From mboxrd@z Thu Jan 1 00:00:00 1970 From: philippe.cornu@st.com (Philippe CORNU) Date: Mon, 17 Jul 2017 15:19:52 +0200 Subject: [PATCH v3 2/3] dt-bindings: display: panel: Add support for Orise Tech otm8009a dsi panel In-Reply-To: <1500297593-30633-1-git-send-email-philippe.cornu@st.com> References: <1500297593-30633-1-git-send-email-philippe.cornu@st.com> Message-ID: <1500297593-30633-3-git-send-email-philippe.cornu@st.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using a MIPI-DSI video interface. Its backlight is managed through the DSI link. Signed-off-by: Philippe CORNU Acked-by: Rob Herring --- .../bindings/display/panel/orisetech,otm8009a.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt new file mode 100644 index 0000000..6862028 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt @@ -0,0 +1,21 @@ +Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) + +The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using +a MIPI-DSI video interface. Its backlight is managed through the DSI link. + +Required properties: + - compatible: "orisetech,otm8009a" + - reg: the virtual channel number of a DSI peripheral + +Optional properties: + - reset-gpios: a GPIO spec for the reset pin (active low). + +Example: +&dsi { + ... + panel at 0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; + }; +}; -- 1.9.1