From: aisheng.dong@nxp.com (Dong Aisheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 1/2] dt-bindings: timer: add nxp tpm timer binding doc
Date: Tue, 13 Jun 2017 15:58:44 +0800 [thread overview]
Message-ID: <1497340725-26594-2-git-send-email-aisheng.dong@nxp.com> (raw)
In-Reply-To: <1497340725-26594-1-git-send-email-aisheng.dong@nxp.com>
Adding NXP Low Power Timer/Pulse Width Modulation Module (TPM)
binding doc.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree at vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Bai Ping <ping.bai@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v1->v2:
* No changes
---
.../devicetree/bindings/timer/nxp,tpm-timer.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
new file mode 100644
index 0000000..b4aa7dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
@@ -0,0 +1,28 @@
+NXP Low Power Timer/Pulse Width Modulation Module (TPM)
+
+The Timer/PWM Module (TPM) supports input capture, output compare,
+and the generation of PWM signals to control electric motor and power
+management applications. The counter, compare and capture registers
+are clocked by an asynchronous clock that can remain enabled in low
+power modes. TPM can support global counter bus where one TPM drives
+the counter bus for the others, provided bit width is the same.
+
+Required properties:
+
+- compatible : should be "fsl,imx7ulp-tpm"
+- reg : Specifies base physical address and size of the register sets
+ for the clock event device and clock source device.
+- interrupts : Should be the clock event device interrupt.
+- clocks : The clocks provided by the SoC to drive the timer, must contain
+ an entry for each entry in clock-names.
+- clock-names : Must include the following entries: "igp" and "per".
+
+Example:
+tpm5: tpm at 40260000 {
+ compatible = "fsl,imx7ulp-tpm";
+ reg = <0x40260000 0x1000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
+ <&clks IMX7ULP_CLK_LPTPM5>;
+ clock-names = "ipg", "per";
+};
--
2.7.4
next prev parent reply other threads:[~2017-06-13 7:58 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-13 7:58 [PATCH V2 0/2] timer: add imx tpm timer support Dong Aisheng
2017-06-13 7:58 ` Dong Aisheng [this message]
2017-06-13 7:58 ` [PATCH V2 2/2] timer: imx-tpm: " Dong Aisheng
2017-06-13 8:19 ` Alexander Stein
2017-06-19 15:36 ` Dong Aisheng
2017-06-13 13:54 ` Daniel Lezcano
2017-06-19 15:34 ` Dong Aisheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1497340725-26594-2-git-send-email-aisheng.dong@nxp.com \
--to=aisheng.dong@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).