From mboxrd@z Thu Jan 1 00:00:00 1970 From: philippe.cornu@st.com (Philippe CORNU) Date: Mon, 17 Jul 2017 15:19:50 +0200 Subject: [PATCH v3 0/3] Add support for the otm8009a dsi panel Message-ID: <1500297593-30633-1-git-send-email-philippe.cornu@st.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Version 3: - panel-orisetech-otm8009a.c: Remove a FIXME (Andrzej Hajda) - panel/Makefile & Kconfig: Alphabetical order (Andrzej Hajda) Version 2: - panel-orisetech-otm8009a.c: Add Manufacturer Command Set defines, add new macro for handling address shifting, improve reset sequence, use more mipi dcs helpers (Andrzej Hajda) - dt-bindings/display/panel/orisetech,otm8009a.txt: Fix reset gpio active level in the example (Andrzej Hajda), Add an "Optional Properties" section (Rob Herring). Version 1: - Initial commit The purpose of this patch is to add support for the Orise Tech otm8009a 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode). This LCD panel is used in several STM32 boards. Philippe CORNU (3): dt-bindings: Add vendor prefix for Orise Technology dt-bindings: display: panel: Add support for Orise Tech otm8009a dsi panel drm/panel: Add support for otm8009a panel driver .../bindings/display/panel/orisetech,otm8009a.txt | 21 + .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 491 +++++++++++++++++++++ 5 files changed, 523 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt create mode 100755 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c -- 1.9.1