From: hoegeun.kwon@samsung.com (Hoegeun Kwon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/3] dt-bindings: Add support for samsung s6e63j0x03 panel binding
Date: Thu, 13 Jul 2017 11:20:41 +0900 [thread overview]
Message-ID: <1499912443-3671-2-git-send-email-hoegeun.kwon@samsung.com> (raw)
In-Reply-To: <1499912443-3671-1-git-send-email-hoegeun.kwon@samsung.com>
The Samsung s6e63j0x03 is a 1.63" 320x320 AMOLED panel connected using
MIPI-DSI interfaces.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../bindings/display/panel/samsung,s6e63j0x03.txt | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
new file mode 100644
index 0000000..3f1a839
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
@@ -0,0 +1,24 @@
+Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode)
+
+Required properties:
+ - compatible: "samsung,s6e63j0x03"
+ - reg: the virtual channel number of a DSI peripheral
+ - vdd3-supply: I/O voltage supply
+ - vci-supply: voltage supply for analog circuits
+ - reset-gpios: a GPIO spec for the reset pin (active low)
+ - te-gpios: a GPIO spec for the tearing effect synchronization signal
+ gpio pin (active high)
+
+Example:
+&dsi {
+ ...
+
+ panel at 0 {
+ compatible = "samsung,s6e63j0x03";
+ reg = <0>;
+ vdd3-supply = <&ldo16_reg>;
+ vci-supply = <&ldo20_reg>;
+ reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
+ te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+ };
+};
--
1.9.1
next prev parent reply other threads:[~2017-07-13 2:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20170713022056epcas5p21ece2860cb2cce0b4381cf98988496f9@epcas5p2.samsung.com>
2017-07-13 2:20 ` [PATCH v4 0/3] Add support for the s6e63j0x03 panel on Rinato board Hoegeun Kwon
2017-07-13 2:20 ` Hoegeun Kwon [this message]
2017-07-13 2:20 ` [PATCH v4 2/3] drm/panel: Add support for s6e63j0x03 panel driver Hoegeun Kwon
2017-07-13 2:20 ` [PATCH v4 3/3] ARM: dts: exynos: Remove the display-timing and delay from rinato dts Hoegeun Kwon
2017-08-29 2:52 ` Hoegeun Kwon
2017-08-29 5:58 ` Krzysztof Kozlowski
2017-09-17 7:32 ` Krzysztof Kozlowski
2017-08-01 0:26 ` [PATCH v4 0/3] Add support for the s6e63j0x03 panel on Rinato board Hoegeun Kwon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499912443-3671-2-git-send-email-hoegeun.kwon@samsung.com \
--to=hoegeun.kwon@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox