Anup Patel @ 2017-05-15 12:02 UTC (permalink / raw)
To: linux-arm-kernel
From: Pramod Kumar <pramod.kumar@broadcom.com>
The GPIOs on Stingray SOC are based on iProc GPIOs hence
using this we add GPIO DT nodes for Stingray SOC.
Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index c3a8cee..2b24d07 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -256,6 +256,14 @@
ranges = <0x0 0x0 0x66400000 0x100000>;
#include "stingray-clock.dtsi"
+
+ gpio_crmu: gpio at 66424800 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x00024800 0x4c>;
+ ngpios = <6>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
};
hsls {
@@ -266,6 +274,32 @@
#include "stingray-pinctrl.dtsi"
+ gpio_hsls: gpio at 689d0000 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x000d0000 0x864>;
+ ngpios = <151>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinmux 0 0 16>,
+ <&pinmux 16 71 2>,
+ <&pinmux 18 131 8>,
+ <&pinmux 26 83 6>,
+ <&pinmux 32 123 4>,
+ <&pinmux 36 43 24>,
+ <&pinmux 60 89 2>,
+ <&pinmux 62 73 4>,
+ <&pinmux 66 95 28>,
+ <&pinmux 94 127 4>,
+ <&pinmux 98 139 10>,
+ <&pinmux 108 16 27>,
+ <&pinmux 135 77 6>,
+ <&pinmux 141 67 4>,
+ <&pinmux 145 149 6>,
+ <&pinmux 151 91 4>;
+ };
+
uart0: uart at 68a00000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 09/11] arm64: dts: Add I2C DT nodes for Stingray SoC
2017-05-15 12:02 [PATCH v2 00/11] Broadcom Stingray SOC Initial Support Anup Patel
` (7 preceding siblings ...)
2017-05-15 12:02 ` [PATCH v2 08/11] arm64: dts: Add GPIO " Anup Patel
@ 2017-05-15 12:02 ` Anup Patel
2017-05-15 12:02 ` [PATCH v2 10/11] arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray Anup Patel
2017-05-15 12:02 ` [PATCH v2 11/11] arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC Anup Patel
10 siblings, 0 replies; 15+ messages in thread
From: Anup Patel @ 2017-05-15 12:02 UTC (permalink / raw)
To: linux-arm-kernel
From: Oza Pawandeep <oza.oza@broadcom.com>
This patch adds I2C DT nodes on Stingray SoC.
Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
.../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 22 ++++++++++++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 20 ++++++++++++++++++++
2 files changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index ce46224..e3f8c89 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -57,6 +57,28 @@
status = "okay";
};
+&i2c0 {
+ status = "okay";
+
+ pca9505: pca9505 at 20 {
+ compatible = "nxp,pca9505";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ pcf8574: pcf8574 at 20 {
+ compatible = "nxp,pcf8574a";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x27>;
+ };
+};
+
&nand {
status = "ok";
nandcs at 0 {
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 2b24d07..476a6fa 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -274,6 +274,16 @@
#include "stingray-pinctrl.dtsi"
+ i2c0: i2c at 689b0000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x000b0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
gpio_hsls: gpio at 689d0000 {
compatible = "brcm,iproc-gpio";
reg = <0x000d0000 0x864>;
@@ -300,6 +310,16 @@
<&pinmux 151 91 4>;
};
+ i2c1: i2c at 689e0000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x000e0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
uart0: uart at 68a00000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 10/11] arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
2017-05-15 12:02 [PATCH v2 00/11] Broadcom Stingray SOC Initial Support Anup Patel
` (8 preceding siblings ...)
2017-05-15 12:02 ` [PATCH v2 09/11] arm64: dts: Add I2C DT nodes for Stingray SoC Anup Patel
@ 2017-05-15 12:02 ` Anup Patel
2017-05-15 12:02 ` [PATCH v2 11/11] arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC Anup Patel
10 siblings, 0 replies; 15+ messages in thread
From: Anup Patel @ 2017-05-15 12:02 UTC (permalink / raw)
To: linux-arm-kernel
We have two instance of PL022 SPI controllers, one instance of
DMA PL330, and one non-secure SP805 Watchdog on Stingray SOC.
This patch adds DT nodes for the above mentioned devices in
Stingray DT.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Pramod KUMAR <pramod.kumar@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
.../boot/dts/broadcom/stingray/bcm958742k.dts | 30 +++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 52 ++++++++++++++++++++++
2 files changed, 82 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
index c309cda..5671669 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
@@ -46,3 +46,33 @@
&uart3 {
status = "okay";
};
+
+&ssp0 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio_hsls 34 0>;
+ status = "okay";
+
+ spi-flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&ssp1 {
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio_hsls 96 0>;
+ status = "okay";
+
+ spi-flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 476a6fa..6d9c9f8 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -284,6 +284,14 @@
status = "disabled";
};
+ wdt0: watchdog at 689c0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x000c0000 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
gpio_hsls: gpio at 689d0000 {
compatible = "brcm,iproc-gpio";
reg = <0x000d0000 0x864>;
@@ -364,11 +372,55 @@
status = "disabled";
};
+ ssp0: ssp at 68a80000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x00180000 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
+ clock-names = "spiclk", "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ssp1: ssp at 68a90000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x00190000 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
+ clock-names = "spiclk", "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
hwrng: hwrng at 68b20000 {
compatible = "brcm,iproc-rng200";
reg = <0x00220000 0x28>;
};
+ dma0: dma at 68c10000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x00310000 0x1000>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ clocks = <&hsls_div2_clk>;
+ clock-names = "apb_pclk";
+ iommus = <&smmu 0x6000 0x0000>;
+ };
+
nand: nand at 68c60000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x00360000 0x600>,
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v2 11/11] arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
2017-05-15 12:02 [PATCH v2 00/11] Broadcom Stingray SOC Initial Support Anup Patel
` (9 preceding siblings ...)
2017-05-15 12:02 ` [PATCH v2 10/11] arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray Anup Patel
@ 2017-05-15 12:02 ` Anup Patel
10 siblings, 0 replies; 15+ messages in thread
From: Anup Patel @ 2017-05-15 12:02 UTC (permalink / raw)
To: linux-arm-kernel
From: Srinath Mannam <srinath.mannam@broadcom.com>
The Stingray SoC has two instances of SDHCI controller
and one instance of iProc PWM.
Let's enable above mentioned devices in Stingray DT.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
.../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 39 ++++++++++++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 28 ++++++++++++++++
2 files changed, 67 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index e3f8c89..6185561 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -46,6 +46,28 @@
serial2 = &uart2;
serial3 = &uart3;
};
+
+ sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl {
+ compatible = "regulator-gpio";
+ regulator-name = "sdio0_vddo_ctrl_reg";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&pca9505 18 0>;
+ states = <3300000 0x0
+ 1800000 0x1>;
+ };
+
+ sdio1_vddo_ctrl_reg: sdio1_vddo_ctrl {
+ compatible = "regulator-gpio";
+ regulator-name = "sdio1_vddo_ctrl_reg";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&pca9505 19 0>;
+ states = <3300000 0x0
+ 1800000 0x1>;
+ };
};
&memory { /* Default DRAM banks */
@@ -57,6 +79,10 @@
status = "okay";
};
+&pwm {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -93,3 +119,16 @@
#size-cells = <1>;
};
};
+
+&sdio0 {
+ vqmmc-supply = <&sdio0_vddo_ctrl_reg>;
+ non-removable;
+ full-pwr-cycle;
+ status = "okay";
+};
+
+&sdio1 {
+ vqmmc-supply = <&sdio1_vddo_ctrl_reg>;
+ full-pwr-cycle;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 6d9c9f8..aa0ecec 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -274,6 +274,14 @@
#include "stingray-pinctrl.dtsi"
+ pwm: pwm at 68910000{
+ compatible = "brcm,iproc-pwm";
+ reg = <0x00010000 0x1000>;
+ clocks = <&crmu_ref25m>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
i2c0: i2c at 689b0000 {
compatible = "brcm,iproc-i2c";
reg = <0x000b0000 0x100>;
@@ -433,5 +441,25 @@
brcm,nand-has-wp;
status = "disabled";
};
+
+ sdio0: sdhci at 68cf1000 {
+ compatible = "brcm,sdhci-iproc";
+ reg = <0x003f1000 0x100>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <8>;
+ clocks = <&sdio0_clk>;
+ iommus = <&smmu 0x6002 0x0000>;
+ status = "disabled";
+ };
+
+ sdio1: sdhci at 68cf2000 {
+ compatible = "brcm,sdhci-iproc";
+ reg = <0x003f2000 0x100>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <8>;
+ clocks = <&sdio1_clk>;
+ iommus = <&smmu 0x6003 0x0000>;
+ status = "disabled";
+ };
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread