From: festevam@gmail.com (Fabio Estevam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] ARM: dts: imx7d-sdb: Put pinctrl_spi4 in the correct location
Date: Fri, 30 Jun 2017 17:43:02 -0300 [thread overview]
Message-ID: <1498855385-9690-1-git-send-email-festevam@gmail.com> (raw)
From: Fabio Estevam <fabio.estevam@nxp.com>
pinctrl_spi4 pin group is not part of the low power iomux controller,
so move it under the normal iomuxc node.
Fixes: 184f39b57cab6 ("ARM: dts: imx7d-sdb: Add GPIO expander node")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm/boot/dts/imx7d-sdb.dts | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 54c4540..0a24d1b 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -557,6 +557,14 @@
>;
};
+ pinctrl_spi4: spi4grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
+ MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59
+ >;
+ };
+
pinctrl_tsc2046_pendown: tsc2046_pendown {
fsl,pins = <
MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59
@@ -697,13 +705,5 @@
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0
>;
-
- pinctrl_spi4: spi4grp {
- fsl,pins = <
- MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
- MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59
- MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59
- >;
- };
};
};
--
2.7.4
next reply other threads:[~2017-06-30 20:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-30 20:43 Fabio Estevam [this message]
2017-06-30 20:43 ` [PATCH 2/4] ARM: dts: imx7d-sdb: Pass phy-reset-gpios Fabio Estevam
2017-06-30 20:43 ` [PATCH 3/4] ARM: imx_v6_v7_defconfig: Enable SPI_GPIO Fabio Estevam
2017-06-30 20:43 ` [PATCH 4/4] ARM: imx_v6_v7_defconfig: Enable GPIO_74X164 Fabio Estevam
2017-07-12 8:44 ` [PATCH 1/4] ARM: dts: imx7d-sdb: Put pinctrl_spi4 in the correct location Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1498855385-9690-1-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).