From: festevam@gmail.com (Fabio Estevam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: dts: imx7d-sdb: Add Wifi support
Date: Mon, 29 May 2017 16:00:59 -0300 [thread overview]
Message-ID: <1496084460-20910-2-git-send-email-festevam@gmail.com> (raw)
In-Reply-To: <1496084460-20910-1-git-send-email-festevam@gmail.com>
From: Fabio Estevam <fabio.estevam@nxp.com>
imx7d-sdb has a BCM4339 Wifi chip connected to USDHC2.
Add support for it.
While at it, move the WL_REG_ON pin to the correct pinctrl node.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm/boot/dts/imx7d-sdb.dts | 32 +++++++++++++++++++++++++++++++-
1 file changed, 31 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 38944ca..fc7e0b0 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -105,6 +105,18 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
+ reg_brcm: regulator-brcm {
+ compatible = "regulator-fixed";
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-name = "brcm_reg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_brcm_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <200000>;
+ };
};
&adc1 {
@@ -379,6 +391,19 @@
status = "okay";
};
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ enable-sdio-wakeup;
+ keep-power-in-suspend;
+ non-removable;
+ vmmc-supply = <®_brcm>;
+ fsl,tuning-step = <2>;
+ status = "okay";
+};
+
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
@@ -403,6 +428,12 @@
pinctrl-0 = <&pinctrl_hog>;
imx7d-sdb {
+ pinctrl_brcm_reg: brcmreggrp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14
+ >;
+ };
+
pinctrl_ecspi3: ecspi3grp {
fsl,pins = <
MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2
@@ -570,7 +601,6 @@
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
- MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59 /* WL_REG_ON */
>;
};
--
2.7.4
next prev parent reply other threads:[~2017-05-29 19:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-29 19:00 [PATCH 1/3] ARM: dts: imx7d-sdb: Adjust the regulator nodes Fabio Estevam
2017-05-29 19:00 ` Fabio Estevam [this message]
2017-06-05 1:54 ` [PATCH 2/3] ARM: dts: imx7d-sdb: Add Wifi support Shawn Guo
2017-05-29 19:01 ` [PATCH 3/3] ARM: dts: imx7d-sdb: Add Bluetooth support Fabio Estevam
2017-06-05 2:02 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496084460-20910-2-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).