From mboxrd@z Thu Jan 1 00:00:00 1970 From: narmstrong@baylibre.com (Neil Armstrong) Date: Thu, 8 Jun 2017 17:31:23 +0200 Subject: [PATCH 4/4] ARM64: dts: meson-gxl-s905x-p212: Add HDMI and CVBS nodes In-Reply-To: <1496935883-4966-1-git-send-email-narmstrong@baylibre.com> References: <1496935883-4966-1-git-send-email-narmstrong@baylibre.com> Message-ID: <1496935883-4966-5-git-send-email-narmstrong@baylibre.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add HDMI and CVBS nodes for the Amlogic P212 reference board. Signed-off-by: Neil Armstrong --- .../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts index db31e09..6ab17c1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts @@ -58,6 +58,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; &cvbs_vdac_port { @@ -66,6 +77,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + /* This UART is brought out to the DB9 connector */ &uart_AO { status = "okay"; -- 1.9.1