linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: spjoshi@codeaurora.org (Sarangdhar Joshi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/2] remoteproc: Modify recovery path to use rproc_{start, stop}()
Date: Fri, 26 May 2017 16:51:01 -0700	[thread overview]
Message-ID: <1495842661-8926-2-git-send-email-spjoshi@codeaurora.org> (raw)
In-Reply-To: <1495842661-8926-1-git-send-email-spjoshi@codeaurora.org>

Replace rproc_shutdown() by rproc_stop() and rproc_boot() by
rproc_start() in the recovery path, in order to avoid remoteproc
resources re-allocation overhead and to assist with extracting the
coredumps after stopping the remote processor.

Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
---

Changes from v2:

* Rebase on top of v4.12-rc1

 drivers/remoteproc/remoteproc_core.c | 35 ++++++++++++++++++++++++++---------
 1 file changed, 26 insertions(+), 9 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index c8cb54b..369ba0f 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1051,23 +1051,40 @@ static int rproc_stop(struct rproc *rproc)
  */
 int rproc_trigger_recovery(struct rproc *rproc)
 {
-	dev_err(&rproc->dev, "recovering %s\n", rproc->name);
+	const struct firmware *firmware_p;
+	struct device *dev = &rproc->dev;
+	int ret;
+
+	dev_err(dev, "recovering %s\n", rproc->name);
 
 	init_completion(&rproc->crash_comp);
 
-	/* shut down the remote */
-	/* TODO: make sure this works with rproc->power > 1 */
-	rproc_shutdown(rproc);
+	ret = mutex_lock_interruptible(&rproc->lock);
+	if (ret)
+		return ret;
+
+	ret = rproc_stop(rproc);
+	if (ret)
+		goto unlock_mutex;
 
 	/* wait until there is no more rproc users */
 	wait_for_completion(&rproc->crash_comp);
 
-	/*
-	 * boot the remote processor up again
-	 */
-	rproc_boot(rproc);
+	/* load firmware */
+	ret = request_firmware(&firmware_p, rproc->firmware, dev);
+	if (ret < 0) {
+		dev_err(dev, "request_firmware failed: %d\n", ret);
+		goto unlock_mutex;
+	}
 
-	return 0;
+	/* boot the remote processor up again */
+	ret = rproc_start(rproc, firmware_p);
+
+	release_firmware(firmware_p);
+
+unlock_mutex:
+	mutex_unlock(&rproc->lock);
+	return ret;
 }
 
 /**
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply	other threads:[~2017-05-26 23:51 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-26 23:51 [PATCH v3 1/2] remoteproc: Introduce rproc_{start,stop}() functions Sarangdhar Joshi
2017-05-26 23:51 ` Sarangdhar Joshi [this message]
2017-05-27  1:12 ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1495842661-8926-2-git-send-email-spjoshi@codeaurora.org \
    --to=spjoshi@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).