From: wxt@rock-chips.com (Caesar Wang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/5] arm64: dts: rockchip: add ARM Mali GPU node for RK3399 SoCs
Date: Mon, 17 Jul 2017 16:14:29 +0800 [thread overview]
Message-ID: <1500279271-15249-4-git-send-email-wxt@rock-chips.com> (raw)
In-Reply-To: <1500279271-15249-1-git-send-email-wxt@rock-chips.com>
Add Mali GPU device tree node for the RK3399 SoCs, with devfreq
opp table.
RK3399 and RK3399-OP1 SoCs have a different recommendation table with
gpu opp. Also, the ARM's mali driver found on
https://developer.arm.com/products/software/mali-drivers/midgard-kernel.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---
Changes in v2:
As Heiko comments on https://patchwork.kernel.org/patch/9835939/
- interrupt-name use the lower case.
- use the correct compatible "arm,mali-t860"
- remove the clock name, since the mali only have one input clock.
arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi | 33 ++++++++++++++++++++++++
arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi | 33 ++++++++++++++++++++++++
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 +++++++++
3 files changed, 78 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
index be7fe63..d8a120f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
@@ -118,6 +118,35 @@
opp-microvolt = <1250000>;
};
};
+
+ gpu_opp_table: opp-table2 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <800000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <297000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <825000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <850000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <925000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1075000>;
+ };
+ };
};
&cpu_l0 {
@@ -143,3 +172,7 @@
&cpu_b1 {
operating-points-v2 = <&cluster1_opp>;
};
+
+&gpu {
+ operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
index c83460d..81617bc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
@@ -110,6 +110,35 @@
opp-microvolt = <1200000>;
};
};
+
+ gpu_opp_table: opp-table2 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <800000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <297000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <825000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <875000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <925000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1100000>;
+ };
+ };
};
&cpu_l0 {
@@ -135,3 +164,7 @@
&cpu_b1 {
operating-points-v2 = <&cluster1_opp>;
};
+
+&gpu {
+ operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 1cbd7a2..77d67cb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1443,6 +1443,18 @@
status = "disabled";
};
+ gpu: gpu at ff9a0000 {
+ compatible = "arm,rk3399-mali", "arm,mali-t860";
+ reg = <0x0 0xff9a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "gpu", "job", "mmu";
+ clocks = <&cru ACLK_GPU>;
+ power-domains = <&power RK3399_PD_GPU>;
+ status = "disabled";
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3399-pinctrl";
rockchip,grf = <&grf>;
--
2.7.4
next prev parent reply other threads:[~2017-07-17 8:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-17 8:14 [PATCH v2 0/5] arm64: dts: rockchip: support mail and IPA thermal for rk3399 Caesar Wang
2017-07-17 8:14 ` Caesar Wang [this message]
2017-07-22 21:39 ` [PATCH v2 3/5] arm64: dts: rockchip: add ARM Mali GPU node for RK3399 SoCs Heiko Stuebner
2017-07-17 8:14 ` [PATCH v2 4/5] arm64: dts: rockchip: enable the GPU for RK3399-GRU Caesar Wang
2017-07-22 21:41 ` Heiko Stuebner
2017-07-17 8:14 ` [PATCH v2 5/5] arm64: dts: rockchip: update the thermal zones for RK3399 SoCs Caesar Wang
2017-07-22 21:48 ` Heiko Stuebner
2017-07-25 9:15 ` Caesar Wang
2017-07-19 9:06 ` [PATCH v2 0/5] arm64: dts: rockchip: support mail and IPA thermal for rk3399 Caesar Wang
2017-07-19 21:06 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500279271-15249-4-git-send-email-wxt@rock-chips.com \
--to=wxt@rock-chips.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox