linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: yt.shen@mediatek.com (YT Shen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] arm: dts: mt2701: Add display subsystem related nodes for MT2701
Date: Fri, 16 Jun 2017 21:54:25 +0800	[thread overview]
Message-ID: <1497621265.29558.1.camel@mtksdaap41> (raw)
In-Reply-To: <dc75371a-b9f4-9393-4c09-0a07d20ee169@gmail.com>

On Mon, 2017-06-12 at 11:13 +0200, Matthias Brugger wrote:
> 
> On 01/06/17 08:08, Erin Lo wrote:
> > From: YT Shen <yt.shen@mediatek.com>
> > 
> > This patch adds the device nodes for the DISP function blocks for MT2701
> > 
> > Signed-off-by: YT Shen <yt.shen@mediatek.com>
> > Signed-off-by: Erin Lo <erin.lo@mediatek.com>
> > ---
> >   arch/arm/boot/dts/mt2701.dtsi | 84 +++++++++++++++++++++++++++++++++++++++++++
> >   1 file changed, 84 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
> > index 4f110d5..e20b65c 100644
> > --- a/arch/arm/boot/dts/mt2701.dtsi
> > +++ b/arch/arm/boot/dts/mt2701.dtsi
> > @@ -17,6 +17,7 @@
> >   #include <dt-bindings/interrupt-controller/irq.h>
> >   #include <dt-bindings/interrupt-controller/arm-gic.h>
> >   #include <dt-bindings/reset/mt2701-resets.h>
> > +#include <dt-bindings/memory/mt2701-larb-port.h>
> >   #include "skeleton64.dtsi"
> >   #include "mt2701-pinfunc.h"
> >   
> > @@ -24,6 +25,11 @@
> >   	compatible = "mediatek,mt2701";
> >   	interrupt-parent = <&sysirq>;
> >   
> > +	aliases {
> > +		rdma0 = &rdma0;
> > +		rdma1 = &rdma1;
> > +	};
> > +
> >   	cpus {
> >   		#address-cells = <1>;
> >   		#size-cells = <0>;
> > @@ -201,6 +207,16 @@
> >   		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> >   	};
> >   
> > +	mipi_tx0: mipi-dphy at 10010000 {
> > +		compatible = "mediatek,mt2701-mipi-tx";
> > +		reg = <0 0x10010000 0 0x90>;
> > +		clocks = <&clk26m>;
> > +		clock-output-names = "mipi_tx0_pll";
> > +		#clock-cells = <0>;
> > +		#phy-cells = <0>;
> > +		status = "disabled";
> > +	};
> > +
> >   	sysirq: interrupt-controller at 10200100 {
> >   		compatible = "mediatek,mt2701-sysirq",
> >   			     "mediatek,mt6577-sysirq";
> > @@ -366,6 +382,39 @@
> >   		#clock-cells = <1>;
> >   	};
> >   
> > +	display_components: dispsys at 14000000 {
> > +		compatible = "mediatek,mt2701-mmsys";
> > +		reg = <0 0x14000000 0 0x1000>;
> > +		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> > +	};
> 
> Can you please rebase on a recent kernel version. mt2701-mmsys node is 
> already present.
> 
> Thanks,
> Matthias
OK, we will rebase the mt2701 device tree in the next version.
Thanks.

yt.shen

> 
> > +
> > +	ovl at 14007000 {
> > +		compatible = "mediatek,mt2701-disp-ovl";
> > +		reg = <0 0x14007000 0 0x1000>;
> > +		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&mmsys CLK_MM_DISP_OVL>;
> > +		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
> > +		mediatek,larb = <&larb0>;
> > +	};
> > +
> > +	rdma0: rdma at 14008000 {
> > +		compatible = "mediatek,mt2701-disp-rdma";
> > +		reg = <0 0x14008000 0 0x1000>;
> > +		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&mmsys CLK_MM_DISP_RDMA>;
> > +		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
> > +		mediatek,larb = <&larb0>;
> > +	};
> > +
> > +	wdma at 14009000 {
> > +		compatible = "mediatek,mt2701-disp-wdma";
> > +		reg = <0 0x14009000 0 0x1000>;
> > +		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&mmsys CLK_MM_DISP_WDMA>;
> > +		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
> > +		mediatek,larb = <&larb0>;
> > +	};
> > +
> >   	bls: bls at 1400a000 {
> >   		compatible = "mediatek,mt2701-disp-pwm";
> >   		reg = <0 0x1400a000 0 0x1000>;
> > @@ -375,6 +424,32 @@
> >   		status = "disabled";
> >   	};
> >   
> > +	color at 1400b000 {
> > +		compatible = "mediatek,mt2701-disp-color";
> > +		reg = <0 0x1400b000 0 0x1000>;
> > +		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&mmsys CLK_MM_DISP_COLOR>;
> > +	};
> > +
> > +	dsi: dsi at 1400c000 {
> > +		compatible = "mediatek,mt2701-dsi";
> > +		reg = <0 0x1400c000 0 0x1000>;
> > +		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&mmsys CLK_MM_DSI_ENGINE>, <&mmsys CLK_MM_DSI_DIG>,
> > +			 <&mipi_tx0>;
> > +		clock-names = "engine", "digital", "hs";
> > +		phys = <&mipi_tx0>;
> > +		phy-names = "dphy";
> > +		status = "disabled";
> > +	};
> > +
> > +	mutex: mutex at 1400e000 {
> > +		compatible = "mediatek,mt2701-disp-mutex";
> > +		reg = <0 0x1400e000 0 0x1000>;
> > +		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&mmsys CLK_MM_MUTEX_32K>;
> > +	};
> > +
> >   	larb0: larb at 14010000 {
> >   		compatible = "mediatek,mt2701-smi-larb";
> >   		reg = <0 0x14010000 0 0x1000>;
> > @@ -385,6 +460,15 @@
> >   		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> >   	};
> >   
> > +	rdma1: rdma at 14012000 {
> > +		compatible = "mediatek,mt2701-disp-rdma";
> > +		reg = <0 0x14012000 0 0x1000>;
> > +		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
> > +		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> > +		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
> > +		mediatek,larb = <&larb0>;
> > +	};
> > +
> >   	imgsys: syscon at 15000000 {
> >   		compatible = "mediatek,mt2701-imgsys", "syscon";
> >   		reg = <0 0x15000000 0 0x1000>;
> > 

      reply	other threads:[~2017-06-16 13:54 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-01  6:08 [PATCH 0/3] Add some DT nodes for Mediatek MT2701 Erin Lo
2017-06-01  6:08 ` [PATCH 1/3] arm: dts: mt2701: Add ethernet device node Erin Lo
2017-06-09  8:22   ` Matthias Brugger
2017-06-14  3:08     ` Sean Wang
2017-06-01  6:08 ` [PATCH 2/3] arm: dts: mt2701: Add display bls related nodes for MT2701 Erin Lo
2017-06-09  8:12   ` Matthias Brugger
2017-06-15  5:34     ` Weiqing Kong
2017-06-01  6:08 ` [PATCH 3/3] arm: dts: mt2701: Add display subsystem " Erin Lo
2017-06-09  8:14   ` Matthias Brugger
2017-06-09  8:22     ` Philipp Zabel
2017-06-09 10:59       ` Matthias Brugger
2017-06-12  9:13   ` Matthias Brugger
2017-06-16 13:54     ` YT Shen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1497621265.29558.1.camel@mtksdaap41 \
    --to=yt.shen@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).