[PATCH 0/2] ASoC: audio-graph-card: support external amplifier with DAPM widget

[PATCH 0/2] ASoC: audio-graph-card: support external amplifier with DAPM widget

[Shawn Guo]

From: Shawn Guo <shawn.guo@linaro.org>

It's basically the result of discussion around how external amplifier
controlled by GPIO should be supported by audio card, that uses generic
machine driver like audio-graph-card.

The patch series updates audio-graph-card bindings and driver to support
DAPM widget and audio routing, and then based on that, creates an output
driver widget with event to control the amplifier via GPIO.

[1] https://www.spinics.net/lists/arm-kernel/msg589717.html

Shawn Guo (2):
  ASoC: audio-graph-card: update bindings for amplifier support
  ASoC: audio-graph-card: add widgets and routing for external amplifier
    support

 .../devicetree/bindings/sound/audio-graph-card.txt |  5 +++
 sound/soc/generic/audio-graph-card.c               | 48 +++++++++++++++++++++-
 2 files changed, 52 insertions(+), 1 deletion(-)

-- 
1.9.1

[PATCH 1/2] ASoC: audio-graph-card: update bindings for amplifier support

[Shawn Guo]

From: Shawn Guo <shawn.guo@linaro.org>

The audio-graph-card should be able to support widgets and routing in
the same way as what simple-audio-card does.  The patch adds the
properties into audio-graph-card bindings.  Then an optional property
'pa-gpios' for controlling external amplifier, which depends on DAPM
widgets and routing, is added.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 Documentation/devicetree/bindings/sound/audio-graph-card.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
index bac4b1b1060f..6e6720aa33f1 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
@@ -10,6 +10,8 @@ see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
 Below are same as Simple-Card.
 
 - label
+- widgets
+- routing
 - dai-format
 - frame-master
 - bitclock-master
@@ -24,6 +26,9 @@ Required properties:
 - compatible				: "audio-graph-card";
 - dais					: list of CPU DAI port{s}
 
+Optional properties:
+- pa-gpios: GPIO used to control external amplifier.
+
 Example: Single DAI case
 
 	sound_card {
-- 
1.9.1

Applied "ASoC: audio-graph-card: update bindings for amplifier support" to the asoc tree

[Mark Brown]

The patch

   ASoC: audio-graph-card: update bindings for amplifier support

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From a0c683d734e0b3589892c17d0e1187f20d2c3a54 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@linaro.org>
Date: Thu, 29 Jun 2017 21:26:37 +0800
Subject: [PATCH] ASoC: audio-graph-card: update bindings for amplifier support

The audio-graph-card should be able to support widgets and routing in
the same way as what simple-audio-card does.  The patch adds the
properties into audio-graph-card bindings.  Then an optional property
'pa-gpios' for controlling external amplifier, which depends on DAPM
widgets and routing, is added.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 Documentation/devicetree/bindings/sound/audio-graph-card.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
index bac4b1b1060f..6e6720aa33f1 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
@@ -10,6 +10,8 @@ see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
 Below are same as Simple-Card.
 
 - label
+- widgets
+- routing
 - dai-format
 - frame-master
 - bitclock-master
@@ -24,6 +26,9 @@ Required properties:
 - compatible				: "audio-graph-card";
 - dais					: list of CPU DAI port{s}
 
+Optional properties:
+- pa-gpios: GPIO used to control external amplifier.
+
 Example: Single DAI case
 
 	sound_card {
-- 
2.13.2

[PATCH 2/2] ASoC: audio-graph-card: add widgets and routing for external amplifier support

[Shawn Guo]

From: Shawn Guo <shawn.guo@linaro.org>

It's very common that audio card has a machine level amplifier which is
controlled by GPIO.  The patch adds DAPM widgets and routing support
into audio-graph-card driver, and creates an output driver widget with
event to control the amplifier via GPIO.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 sound/soc/generic/audio-graph-card.c | 48 +++++++++++++++++++++++++++++++++++-
 1 file changed, 47 insertions(+), 1 deletion(-)

diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c
index 885b405d7844..a0bcebc77e2a 100644
--- a/sound/soc/generic/audio-graph-card.c
+++ b/sound/soc/generic/audio-graph-card.c
@@ -13,6 +13,7 @@
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -30,6 +31,34 @@ struct graph_card_data {
 		struct asoc_simple_dai codec_dai;
 	} *dai_props;
 	struct snd_soc_dai_link *dai_link;
+	struct gpio_desc *pa_gpio;
+};
+
+static int asoc_graph_card_outdrv_event(struct snd_soc_dapm_widget *w,
+					struct snd_kcontrol *kcontrol,
+					int event)
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct graph_card_data *priv = snd_soc_card_get_drvdata(dapm->card);
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		gpiod_set_value_cansleep(priv->pa_gpio, 1);
+		break;
+	case SND_SOC_DAPM_PRE_PMD:
+		gpiod_set_value_cansleep(priv->pa_gpio, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget asoc_graph_card_dapm_widgets[] = {
+	SND_SOC_DAPM_OUT_DRV_E("Amplifier", SND_SOC_NOPM,
+			       0, 0, NULL, 0, asoc_graph_card_outdrv_event,
+			       SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
 };
 
 #define graph_priv_to_card(priv) (&(priv)->snd_card)
@@ -181,8 +210,16 @@ static int asoc_graph_card_parse_of(struct graph_card_data *priv)
 	int rc, idx = 0;
 	int ret;
 
+	ret = asoc_simple_card_of_parse_widgets(card, NULL);
+	if (ret < 0)
+		return ret;
+
+	ret = asoc_simple_card_of_parse_routing(card, NULL, 1);
+	if (ret < 0)
+		return ret;
+
 	/*
-	 * we need to consider "widgets", "routing", "mclk-fs" around here
+	 * we need to consider "mclk-fs" around here
 	 * see simple-card
 	 */
 
@@ -234,6 +271,13 @@ static int asoc_graph_card_probe(struct platform_device *pdev)
 	if (!dai_props || !dai_link)
 		return -ENOMEM;
 
+	priv->pa_gpio = devm_gpiod_get_optional(dev, "pa", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->pa_gpio)) {
+		ret = PTR_ERR(priv->pa_gpio);
+		dev_err(dev, "failed to get amplifier gpio: %d\n", ret);
+		return ret;
+	}
+
 	priv->dai_props			= dai_props;
 	priv->dai_link			= dai_link;
 
@@ -243,6 +287,8 @@ static int asoc_graph_card_probe(struct platform_device *pdev)
 	card->dev	= dev;
 	card->dai_link	= dai_link;
 	card->num_links	= num;
+	card->dapm_widgets = asoc_graph_card_dapm_widgets;
+	card->num_dapm_widgets = ARRAY_SIZE(asoc_graph_card_dapm_widgets);
 
 	ret = asoc_graph_card_parse_of(priv);
 	if (ret < 0) {
-- 
1.9.1

[PATCH 2/2] ASoC: audio-graph-card: add widgets and routing for external amplifier support

[Kuninori Morimoto]

Hi Shawn

> From: Shawn Guo <shawn.guo@linaro.org>
> 
> It's very common that audio card has a machine level amplifier which is
> controlled by GPIO.  The patch adds DAPM widgets and routing support
> into audio-graph-card driver, and creates an output driver widget with
> event to control the amplifier via GPIO.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---

Thank you for your patch.
I think patch adds 3 features (= widget/routing/gpio) in 1 patch.
widget/routing features are already supported in -utils,
so, break down this patch into "widget/routing" patch, and "gpio" patch
is easy to understand, IMO.
Not a big deal though

Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Best regards
---
Kuninori Morimoto

Applied "ASoC: audio-graph-card: add widgets and routing for external amplifier support" to the asoc tree

[Mark Brown]

The patch

   ASoC: audio-graph-card: add widgets and routing for external amplifier support

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From f986907c9225cf48e9a55233b086039152bb5b99 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@linaro.org>
Date: Thu, 29 Jun 2017 21:26:38 +0800
Subject: [PATCH] ASoC: audio-graph-card: add widgets and routing for external
 amplifier support

It's very common that audio card has a machine level amplifier which is
controlled by GPIO.  The patch adds DAPM widgets and routing support
into audio-graph-card driver, and creates an output driver widget with
event to control the amplifier via GPIO.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/generic/audio-graph-card.c | 48 +++++++++++++++++++++++++++++++++++-
 1 file changed, 47 insertions(+), 1 deletion(-)

diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c
index ee752f62d89d..105ec3a6e30d 100644
--- a/sound/soc/generic/audio-graph-card.c
+++ b/sound/soc/generic/audio-graph-card.c
@@ -13,6 +13,7 @@
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -30,6 +31,34 @@ struct graph_card_data {
 		struct asoc_simple_dai codec_dai;
 	} *dai_props;
 	struct snd_soc_dai_link *dai_link;
+	struct gpio_desc *pa_gpio;
+};
+
+static int asoc_graph_card_outdrv_event(struct snd_soc_dapm_widget *w,
+					struct snd_kcontrol *kcontrol,
+					int event)
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct graph_card_data *priv = snd_soc_card_get_drvdata(dapm->card);
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		gpiod_set_value_cansleep(priv->pa_gpio, 1);
+		break;
+	case SND_SOC_DAPM_PRE_PMD:
+		gpiod_set_value_cansleep(priv->pa_gpio, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget asoc_graph_card_dapm_widgets[] = {
+	SND_SOC_DAPM_OUT_DRV_E("Amplifier", SND_SOC_NOPM,
+			       0, 0, NULL, 0, asoc_graph_card_outdrv_event,
+			       SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
 };
 
 #define graph_priv_to_card(priv) (&(priv)->snd_card)
@@ -180,8 +209,16 @@ static int asoc_graph_card_parse_of(struct graph_card_data *priv)
 	int rc, idx = 0;
 	int ret;
 
+	ret = asoc_simple_card_of_parse_widgets(card, NULL);
+	if (ret < 0)
+		return ret;
+
+	ret = asoc_simple_card_of_parse_routing(card, NULL, 1);
+	if (ret < 0)
+		return ret;
+
 	/*
-	 * we need to consider "widgets", "routing", "mclk-fs" around here
+	 * we need to consider "mclk-fs" around here
 	 * see simple-card
 	 */
 
@@ -233,6 +270,13 @@ static int asoc_graph_card_probe(struct platform_device *pdev)
 	if (!dai_props || !dai_link)
 		return -ENOMEM;
 
+	priv->pa_gpio = devm_gpiod_get_optional(dev, "pa", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->pa_gpio)) {
+		ret = PTR_ERR(priv->pa_gpio);
+		dev_err(dev, "failed to get amplifier gpio: %d\n", ret);
+		return ret;
+	}
+
 	priv->dai_props			= dai_props;
 	priv->dai_link			= dai_link;
 
@@ -242,6 +286,8 @@ static int asoc_graph_card_probe(struct platform_device *pdev)
 	card->dev	= dev;
 	card->dai_link	= dai_link;
 	card->num_links	= num;
+	card->dapm_widgets = asoc_graph_card_dapm_widgets;
+	card->num_dapm_widgets = ARRAY_SIZE(asoc_graph_card_dapm_widgets);
 
 	ret = asoc_graph_card_parse_of(priv);
 	if (ret < 0) {
-- 
2.13.2