From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawnguo@kernel.org (Shawn Guo) Date: Thu, 29 Jun 2017 21:26:37 +0800 Subject: [PATCH 1/2] ASoC: audio-graph-card: update bindings for amplifier support In-Reply-To: <1498742798-3128-1-git-send-email-shawnguo@kernel.org> References: <1498742798-3128-1-git-send-email-shawnguo@kernel.org> Message-ID: <1498742798-3128-2-git-send-email-shawnguo@kernel.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Shawn Guo The audio-graph-card should be able to support widgets and routing in the same way as what simple-audio-card does. The patch adds the properties into audio-graph-card bindings. Then an optional property 'pa-gpios' for controlling external amplifier, which depends on DAPM widgets and routing, is added. Signed-off-by: Shawn Guo --- Documentation/devicetree/bindings/sound/audio-graph-card.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt index bac4b1b1060f..6e6720aa33f1 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -10,6 +10,8 @@ see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt Below are same as Simple-Card. - label +- widgets +- routing - dai-format - frame-master - bitclock-master @@ -24,6 +26,9 @@ Required properties: - compatible : "audio-graph-card"; - dais : list of CPU DAI port{s} +Optional properties: +- pa-gpios: GPIO used to control external amplifier. + Example: Single DAI case sound_card { -- 1.9.1