linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: andy.tang@nxp.com (Yuantian Tang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ahci: qoriq: add ls1088a platforms support
Date: Fri, 2 Jun 2017 15:23:03 +0800	[thread overview]
Message-ID: <1496388183-11534-1-git-send-email-andy.tang@nxp.com> (raw)

Ls1088a is new introduced arm-based soc with sata support with
following features:

* Complies with the serial ATA 3.0 specification
  and the AHCI 1.3.1 specification
* Contains a high-speed descriptor-based DMA controller
* Supports the following:
* Speeds of 1.5 Gb/s (first-generation SATA),
  3 Gb/s (second-generation SATA), and 6 Gb/s (third-generation SATA)
* FIS-based switching
* Native command queuing (NCQ) commands
* Port multiplier operation
* Asynchronous notification
* SATA Vendor BIST mode

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
---
 drivers/ata/ahci_qoriq.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index 4c96f3a..b6b0bf7 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -47,12 +47,14 @@
 
 #define SATA_ECC_DISABLE	0x00020000
 #define ECC_DIS_ARMV8_CH2	0x80000000
+#define ECC_DIS_LS1088A		0x40000000
 
 enum ahci_qoriq_type {
 	AHCI_LS1021A,
 	AHCI_LS1043A,
 	AHCI_LS2080A,
 	AHCI_LS1046A,
+	AHCI_LS1088A,
 	AHCI_LS2088A,
 };
 
@@ -68,6 +70,7 @@ static const struct of_device_id ahci_qoriq_of_match[] = {
 	{ .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A},
 	{ .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A},
 	{ .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
+	{ .compatible = "fsl,ls1088a-ahci", .data = (void *)AHCI_LS1088A},
 	{ .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A},
 	{},
 };
@@ -203,6 +206,17 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
 		break;
 
+	case AHCI_LS1088A:
+		if (!qpriv->ecc_addr)
+			return -EINVAL;
+		writel(readl(qpriv->ecc_addr) | ECC_DIS_LS1088A,
+		       qpriv->ecc_addr);
+		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		if (qpriv->is_dmacoherent)
+			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+		break;
+
 	case AHCI_LS2088A:
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
-- 
2.1.0.27.g96db324

             reply	other threads:[~2017-06-02  7:23 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-02  7:23 Yuantian Tang [this message]
2017-06-02 13:50 ` [PATCH] ahci: qoriq: add ls1088a platforms support Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1496388183-11534-1-git-send-email-andy.tang@nxp.com \
    --to=andy.tang@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).