[PATCH v2 1/2] clk: Hi3660: change to register crgctrl clock with CLK_OF_DECLARE_DRIVER

[leo.yan@linaro.org (Leo Yan)]

The timer will register into system at very early phase at kernel boot;
if timer needs to use clock, the clock should be get ready in function
of_clk_init() so later the timer driver probe can retrieve clock
successfully. This is finished in below flow on arm64:

  start_kernel()
    `-> time_init()
          `-> of_clk_init(NULL)    => register timer's clock
          `-> clocksource_probe()  => register timer

On Hi3660 the sp804 timer uses clock "osc32k", this clock is registered
as platform driver rather than CLK_OF_DECLARE_DRIVER method. As result,
sp804 timer probe returns failure due if cannot bind clock properly.
To fix the failure, this patch is to change crgctrl clock registration
from platform driver to CLK_OF_DECLARE_DRIVER method so the clocks can
be registered ahead with function of_clk_init() and then timer driver
can use it.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 drivers/clk/hisilicon/clk-hi3660.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/hisilicon/clk-hi3660.c b/drivers/clk/hisilicon/clk-hi3660.c
index fd5ce7f..4e5713b 100644
--- a/drivers/clk/hisilicon/clk-hi3660.c
+++ b/drivers/clk/hisilicon/clk-hi3660.c
@@ -547,10 +547,10 @@ static void hi3660_clk_crgctrl_init(struct device_node *np)
 				  ARRAY_SIZE(hi3660_crgctrl_divider_clks),
 				  clk_data);
 }
+CLK_OF_DECLARE_DRIVER(hi3660_clk_crgctrl, "hisilicon,hi3660-crgctrl",
+		      hi3660_clk_crgctrl_init);
 
 static const struct of_device_id hi3660_clk_match_table[] = {
-	{ .compatible = "hisilicon,hi3660-crgctrl",
-	  .data = hi3660_clk_crgctrl_init },
 	{ .compatible = "hisilicon,hi3660-pctrl",
 	  .data = hi3660_clk_pctrl_init },
 	{ .compatible = "hisilicon,hi3660-pmuctrl",
-- 
1.9.1