linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jun.gao@mediatek.com (Jun Gao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/2] arm: dts: Add Mediatek MT2701 i2c device node
Date: Fri, 26 May 2017 15:35:07 +0800	[thread overview]
Message-ID: <1495784107-6711-3-git-send-email-jun.gao@mediatek.com> (raw)
In-Reply-To: <1495784107-6711-1-git-send-email-jun.gao@mediatek.com>

From: Jun Gao <jun.gao@mediatek.com>

Add MT2701 i2c device node.

Signed-off-by: Jun Gao <jun.gao@mediatek.com>
---
 arch/arm/boot/dts/mt2701-evb.dts | 42 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/mt2701.dtsi    | 42 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 84 insertions(+)

diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index a483798..3f5a96c 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -28,7 +28,49 @@
 	status = "okay";
 };
 
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
 &pio {
+	i2c0_pins_a: i2c0 at 0 {
+		pins1 {
+			pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>,
+				 <MT2701_PIN_76_SCL0__FUNC_SCL0>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_a: i2c1 at 0 {
+		pins1 {
+			pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>,
+				 <MT2701_PIN_58_SCL1__FUNC_SCL1>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_a: i2c2 at 0 {
+		pins1 {
+			pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>,
+				 <MT2701_PIN_78_SCL2__FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
 	spi_pins_a: spi0 at 0 {
 		pins_spi {
 			pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>,
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 8037210..1b6157e 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -286,6 +286,48 @@
 		status = "disabled";
 	};
 
+	i2c0: i2c at 11007000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11007000 0 0x70>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c at 11008000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11008000 0 0x70>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c at 11009000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11009000 0 0x70>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	spi0: spi at 1100a000 {
 		compatible = "mediatek,mt2701-spi";
 		#address-cells = <1>;
-- 
1.8.1.1

  parent reply	other threads:[~2017-05-26  7:35 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-26  7:35 [PATCH v4 0/2] Add i2c dt-binding and device node for Mediatek MT2701 Soc Jun Gao
2017-05-26  7:35 ` [PATCH v4 1/2] dt-bindings: i2c: Add Mediatek MT2701 i2c binding Jun Gao
2017-05-29 15:30   ` Matthias Brugger
2017-05-30 21:38     ` Rob Herring
2017-05-31  2:24       ` Jun Gao
2017-05-31 12:05         ` Matthias Brugger
2017-05-26  7:35 ` Jun Gao [this message]
2017-06-12 11:54   ` [PATCH v4 2/2] arm: dts: Add Mediatek MT2701 i2c device node Jun Gao
2017-06-13  9:36     ` Matthias Brugger
2017-06-13 10:24       ` Jun Gao
2017-06-13 12:52         ` Matthias Brugger
2017-06-13 13:23           ` Jun Gao
2017-06-13 13:45             ` Matthias Brugger
2017-06-14  1:11               ` Jun Gao
2017-06-14  9:24                 ` Matthias Brugger
2017-06-14  9:43                   ` Jun Gao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1495784107-6711-3-git-send-email-jun.gao@mediatek.com \
    --to=jun.gao@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).