* [PATCH v2 0/2] Add ZTE zx-aud96p22 audio codec driver @ 2017-06-22 6:51 Shawn Guo 2017-06-22 6:51 ` [PATCH v2 1/2] ASoC: add bindings for ZTE zx-aud96p22 audio codec Shawn Guo 2017-06-22 6:51 ` [PATCH v2 2/2] ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver Shawn Guo 0 siblings, 2 replies; 5+ messages in thread From: Shawn Guo @ 2017-06-22 6:51 UTC (permalink / raw) To: linux-arm-kernel From: Shawn Guo <shawn.guo@linaro.org> It adds the ASoC driver for zx-aud96p22 audio codec found on ZTE ZX family SoCs. Changes for v2: - Follow document control-names.rst to name controls in a standard way, so that user space mixer UIs know what to do with them. - Drop the GPIO support for an optional external amplifier, as it belongs to machine driver rather than codec driver. - Support overall power bit with a DAPM supply widget and attach it to both DAC and ADC components. - Instead of reset DAC/ADC data path in startup/shutdown hooks, handle it with DAPM event, so that startup/shutdown hooks get dropped completely. Baoyou Xie (2): ASoC: add bindings for ZTE zx-aud96p22 audio codec ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver .../devicetree/bindings/sound/zte,zx-aud96p22.txt | 24 ++ sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/zx_aud96p22.c | 403 +++++++++++++++++++++ 4 files changed, 434 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt create mode 100644 sound/soc/codecs/zx_aud96p22.c -- 1.9.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2 1/2] ASoC: add bindings for ZTE zx-aud96p22 audio codec 2017-06-22 6:51 [PATCH v2 0/2] Add ZTE zx-aud96p22 audio codec driver Shawn Guo @ 2017-06-22 6:51 ` Shawn Guo 2017-06-23 12:04 ` Applied "ASoC: add bindings for ZTE zx-aud96p22 audio codec" to the asoc tree Mark Brown 2017-06-22 6:51 ` [PATCH v2 2/2] ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver Shawn Guo 1 sibling, 1 reply; 5+ messages in thread From: Shawn Guo @ 2017-06-22 6:51 UTC (permalink / raw) To: linux-arm-kernel From: Baoyou Xie <baoyou.xie@linaro.org> It adds dt-bindings document for ZTE zx-aud96p22 audio codec. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- .../devicetree/bindings/sound/zte,zx-aud96p22.txt | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt diff --git a/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt b/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt new file mode 100644 index 000000000000..41bb1040eb71 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt @@ -0,0 +1,24 @@ +ZTE ZX AUD96P22 Audio Codec + +Required properties: + - compatible: Must be "zte,zx-aud96p22" + - #sound-dai-cells: Should be 0 + - reg: I2C bus slave address of AUD96P22 + +Example: + + i2c0: i2c at 1486000 { + compatible = "zte,zx296718-i2c"; + reg = <0x01486000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&audiocrm AUDIO_I2C0_WCLK>; + clock-frequency = <1600000>; + + aud96p22: codec at 22 { + compatible = "zte,zx-aud96p22"; + #sound-dai-cells = <0>; + reg = <0x22>; + }; + }; -- 1.9.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Applied "ASoC: add bindings for ZTE zx-aud96p22 audio codec" to the asoc tree 2017-06-22 6:51 ` [PATCH v2 1/2] ASoC: add bindings for ZTE zx-aud96p22 audio codec Shawn Guo @ 2017-06-23 12:04 ` Mark Brown 0 siblings, 0 replies; 5+ messages in thread From: Mark Brown @ 2017-06-23 12:04 UTC (permalink / raw) To: linux-arm-kernel The patch ASoC: add bindings for ZTE zx-aud96p22 audio codec has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 7de35c122e2dd8dc4d74b3782ced9c03115dc268 Mon Sep 17 00:00:00 2001 From: Baoyou Xie <baoyou.xie@linaro.org> Date: Thu, 22 Jun 2017 14:51:57 +0800 Subject: [PATCH] ASoC: add bindings for ZTE zx-aud96p22 audio codec It adds dt-bindings document for ZTE zx-aud96p22 audio codec. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> --- .../devicetree/bindings/sound/zte,zx-aud96p22.txt | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt diff --git a/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt b/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt new file mode 100644 index 000000000000..41bb1040eb71 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt @@ -0,0 +1,24 @@ +ZTE ZX AUD96P22 Audio Codec + +Required properties: + - compatible: Must be "zte,zx-aud96p22" + - #sound-dai-cells: Should be 0 + - reg: I2C bus slave address of AUD96P22 + +Example: + + i2c0: i2c at 1486000 { + compatible = "zte,zx296718-i2c"; + reg = <0x01486000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&audiocrm AUDIO_I2C0_WCLK>; + clock-frequency = <1600000>; + + aud96p22: codec at 22 { + compatible = "zte,zx-aud96p22"; + #sound-dai-cells = <0>; + reg = <0x22>; + }; + }; -- 2.13.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 2/2] ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver 2017-06-22 6:51 [PATCH v2 0/2] Add ZTE zx-aud96p22 audio codec driver Shawn Guo 2017-06-22 6:51 ` [PATCH v2 1/2] ASoC: add bindings for ZTE zx-aud96p22 audio codec Shawn Guo @ 2017-06-22 6:51 ` Shawn Guo 2017-06-23 12:04 ` Applied "ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver" to the asoc tree Mark Brown 1 sibling, 1 reply; 5+ messages in thread From: Shawn Guo @ 2017-06-22 6:51 UTC (permalink / raw) To: linux-arm-kernel From: Baoyou Xie <baoyou.xie@linaro.org> It adds ASoC driver for AUD96P22 stereo audio codec integrated on ZTE ZX family SoCs. The driver includes the support for a number of volume and mute controls, and power bits for various playback and recording components. Due to that the board for testing only supports playback, recording support is untested. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/zx_aud96p22.c | 403 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 410 insertions(+) create mode 100644 sound/soc/codecs/zx_aud96p22.c diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index c6286e5ba511..08f7b0861bc1 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1118,6 +1118,11 @@ config SND_SOC_WM9713 tristate select REGMAP_AC97 +config SND_SOC_ZX_AUD96P22 + tristate "ZTE ZX AUD96P22 CODEC" + depends on I2C + select REGMAP_I2C + # Amp config SND_SOC_LM4857 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index e878306ce46e..1755a54e3dc9 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -225,6 +225,7 @@ snd-soc-wm9705-objs := wm9705.o snd-soc-wm9712-objs := wm9712.o snd-soc-wm9713-objs := wm9713.o snd-soc-wm-hubs-objs := wm_hubs.o +snd-soc-zx-aud96p22-objs := zx_aud96p22.o # Amp snd-soc-dio2125-objs := dio2125.o snd-soc-max9877-objs := max9877.o @@ -457,6 +458,7 @@ obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o obj-$(CONFIG_SND_SOC_WM_ADSP) += snd-soc-wm-adsp.o obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o +obj-$(CONFIG_SND_SOC_ZX_AUD96P22) += snd-soc-zx-aud96p22.o # Amp obj-$(CONFIG_SND_SOC_DIO2125) += snd-soc-dio2125.o diff --git a/sound/soc/codecs/zx_aud96p22.c b/sound/soc/codecs/zx_aud96p22.c new file mode 100644 index 000000000000..032fb7cf6cbd --- /dev/null +++ b/sound/soc/codecs/zx_aud96p22.c @@ -0,0 +1,403 @@ +/* + * Copyright (C) 2017 Sanechips Technology Co., Ltd. + * Copyright 2017 Linaro Ltd. + * + * Author: Baoyou Xie <baoyou.xie@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dai.h> +#include <sound/tlv.h> + +#define AUD96P22_RESET 0x00 +#define RST_DAC_DPZ BIT(0) +#define RST_ADC_DPZ BIT(1) +#define AUD96P22_I2S1_CONFIG_0 0x03 +#define I2S1_MS_MODE BIT(3) +#define I2S1_MODE_MASK 0x7 +#define I2S1_MODE_RIGHT_J 0x0 +#define I2S1_MODE_I2S 0x1 +#define I2S1_MODE_LEFT_J 0x2 +#define AUD96P22_PD_0 0x15 +#define AUD96P22_PD_1 0x16 +#define AUD96P22_PD_3 0x18 +#define AUD96P22_PD_4 0x19 +#define AUD96P22_MUTE_0 0x1d +#define AUD96P22_MUTE_2 0x1f +#define AUD96P22_MUTE_4 0x21 +#define AUD96P22_RECVOL_0 0x24 +#define AUD96P22_RECVOL_1 0x25 +#define AUD96P22_PGA1VOL_0 0x26 +#define AUD96P22_PGA1VOL_1 0x27 +#define AUD96P22_LMVOL_0 0x34 +#define AUD96P22_LMVOL_1 0x35 +#define AUD96P22_HS1VOL_0 0x38 +#define AUD96P22_HS1VOL_1 0x39 +#define AUD96P22_PGA1SEL_0 0x47 +#define AUD96P22_PGA1SEL_1 0x48 +#define AUD96P22_LDR1SEL_0 0x59 +#define AUD96P22_LDR1SEL_1 0x60 +#define AUD96P22_LDR2SEL_0 0x5d +#define AUD96P22_REG_MAX 0xfb + +struct aud96p22_priv { + struct regmap *regmap; +}; + +static int aud96p22_adc_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + struct aud96p22_priv *priv = snd_soc_codec_get_drvdata(codec); + struct regmap *regmap = priv->regmap; + + if (event != SND_SOC_DAPM_POST_PMU) + return -EINVAL; + + /* Assert/de-assert the bit to reset ADC data path */ + regmap_update_bits(regmap, AUD96P22_RESET, RST_ADC_DPZ, 0); + regmap_update_bits(regmap, AUD96P22_RESET, RST_ADC_DPZ, RST_ADC_DPZ); + + return 0; +} + +static int aud96p22_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + struct aud96p22_priv *priv = snd_soc_codec_get_drvdata(codec); + struct regmap *regmap = priv->regmap; + + if (event != SND_SOC_DAPM_POST_PMU) + return -EINVAL; + + /* Assert/de-assert the bit to reset DAC data path */ + regmap_update_bits(regmap, AUD96P22_RESET, RST_DAC_DPZ, 0); + regmap_update_bits(regmap, AUD96P22_RESET, RST_DAC_DPZ, RST_DAC_DPZ); + + return 0; +} + +static const DECLARE_TLV_DB_SCALE(lm_tlv, -11550, 50, 0); +static const DECLARE_TLV_DB_SCALE(hs_tlv, -3900, 300, 0); +static const DECLARE_TLV_DB_SCALE(rec_tlv, -9550, 50, 0); +static const DECLARE_TLV_DB_SCALE(pga_tlv, -1800, 100, 0); + +static const struct snd_kcontrol_new aud96p22_snd_controls[] = { + /* Volume control */ + SOC_DOUBLE_R_TLV("Master Playback Volume", AUD96P22_LMVOL_0, + AUD96P22_LMVOL_1, 0, 0xff, 0, lm_tlv), + SOC_DOUBLE_R_TLV("Headphone Volume", AUD96P22_HS1VOL_0, + AUD96P22_HS1VOL_1, 0, 0xf, 0, hs_tlv), + SOC_DOUBLE_R_TLV("Master Capture Volume", AUD96P22_RECVOL_0, + AUD96P22_RECVOL_1, 0, 0xff, 0, rec_tlv), + SOC_DOUBLE_R_TLV("Analogue Capture Volume", AUD96P22_PGA1VOL_0, + AUD96P22_PGA1VOL_1, 0, 0x37, 0, pga_tlv), + + /* Mute control */ + SOC_DOUBLE("Master Playback Switch", AUD96P22_MUTE_2, 0, 1, 1, 1), + SOC_DOUBLE("Headphone Switch", AUD96P22_MUTE_2, 4, 5, 1, 1), + SOC_DOUBLE("Line Out Switch", AUD96P22_MUTE_4, 0, 1, 1, 1), + SOC_DOUBLE("Speaker Switch", AUD96P22_MUTE_4, 2, 3, 1, 1), + SOC_DOUBLE("Master Capture Switch", AUD96P22_MUTE_0, 0, 1, 1, 1), + SOC_DOUBLE("Analogue Capture Switch", AUD96P22_MUTE_0, 2, 3, 1, 1), +}; + +/* Input mux kcontrols */ +static const unsigned int ain_mux_values[] = { + 0, 1, 3, 4, 5, +}; + +static const char * const ainl_mux_texts[] = { + "AINL1 differential", + "AINL1 single-ended", + "AINL3 single-ended", + "AINL2 differential", + "AINL2 single-ended", +}; + +static const char * const ainr_mux_texts[] = { + "AINR1 differential", + "AINR1 single-ended", + "AINR3 single-ended", + "AINR2 differential", + "AINR2 single-ended", +}; + +static SOC_VALUE_ENUM_SINGLE_DECL(ainl_mux_enum, AUD96P22_PGA1SEL_0, + 0, 0x7, ainl_mux_texts, ain_mux_values); +static SOC_VALUE_ENUM_SINGLE_DECL(ainr_mux_enum, AUD96P22_PGA1SEL_1, + 0, 0x7, ainr_mux_texts, ain_mux_values); + +static const struct snd_kcontrol_new ainl_mux_kcontrol = + SOC_DAPM_ENUM("AINL Mux", ainl_mux_enum); +static const struct snd_kcontrol_new ainr_mux_kcontrol = + SOC_DAPM_ENUM("AINR Mux", ainr_mux_enum); + +/* Output mixer kcontrols */ +static const struct snd_kcontrol_new ld1_left_kcontrols[] = { + SOC_DAPM_SINGLE("DACL LD1L Switch", AUD96P22_LDR1SEL_0, 0, 1, 0), + SOC_DAPM_SINGLE("AINL LD1L Switch", AUD96P22_LDR1SEL_0, 1, 1, 0), + SOC_DAPM_SINGLE("AINR LD1L Switch", AUD96P22_LDR1SEL_0, 2, 1, 0), +}; + +static const struct snd_kcontrol_new ld1_right_kcontrols[] = { + SOC_DAPM_SINGLE("DACR LD1R Switch", AUD96P22_LDR1SEL_1, 8, 1, 0), + SOC_DAPM_SINGLE("AINR LD1R Switch", AUD96P22_LDR1SEL_1, 9, 1, 0), + SOC_DAPM_SINGLE("AINL LD1R Switch", AUD96P22_LDR1SEL_1, 10, 1, 0), +}; + +static const struct snd_kcontrol_new ld2_kcontrols[] = { + SOC_DAPM_SINGLE("DACL LD2 Switch", AUD96P22_LDR2SEL_0, 0, 1, 0), + SOC_DAPM_SINGLE("AINL LD2 Switch", AUD96P22_LDR2SEL_0, 1, 1, 0), + SOC_DAPM_SINGLE("DACR LD2 Switch", AUD96P22_LDR2SEL_0, 2, 1, 0), +}; + +static const struct snd_soc_dapm_widget aud96p22_dapm_widgets[] = { + /* Overall power bit */ + SND_SOC_DAPM_SUPPLY("POWER", AUD96P22_PD_0, 0, 0, NULL, 0), + + /* Input pins */ + SND_SOC_DAPM_INPUT("AINL1P"), + SND_SOC_DAPM_INPUT("AINL2P"), + SND_SOC_DAPM_INPUT("AINL3"), + SND_SOC_DAPM_INPUT("AINL1N"), + SND_SOC_DAPM_INPUT("AINL2N"), + SND_SOC_DAPM_INPUT("AINR2N"), + SND_SOC_DAPM_INPUT("AINR1N"), + SND_SOC_DAPM_INPUT("AINR3"), + SND_SOC_DAPM_INPUT("AINR2P"), + SND_SOC_DAPM_INPUT("AINR1P"), + + /* Input muxes */ + SND_SOC_DAPM_MUX("AINLMUX", AUD96P22_PD_1, 2, 0, &ainl_mux_kcontrol), + SND_SOC_DAPM_MUX("AINRMUX", AUD96P22_PD_1, 3, 0, &ainr_mux_kcontrol), + + /* ADCs */ + SND_SOC_DAPM_ADC_E("ADCL", "Capture Left", AUD96P22_PD_1, 0, 0, + aud96p22_adc_event, SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_ADC_E("ADCR", "Capture Right", AUD96P22_PD_1, 1, 0, + aud96p22_adc_event, SND_SOC_DAPM_POST_PMU), + + /* DACs */ + SND_SOC_DAPM_DAC_E("DACL", "Playback Left", AUD96P22_PD_3, 0, 0, + aud96p22_dac_event, SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_DAC_E("DACR", "Playback Right", AUD96P22_PD_3, 1, 0, + aud96p22_dac_event, SND_SOC_DAPM_POST_PMU), + + /* Output mixers */ + SND_SOC_DAPM_MIXER("LD1L", AUD96P22_PD_3, 6, 0, ld1_left_kcontrols, + ARRAY_SIZE(ld1_left_kcontrols)), + SND_SOC_DAPM_MIXER("LD1R", AUD96P22_PD_3, 7, 0, ld1_right_kcontrols, + ARRAY_SIZE(ld1_right_kcontrols)), + SND_SOC_DAPM_MIXER("LD2", AUD96P22_PD_4, 2, 0, ld2_kcontrols, + ARRAY_SIZE(ld2_kcontrols)), + + /* Headset power switch */ + SND_SOC_DAPM_SUPPLY("HS1L", AUD96P22_PD_3, 4, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("HS1R", AUD96P22_PD_3, 5, 0, NULL, 0), + + /* Output pins */ + SND_SOC_DAPM_OUTPUT("HSOUTL"), + SND_SOC_DAPM_OUTPUT("LINEOUTL"), + SND_SOC_DAPM_OUTPUT("LINEOUTMP"), + SND_SOC_DAPM_OUTPUT("LINEOUTMN"), + SND_SOC_DAPM_OUTPUT("LINEOUTR"), + SND_SOC_DAPM_OUTPUT("HSOUTR"), +}; + +static const struct snd_soc_dapm_route aud96p22_dapm_routes[] = { + { "AINLMUX", "AINL1 differential", "AINL1N" }, + { "AINLMUX", "AINL1 single-ended", "AINL1P" }, + { "AINLMUX", "AINL3 single-ended", "AINL3" }, + { "AINLMUX", "AINL2 differential", "AINL2N" }, + { "AINLMUX", "AINL2 single-ended", "AINL2P" }, + + { "AINRMUX", "AINR1 differential", "AINR1N" }, + { "AINRMUX", "AINR1 single-ended", "AINR1P" }, + { "AINRMUX", "AINR3 single-ended", "AINR3" }, + { "AINRMUX", "AINR2 differential", "AINR2N" }, + { "AINRMUX", "AINR2 single-ended", "AINR2P" }, + + { "ADCL", NULL, "AINLMUX" }, + { "ADCR", NULL, "AINRMUX" }, + + { "ADCL", NULL, "POWER" }, + { "ADCR", NULL, "POWER" }, + { "DACL", NULL, "POWER" }, + { "DACR", NULL, "POWER" }, + + { "LD1L", "DACL LD1L Switch", "DACL" }, + { "LD1L", "AINL LD1L Switch", "AINLMUX" }, + { "LD1L", "AINR LD1L Switch", "AINRMUX" }, + + { "LD1R", "DACR LD1R Switch", "DACR" }, + { "LD1R", "AINR LD1R Switch", "AINRMUX" }, + { "LD1R", "AINL LD1R Switch", "AINLMUX" }, + + { "LD2", "DACL LD2 Switch", "DACL" }, + { "LD2", "AINL LD2 Switch", "AINLMUX" }, + { "LD2", "DACR LD2 Switch", "DACR" }, + + { "HSOUTL", NULL, "LD1L" }, + { "HSOUTR", NULL, "LD1R" }, + { "HSOUTL", NULL, "HS1L" }, + { "HSOUTR", NULL, "HS1R" }, + + { "LINEOUTL", NULL, "LD1L" }, + { "LINEOUTR", NULL, "LD1R" }, + + { "LINEOUTMP", NULL, "LD2" }, + { "LINEOUTMN", NULL, "LD2" }, +}; + +static struct snd_soc_codec_driver aud96p22_driver = { + .component_driver = { + .controls = aud96p22_snd_controls, + .num_controls = ARRAY_SIZE(aud96p22_snd_controls), + .dapm_widgets = aud96p22_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(aud96p22_dapm_widgets), + .dapm_routes = aud96p22_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(aud96p22_dapm_routes), + }, +}; + +static int aud96p22_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct aud96p22_priv *priv = snd_soc_codec_get_drvdata(dai->codec); + struct regmap *regmap = priv->regmap; + unsigned int val; + + /* Master/slave mode */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + val = 0; + break; + case SND_SOC_DAIFMT_CBM_CFM: + val = I2S1_MS_MODE; + break; + default: + return -EINVAL; + } + + regmap_update_bits(regmap, AUD96P22_I2S1_CONFIG_0, I2S1_MS_MODE, val); + + /* Audio format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_RIGHT_J: + val = I2S1_MODE_RIGHT_J; + break; + case SND_SOC_DAIFMT_I2S: + val = I2S1_MODE_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + val = I2S1_MODE_LEFT_J; + break; + default: + return -EINVAL; + } + + regmap_update_bits(regmap, AUD96P22_I2S1_CONFIG_0, I2S1_MODE_MASK, val); + + return 0; +} + +static struct snd_soc_dai_ops aud96p22_dai_ops = { + .set_fmt = aud96p22_set_fmt, +}; + +#define AUD96P22_RATES SNDRV_PCM_RATE_8000_192000 +#define AUD96P22_FORMATS (\ + SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S18_3LE | \ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE) + +static struct snd_soc_dai_driver aud96p22_dai = { + .name = "aud96p22-dai", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = AUD96P22_RATES, + .formats = AUD96P22_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = AUD96P22_RATES, + .formats = AUD96P22_FORMATS, + }, + .ops = &aud96p22_dai_ops, +}; + +static const struct regmap_config aud96p22_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = AUD96P22_REG_MAX, + .cache_type = REGCACHE_RBTREE, +}; + +static int aud96p22_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c->dev; + struct aud96p22_priv *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (priv == NULL) + return -ENOMEM; + + priv->regmap = devm_regmap_init_i2c(i2c, &aud96p22_regmap); + if (IS_ERR(priv->regmap)) { + ret = PTR_ERR(priv->regmap); + dev_err(dev, "failed to init i2c regmap: %d\n", ret); + return ret; + } + + i2c_set_clientdata(i2c, priv); + + ret = snd_soc_register_codec(dev, &aud96p22_driver, &aud96p22_dai, 1); + if (ret) { + dev_err(dev, "failed to register codec: %d\n", ret); + return ret; + } + + return 0; +} + +static int aud96p22_i2c_remove(struct i2c_client *i2c) +{ + snd_soc_unregister_codec(&i2c->dev); + return 0; +} + +const struct of_device_id aud96p22_dt_ids[] = { + { .compatible = "zte,zx-aud96p22", }, + { } +}; +MODULE_DEVICE_TABLE(of, aud96p22_dt_ids); + +static struct i2c_driver aud96p22_i2c_driver = { + .driver = { + .name = "zx_aud96p22", + .of_match_table = aud96p22_dt_ids, + }, + .probe = aud96p22_i2c_probe, + .remove = aud96p22_i2c_remove, +}; +module_i2c_driver(aud96p22_i2c_driver); + +MODULE_DESCRIPTION("ZTE ASoC AUD96P22 CODEC driver"); +MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>"); +MODULE_LICENSE("GPL v2"); -- 1.9.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Applied "ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver" to the asoc tree 2017-06-22 6:51 ` [PATCH v2 2/2] ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver Shawn Guo @ 2017-06-23 12:04 ` Mark Brown 0 siblings, 0 replies; 5+ messages in thread From: Mark Brown @ 2017-06-23 12:04 UTC (permalink / raw) To: linux-arm-kernel The patch ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 0e15bdfd8b1e3a94862522580161a2d1bb3882a7 Mon Sep 17 00:00:00 2001 From: Baoyou Xie <baoyou.xie@linaro.org> Date: Thu, 22 Jun 2017 14:51:58 +0800 Subject: [PATCH] ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver It adds ASoC driver for AUD96P22 stereo audio codec integrated on ZTE ZX family SoCs. The driver includes the support for a number of volume and mute controls, and power bits for various playback and recording components. Due to that the board for testing only supports playback, recording support is untested. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> --- sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/zx_aud96p22.c | 403 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 410 insertions(+) create mode 100644 sound/soc/codecs/zx_aud96p22.c diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 883ed4c8a551..3425bbcea2d1 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1114,6 +1114,11 @@ config SND_SOC_WM9713 tristate select REGMAP_AC97 +config SND_SOC_ZX_AUD96P22 + tristate "ZTE ZX AUD96P22 CODEC" + depends on I2C + select REGMAP_I2C + # Amp config SND_SOC_LM4857 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 28a63fdaf982..d9858be7796a 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -224,6 +224,7 @@ snd-soc-wm9705-objs := wm9705.o snd-soc-wm9712-objs := wm9712.o snd-soc-wm9713-objs := wm9713.o snd-soc-wm-hubs-objs := wm_hubs.o +snd-soc-zx-aud96p22-objs := zx_aud96p22.o # Amp snd-soc-dio2125-objs := dio2125.o snd-soc-max9877-objs := max9877.o @@ -455,6 +456,7 @@ obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o obj-$(CONFIG_SND_SOC_WM_ADSP) += snd-soc-wm-adsp.o obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o +obj-$(CONFIG_SND_SOC_ZX_AUD96P22) += snd-soc-zx-aud96p22.o # Amp obj-$(CONFIG_SND_SOC_DIO2125) += snd-soc-dio2125.o diff --git a/sound/soc/codecs/zx_aud96p22.c b/sound/soc/codecs/zx_aud96p22.c new file mode 100644 index 000000000000..032fb7cf6cbd --- /dev/null +++ b/sound/soc/codecs/zx_aud96p22.c @@ -0,0 +1,403 @@ +/* + * Copyright (C) 2017 Sanechips Technology Co., Ltd. + * Copyright 2017 Linaro Ltd. + * + * Author: Baoyou Xie <baoyou.xie@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dai.h> +#include <sound/tlv.h> + +#define AUD96P22_RESET 0x00 +#define RST_DAC_DPZ BIT(0) +#define RST_ADC_DPZ BIT(1) +#define AUD96P22_I2S1_CONFIG_0 0x03 +#define I2S1_MS_MODE BIT(3) +#define I2S1_MODE_MASK 0x7 +#define I2S1_MODE_RIGHT_J 0x0 +#define I2S1_MODE_I2S 0x1 +#define I2S1_MODE_LEFT_J 0x2 +#define AUD96P22_PD_0 0x15 +#define AUD96P22_PD_1 0x16 +#define AUD96P22_PD_3 0x18 +#define AUD96P22_PD_4 0x19 +#define AUD96P22_MUTE_0 0x1d +#define AUD96P22_MUTE_2 0x1f +#define AUD96P22_MUTE_4 0x21 +#define AUD96P22_RECVOL_0 0x24 +#define AUD96P22_RECVOL_1 0x25 +#define AUD96P22_PGA1VOL_0 0x26 +#define AUD96P22_PGA1VOL_1 0x27 +#define AUD96P22_LMVOL_0 0x34 +#define AUD96P22_LMVOL_1 0x35 +#define AUD96P22_HS1VOL_0 0x38 +#define AUD96P22_HS1VOL_1 0x39 +#define AUD96P22_PGA1SEL_0 0x47 +#define AUD96P22_PGA1SEL_1 0x48 +#define AUD96P22_LDR1SEL_0 0x59 +#define AUD96P22_LDR1SEL_1 0x60 +#define AUD96P22_LDR2SEL_0 0x5d +#define AUD96P22_REG_MAX 0xfb + +struct aud96p22_priv { + struct regmap *regmap; +}; + +static int aud96p22_adc_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + struct aud96p22_priv *priv = snd_soc_codec_get_drvdata(codec); + struct regmap *regmap = priv->regmap; + + if (event != SND_SOC_DAPM_POST_PMU) + return -EINVAL; + + /* Assert/de-assert the bit to reset ADC data path */ + regmap_update_bits(regmap, AUD96P22_RESET, RST_ADC_DPZ, 0); + regmap_update_bits(regmap, AUD96P22_RESET, RST_ADC_DPZ, RST_ADC_DPZ); + + return 0; +} + +static int aud96p22_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + struct aud96p22_priv *priv = snd_soc_codec_get_drvdata(codec); + struct regmap *regmap = priv->regmap; + + if (event != SND_SOC_DAPM_POST_PMU) + return -EINVAL; + + /* Assert/de-assert the bit to reset DAC data path */ + regmap_update_bits(regmap, AUD96P22_RESET, RST_DAC_DPZ, 0); + regmap_update_bits(regmap, AUD96P22_RESET, RST_DAC_DPZ, RST_DAC_DPZ); + + return 0; +} + +static const DECLARE_TLV_DB_SCALE(lm_tlv, -11550, 50, 0); +static const DECLARE_TLV_DB_SCALE(hs_tlv, -3900, 300, 0); +static const DECLARE_TLV_DB_SCALE(rec_tlv, -9550, 50, 0); +static const DECLARE_TLV_DB_SCALE(pga_tlv, -1800, 100, 0); + +static const struct snd_kcontrol_new aud96p22_snd_controls[] = { + /* Volume control */ + SOC_DOUBLE_R_TLV("Master Playback Volume", AUD96P22_LMVOL_0, + AUD96P22_LMVOL_1, 0, 0xff, 0, lm_tlv), + SOC_DOUBLE_R_TLV("Headphone Volume", AUD96P22_HS1VOL_0, + AUD96P22_HS1VOL_1, 0, 0xf, 0, hs_tlv), + SOC_DOUBLE_R_TLV("Master Capture Volume", AUD96P22_RECVOL_0, + AUD96P22_RECVOL_1, 0, 0xff, 0, rec_tlv), + SOC_DOUBLE_R_TLV("Analogue Capture Volume", AUD96P22_PGA1VOL_0, + AUD96P22_PGA1VOL_1, 0, 0x37, 0, pga_tlv), + + /* Mute control */ + SOC_DOUBLE("Master Playback Switch", AUD96P22_MUTE_2, 0, 1, 1, 1), + SOC_DOUBLE("Headphone Switch", AUD96P22_MUTE_2, 4, 5, 1, 1), + SOC_DOUBLE("Line Out Switch", AUD96P22_MUTE_4, 0, 1, 1, 1), + SOC_DOUBLE("Speaker Switch", AUD96P22_MUTE_4, 2, 3, 1, 1), + SOC_DOUBLE("Master Capture Switch", AUD96P22_MUTE_0, 0, 1, 1, 1), + SOC_DOUBLE("Analogue Capture Switch", AUD96P22_MUTE_0, 2, 3, 1, 1), +}; + +/* Input mux kcontrols */ +static const unsigned int ain_mux_values[] = { + 0, 1, 3, 4, 5, +}; + +static const char * const ainl_mux_texts[] = { + "AINL1 differential", + "AINL1 single-ended", + "AINL3 single-ended", + "AINL2 differential", + "AINL2 single-ended", +}; + +static const char * const ainr_mux_texts[] = { + "AINR1 differential", + "AINR1 single-ended", + "AINR3 single-ended", + "AINR2 differential", + "AINR2 single-ended", +}; + +static SOC_VALUE_ENUM_SINGLE_DECL(ainl_mux_enum, AUD96P22_PGA1SEL_0, + 0, 0x7, ainl_mux_texts, ain_mux_values); +static SOC_VALUE_ENUM_SINGLE_DECL(ainr_mux_enum, AUD96P22_PGA1SEL_1, + 0, 0x7, ainr_mux_texts, ain_mux_values); + +static const struct snd_kcontrol_new ainl_mux_kcontrol = + SOC_DAPM_ENUM("AINL Mux", ainl_mux_enum); +static const struct snd_kcontrol_new ainr_mux_kcontrol = + SOC_DAPM_ENUM("AINR Mux", ainr_mux_enum); + +/* Output mixer kcontrols */ +static const struct snd_kcontrol_new ld1_left_kcontrols[] = { + SOC_DAPM_SINGLE("DACL LD1L Switch", AUD96P22_LDR1SEL_0, 0, 1, 0), + SOC_DAPM_SINGLE("AINL LD1L Switch", AUD96P22_LDR1SEL_0, 1, 1, 0), + SOC_DAPM_SINGLE("AINR LD1L Switch", AUD96P22_LDR1SEL_0, 2, 1, 0), +}; + +static const struct snd_kcontrol_new ld1_right_kcontrols[] = { + SOC_DAPM_SINGLE("DACR LD1R Switch", AUD96P22_LDR1SEL_1, 8, 1, 0), + SOC_DAPM_SINGLE("AINR LD1R Switch", AUD96P22_LDR1SEL_1, 9, 1, 0), + SOC_DAPM_SINGLE("AINL LD1R Switch", AUD96P22_LDR1SEL_1, 10, 1, 0), +}; + +static const struct snd_kcontrol_new ld2_kcontrols[] = { + SOC_DAPM_SINGLE("DACL LD2 Switch", AUD96P22_LDR2SEL_0, 0, 1, 0), + SOC_DAPM_SINGLE("AINL LD2 Switch", AUD96P22_LDR2SEL_0, 1, 1, 0), + SOC_DAPM_SINGLE("DACR LD2 Switch", AUD96P22_LDR2SEL_0, 2, 1, 0), +}; + +static const struct snd_soc_dapm_widget aud96p22_dapm_widgets[] = { + /* Overall power bit */ + SND_SOC_DAPM_SUPPLY("POWER", AUD96P22_PD_0, 0, 0, NULL, 0), + + /* Input pins */ + SND_SOC_DAPM_INPUT("AINL1P"), + SND_SOC_DAPM_INPUT("AINL2P"), + SND_SOC_DAPM_INPUT("AINL3"), + SND_SOC_DAPM_INPUT("AINL1N"), + SND_SOC_DAPM_INPUT("AINL2N"), + SND_SOC_DAPM_INPUT("AINR2N"), + SND_SOC_DAPM_INPUT("AINR1N"), + SND_SOC_DAPM_INPUT("AINR3"), + SND_SOC_DAPM_INPUT("AINR2P"), + SND_SOC_DAPM_INPUT("AINR1P"), + + /* Input muxes */ + SND_SOC_DAPM_MUX("AINLMUX", AUD96P22_PD_1, 2, 0, &ainl_mux_kcontrol), + SND_SOC_DAPM_MUX("AINRMUX", AUD96P22_PD_1, 3, 0, &ainr_mux_kcontrol), + + /* ADCs */ + SND_SOC_DAPM_ADC_E("ADCL", "Capture Left", AUD96P22_PD_1, 0, 0, + aud96p22_adc_event, SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_ADC_E("ADCR", "Capture Right", AUD96P22_PD_1, 1, 0, + aud96p22_adc_event, SND_SOC_DAPM_POST_PMU), + + /* DACs */ + SND_SOC_DAPM_DAC_E("DACL", "Playback Left", AUD96P22_PD_3, 0, 0, + aud96p22_dac_event, SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_DAC_E("DACR", "Playback Right", AUD96P22_PD_3, 1, 0, + aud96p22_dac_event, SND_SOC_DAPM_POST_PMU), + + /* Output mixers */ + SND_SOC_DAPM_MIXER("LD1L", AUD96P22_PD_3, 6, 0, ld1_left_kcontrols, + ARRAY_SIZE(ld1_left_kcontrols)), + SND_SOC_DAPM_MIXER("LD1R", AUD96P22_PD_3, 7, 0, ld1_right_kcontrols, + ARRAY_SIZE(ld1_right_kcontrols)), + SND_SOC_DAPM_MIXER("LD2", AUD96P22_PD_4, 2, 0, ld2_kcontrols, + ARRAY_SIZE(ld2_kcontrols)), + + /* Headset power switch */ + SND_SOC_DAPM_SUPPLY("HS1L", AUD96P22_PD_3, 4, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("HS1R", AUD96P22_PD_3, 5, 0, NULL, 0), + + /* Output pins */ + SND_SOC_DAPM_OUTPUT("HSOUTL"), + SND_SOC_DAPM_OUTPUT("LINEOUTL"), + SND_SOC_DAPM_OUTPUT("LINEOUTMP"), + SND_SOC_DAPM_OUTPUT("LINEOUTMN"), + SND_SOC_DAPM_OUTPUT("LINEOUTR"), + SND_SOC_DAPM_OUTPUT("HSOUTR"), +}; + +static const struct snd_soc_dapm_route aud96p22_dapm_routes[] = { + { "AINLMUX", "AINL1 differential", "AINL1N" }, + { "AINLMUX", "AINL1 single-ended", "AINL1P" }, + { "AINLMUX", "AINL3 single-ended", "AINL3" }, + { "AINLMUX", "AINL2 differential", "AINL2N" }, + { "AINLMUX", "AINL2 single-ended", "AINL2P" }, + + { "AINRMUX", "AINR1 differential", "AINR1N" }, + { "AINRMUX", "AINR1 single-ended", "AINR1P" }, + { "AINRMUX", "AINR3 single-ended", "AINR3" }, + { "AINRMUX", "AINR2 differential", "AINR2N" }, + { "AINRMUX", "AINR2 single-ended", "AINR2P" }, + + { "ADCL", NULL, "AINLMUX" }, + { "ADCR", NULL, "AINRMUX" }, + + { "ADCL", NULL, "POWER" }, + { "ADCR", NULL, "POWER" }, + { "DACL", NULL, "POWER" }, + { "DACR", NULL, "POWER" }, + + { "LD1L", "DACL LD1L Switch", "DACL" }, + { "LD1L", "AINL LD1L Switch", "AINLMUX" }, + { "LD1L", "AINR LD1L Switch", "AINRMUX" }, + + { "LD1R", "DACR LD1R Switch", "DACR" }, + { "LD1R", "AINR LD1R Switch", "AINRMUX" }, + { "LD1R", "AINL LD1R Switch", "AINLMUX" }, + + { "LD2", "DACL LD2 Switch", "DACL" }, + { "LD2", "AINL LD2 Switch", "AINLMUX" }, + { "LD2", "DACR LD2 Switch", "DACR" }, + + { "HSOUTL", NULL, "LD1L" }, + { "HSOUTR", NULL, "LD1R" }, + { "HSOUTL", NULL, "HS1L" }, + { "HSOUTR", NULL, "HS1R" }, + + { "LINEOUTL", NULL, "LD1L" }, + { "LINEOUTR", NULL, "LD1R" }, + + { "LINEOUTMP", NULL, "LD2" }, + { "LINEOUTMN", NULL, "LD2" }, +}; + +static struct snd_soc_codec_driver aud96p22_driver = { + .component_driver = { + .controls = aud96p22_snd_controls, + .num_controls = ARRAY_SIZE(aud96p22_snd_controls), + .dapm_widgets = aud96p22_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(aud96p22_dapm_widgets), + .dapm_routes = aud96p22_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(aud96p22_dapm_routes), + }, +}; + +static int aud96p22_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct aud96p22_priv *priv = snd_soc_codec_get_drvdata(dai->codec); + struct regmap *regmap = priv->regmap; + unsigned int val; + + /* Master/slave mode */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + val = 0; + break; + case SND_SOC_DAIFMT_CBM_CFM: + val = I2S1_MS_MODE; + break; + default: + return -EINVAL; + } + + regmap_update_bits(regmap, AUD96P22_I2S1_CONFIG_0, I2S1_MS_MODE, val); + + /* Audio format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_RIGHT_J: + val = I2S1_MODE_RIGHT_J; + break; + case SND_SOC_DAIFMT_I2S: + val = I2S1_MODE_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + val = I2S1_MODE_LEFT_J; + break; + default: + return -EINVAL; + } + + regmap_update_bits(regmap, AUD96P22_I2S1_CONFIG_0, I2S1_MODE_MASK, val); + + return 0; +} + +static struct snd_soc_dai_ops aud96p22_dai_ops = { + .set_fmt = aud96p22_set_fmt, +}; + +#define AUD96P22_RATES SNDRV_PCM_RATE_8000_192000 +#define AUD96P22_FORMATS (\ + SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S18_3LE | \ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE) + +static struct snd_soc_dai_driver aud96p22_dai = { + .name = "aud96p22-dai", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = AUD96P22_RATES, + .formats = AUD96P22_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = AUD96P22_RATES, + .formats = AUD96P22_FORMATS, + }, + .ops = &aud96p22_dai_ops, +}; + +static const struct regmap_config aud96p22_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = AUD96P22_REG_MAX, + .cache_type = REGCACHE_RBTREE, +}; + +static int aud96p22_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c->dev; + struct aud96p22_priv *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (priv == NULL) + return -ENOMEM; + + priv->regmap = devm_regmap_init_i2c(i2c, &aud96p22_regmap); + if (IS_ERR(priv->regmap)) { + ret = PTR_ERR(priv->regmap); + dev_err(dev, "failed to init i2c regmap: %d\n", ret); + return ret; + } + + i2c_set_clientdata(i2c, priv); + + ret = snd_soc_register_codec(dev, &aud96p22_driver, &aud96p22_dai, 1); + if (ret) { + dev_err(dev, "failed to register codec: %d\n", ret); + return ret; + } + + return 0; +} + +static int aud96p22_i2c_remove(struct i2c_client *i2c) +{ + snd_soc_unregister_codec(&i2c->dev); + return 0; +} + +const struct of_device_id aud96p22_dt_ids[] = { + { .compatible = "zte,zx-aud96p22", }, + { } +}; +MODULE_DEVICE_TABLE(of, aud96p22_dt_ids); + +static struct i2c_driver aud96p22_i2c_driver = { + .driver = { + .name = "zx_aud96p22", + .of_match_table = aud96p22_dt_ids, + }, + .probe = aud96p22_i2c_probe, + .remove = aud96p22_i2c_remove, +}; +module_i2c_driver(aud96p22_i2c_driver); + +MODULE_DESCRIPTION("ZTE ASoC AUD96P22 CODEC driver"); +MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>"); +MODULE_LICENSE("GPL v2"); -- 2.13.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-06-23 12:04 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-06-22 6:51 [PATCH v2 0/2] Add ZTE zx-aud96p22 audio codec driver Shawn Guo 2017-06-22 6:51 ` [PATCH v2 1/2] ASoC: add bindings for ZTE zx-aud96p22 audio codec Shawn Guo 2017-06-23 12:04 ` Applied "ASoC: add bindings for ZTE zx-aud96p22 audio codec" to the asoc tree Mark Brown 2017-06-22 6:51 ` [PATCH v2 2/2] ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver Shawn Guo 2017-06-23 12:04 ` Applied "ASoC: zx_aud96p22: add ZTE ZX AUD96P22 codec driver" to the asoc tree Mark Brown
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).