From mboxrd@z Thu Jan 1 00:00:00 1970 From: hoegeun.kwon@samsung.com (Hoegeun Kwon) Date: Thu, 13 Jul 2017 11:20:40 +0900 Subject: [PATCH v4 0/3] Add support for the s6e63j0x03 panel on Rinato board References: Message-ID: <1499912443-3671-1-git-send-email-hoegeun.kwon@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Andrzej, Thank you for your review. The purpose of this patch is add support for s6e63j0x03 AMOLED panel on the rinato board(Samsung Galaxy Gear 2). Changes for V4: - Added Reviewed-by: Andrzej Hajda (2/3 patch). - Fixed the style of macro function. Changes for V3: - Applied patch 'ARM: dts: exynos: Fix the active of reset gpios from rinato dts' (v2 3/4) - Remove the unnecessary define ('MIN_BRIGHTNESS') - Removed explicit casting. - Removed violation of kernel coding style. Changes for V2: - Added the interface info in binding document. - Added Reviewed-by: Andrzej Hajda (1/3 patch). - Added Acked-by: Rob Herring (1/3 patch). - Fixed the tristate of config from video mode to command mode. - Fixed the reset gpios from active high to low from rinato dts. - Fixed a lot of things in panel driver, reflect Andrzej's review. Best regards, Hoegeun Hoegeun Kwon (3): dt-bindings: Add support for samsung s6e63j0x03 panel binding drm/panel: Add support for s6e63j0x03 panel driver ARM: dts: exynos: Remove the display-timing and delay from rinato dts .../bindings/display/panel/samsung,s6e63j0x03.txt | 24 + arch/arm/boot/dts/exynos3250-rinato.dts | 22 - drivers/gpu/drm/panel/Kconfig | 7 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 532 +++++++++++++++++++++ 5 files changed, 564 insertions(+), 22 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c -- 1.9.1