[PATCH 1/3] arm: dts: mt2701: Add ethernet device node

[sean.wang@mediatek.com (Sean Wang)]

On Fri, 2017-06-09 at 10:22 +0200, Matthias Brugger wrote:
> 
> On 01/06/17 08:08, Erin Lo wrote:
> > From: Sean Wang <sean.wang@mediatek.com>
> > 
> > Add ethernet device node for MT2701
> > 
> > Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> > Signed-off-by: Erin Lo <erin.lo@mediatek.com>
> > ---
> >   arch/arm/boot/dts/mt2701.dtsi | 20 ++++++++++++++++++++
> >   1 file changed, 20 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
> > index 8037210..de88bd7 100644
> > --- a/arch/arm/boot/dts/mt2701.dtsi
> > +++ b/arch/arm/boot/dts/mt2701.dtsi
> > @@ -420,6 +420,26 @@
> >   		#clock-cells = <1>;
> >   	};
> >   
> > +	eth: ethernet at 1b100000 {
> > +		compatible = "mediatek,mt2701-eth", "syscon";
> > +		reg = <0 0x1b100000 0 0x20000>;
> > +		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
> > +			     <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
> > +			     <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
> > +			 <&ethsys CLK_ETHSYS_ESW>,
> > +			 <&ethsys CLK_ETHSYS_GP1>,
> > +			 <&ethsys CLK_ETHSYS_GP2>,
> > +			 <&apmixedsys CLK_APMIXED_TRGPLL>;
> > +		clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
> > +		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
> > +		mediatek,ethsys = <&ethsys>;
> > +		mediatek,pctl = <&syscfg_pctl_a>;
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +		status = "disabled";
> > +	};
> > +
> 
> I'm missing the reset properties.


Hi Matthias,

Appreciate your careful reviewing, 

I'll add it for the missing which causes binding violation. 


	Sean

> 
> Regards,
> Matthias