From: zhi.mao@mediatek.com (Zhi Mao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/6] pwm: mediatek: add MT2712/MT7622 support
Date: Fri, 23 Jun 2017 13:08:25 +0800 [thread overview]
Message-ID: <1498194505-30930-7-git-send-email-zhi.mao@mediatek.com> (raw)
In-Reply-To: <1498194505-30930-1-git-send-email-zhi.mao@mediatek.com>
1. support multiple chip(MT2712, MT7622, MT7623)
2. add mtk_pwm_com_reg for match the registers of MT2712 pwm8
the register offset address of pwm8 for MT2712 is not fixed 0x40
and they are not the same as pwm0~6.
Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
---
drivers/pwm/pwm-mediatek.c | 55 +++++++++++++++++++++++++++++++++++---------
1 file changed, 44 insertions(+), 11 deletions(-)
diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index e5f6425..a07ae19 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
@@ -40,11 +41,19 @@ enum {
MTK_CLK_PWM3,
MTK_CLK_PWM4,
MTK_CLK_PWM5,
+ MTK_CLK_PWM6,
+ MTK_CLK_PWM7,
+ MTK_CLK_PWM8,
MTK_CLK_MAX,
};
-static const char * const mtk_pwm_clk_name[] = {
- "main", "top", "pwm1", "pwm2", "pwm3", "pwm4", "pwm5"
+static const char * const mtk_pwm_clk_name[MTK_CLK_MAX] = {
+ "main", "top", "pwm1", "pwm2", "pwm3", "pwm4",
+ "pwm5", "pwm6", "pwm7", "pwm8"
+};
+
+struct mtk_com_pwm_data {
+ unsigned int pwm_nums;
};
/**
@@ -57,6 +66,11 @@ struct mtk_pwm_chip {
struct pwm_chip chip;
void __iomem *regs;
struct clk *clks[MTK_CLK_MAX];
+ const struct mtk_com_pwm_data *data;
+};
+
+static const unsigned long mtk_pwm_com_reg[] = {
+ 0x0010, 0x0050, 0x0090, 0x00d0, 0x0110, 0x0150, 0x0190, 0x0220
};
static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip)
@@ -103,14 +117,14 @@ static void mtk_pwm_clk_disable(struct pwm_chip *chip, struct pwm_device *pwm)
static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num,
unsigned int offset)
{
- return readl(chip->regs + 0x10 + (num * 0x40) + offset);
+ return readl(chip->regs + mtk_pwm_com_reg[num] + offset);
}
static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip,
unsigned int num, unsigned int offset,
u32 value)
{
- writel(value, chip->regs + 0x10 + (num * 0x40) + offset);
+ writel(value, chip->regs + mtk_pwm_com_reg[num] + offset);
}
static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
@@ -193,23 +207,28 @@ static int mtk_pwm_probe(struct platform_device *pdev)
if (!pc)
return -ENOMEM;
+ pc->data = of_device_get_match_data(&pdev->dev);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pc->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(pc->regs))
return PTR_ERR(pc->regs);
- for (i = 0; i < MTK_CLK_MAX; i++) {
+ for (i = 0; i < pc->data->pwm_nums + 2; i++) {
pc->clks[i] = devm_clk_get(&pdev->dev, mtk_pwm_clk_name[i]);
- if (IS_ERR(pc->clks[i]))
+ if (IS_ERR(pc->clks[i])) {
+ dev_err(&pdev->dev, "[PWM] clock: %s fail: %ld\n",
+ mtk_pwm_clk_name[i], PTR_ERR(pc->clks[i]));
return PTR_ERR(pc->clks[i]);
+ }
}
- platform_set_drvdata(pdev, pc);
-
pc->chip.dev = &pdev->dev;
pc->chip.ops = &mtk_pwm_ops;
pc->chip.base = -1;
- pc->chip.npwm = 5;
+ pc->chip.npwm = pc->data->pwm_nums;
+
+ platform_set_drvdata(pdev, pc);
ret = pwmchip_add(&pc->chip);
if (ret < 0) {
@@ -227,9 +246,23 @@ static int mtk_pwm_remove(struct platform_device *pdev)
return pwmchip_remove(&pc->chip);
}
+static const struct mtk_com_pwm_data mt2712_pwm_data = {
+ .pwm_nums = 8,
+};
+
+static const struct mtk_com_pwm_data mt7622_pwm_data = {
+ .pwm_nums = 6,
+};
+
+static const struct mtk_com_pwm_data mt7623_pwm_data = {
+ .pwm_nums = 5,
+};
+
static const struct of_device_id mtk_pwm_of_match[] = {
- { .compatible = "mediatek,mt7623-pwm" },
- { }
+ {.compatible = "mediatek,mt2712-pwm", .data = &mt2712_pwm_data},
+ {.compatible = "mediatek,mt7622-pwm", .data = &mt7622_pwm_data},
+ {.compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data},
+ {},
};
MODULE_DEVICE_TABLE(of, mtk_pwm_of_match);
--
1.7.9.5
next prev parent reply other threads:[~2017-06-23 5:08 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-23 5:08 [PATCH v2 0/6] mediatek: pwm driver add MT2712/MT7622 support Zhi Mao
2017-06-23 5:08 ` [PATCH v2 1/6] pwm: kconfig: modify mediatek information Zhi Mao
2017-06-23 5:08 ` [PATCH v2 2/6] pwm: mediatek: fix pwm source clock selection Zhi Mao
2017-06-23 5:08 ` [PATCH v2 3/6] pwm: mediatek: fix clock control issue Zhi Mao
2017-06-23 5:08 ` [PATCH v2 4/6] pwm: bindings: add MT2712/MT7622 information Zhi Mao
2017-06-26 19:04 ` Rob Herring
2017-06-23 5:08 ` [PATCH v2 5/6] pwm: mediatek: add PWM_CLK_DIV_MAX Zhi Mao
2017-06-26 8:43 ` m18063
2017-06-27 2:50 ` Zhi Mao
2017-06-23 5:08 ` Zhi Mao [this message]
2017-06-23 5:48 ` [PATCH v2 0/6] mediatek: pwm driver add MT2712/MT7622 support John Crispin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1498194505-30930-7-git-send-email-zhi.mao@mediatek.com \
--to=zhi.mao@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox