From: jintack.lim@linaro.org (Jintack Lim)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v2 11/38] KVM: arm64: Set vcpu context depending on the guest exception level
Date: Tue, 18 Jul 2017 11:58:37 -0500 [thread overview]
Message-ID: <1500397144-16232-12-git-send-email-jintack.lim@linaro.org> (raw)
In-Reply-To: <1500397144-16232-1-git-send-email-jintack.lim@linaro.org>
If the guest exception level is EL2, then set up the shadow context of
the virtual EL2 to hardware. Otherwise, set the regular EL0/EL1 context.
Note that the shadow context content will be prepared in subsequent
patches.
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
---
arch/arm64/kvm/context.c | 74 +++++++++++++++++++++++++++++++++++++++++-------
1 file changed, 64 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/kvm/context.c b/arch/arm64/kvm/context.c
index bc43e66..2645787 100644
--- a/arch/arm64/kvm/context.c
+++ b/arch/arm64/kvm/context.c
@@ -18,11 +18,29 @@
#include <linux/kvm_host.h>
#include <asm/kvm_emulate.h>
-/**
- * kvm_arm_setup_shadow_state -- prepare shadow state based on emulated mode
- * @vcpu: The VCPU pointer
- */
-void kvm_arm_setup_shadow_state(struct kvm_vcpu *vcpu)
+static void flush_shadow_special_regs(struct kvm_vcpu *vcpu)
+{
+ struct kvm_cpu_context *ctxt = &vcpu->arch.ctxt;
+
+ ctxt->hw_pstate = *vcpu_cpsr(vcpu) & ~PSR_MODE_MASK;
+ /*
+ * We can emulate the guest's configuration of which
+ * stack pointer to use when executing in virtual EL2 by
+ * using the equivalent feature in EL1 to point to
+ * either the EL1 or EL0 stack pointer.
+ */
+ if ((*vcpu_cpsr(vcpu) & PSR_MODE_MASK) == PSR_MODE_EL2h)
+ ctxt->hw_pstate |= PSR_MODE_EL1h;
+ else
+ ctxt->hw_pstate |= PSR_MODE_EL1t;
+
+ ctxt->hw_sys_regs = ctxt->shadow_sys_regs;
+ ctxt->hw_sp_el1 = vcpu_el2_sreg(vcpu, SP_EL2);
+ ctxt->hw_elr_el1 = vcpu_el2_sreg(vcpu, ELR_EL2);
+ ctxt->hw_spsr_el1 = vcpu_el2_sreg(vcpu, SPSR_EL2);
+}
+
+static void flush_special_regs(struct kvm_vcpu *vcpu)
{
struct kvm_cpu_context *ctxt = &vcpu->arch.ctxt;
@@ -33,11 +51,18 @@ void kvm_arm_setup_shadow_state(struct kvm_vcpu *vcpu)
ctxt->hw_spsr_el1 = ctxt->gp_regs.spsr[KVM_SPSR_EL1];
}
-/**
- * kvm_arm_restore_shadow_state -- write back shadow state from guest
- * @vcpu: The VCPU pointer
- */
-void kvm_arm_restore_shadow_state(struct kvm_vcpu *vcpu)
+static void sync_shadow_special_regs(struct kvm_vcpu *vcpu)
+{
+ struct kvm_cpu_context *ctxt = &vcpu->arch.ctxt;
+
+ *vcpu_cpsr(vcpu) &= PSR_MODE_MASK;
+ *vcpu_cpsr(vcpu) |= ctxt->hw_pstate & ~PSR_MODE_MASK;
+ vcpu_el2_sreg(vcpu, SP_EL2) = ctxt->hw_sp_el1;
+ vcpu_el2_sreg(vcpu, ELR_EL2) = ctxt->hw_elr_el1;
+ vcpu_el2_sreg(vcpu, SPSR_EL2) = ctxt->hw_spsr_el1;
+}
+
+static void sync_special_regs(struct kvm_vcpu *vcpu)
{
struct kvm_cpu_context *ctxt = &vcpu->arch.ctxt;
@@ -47,6 +72,35 @@ void kvm_arm_restore_shadow_state(struct kvm_vcpu *vcpu)
ctxt->gp_regs.spsr[KVM_SPSR_EL1] = ctxt->hw_spsr_el1;
}
+/**
+ * kvm_arm_setup_shadow_state -- prepare shadow state based on emulated mode
+ * @vcpu: The VCPU pointer
+ */
+void kvm_arm_setup_shadow_state(struct kvm_vcpu *vcpu)
+{
+ struct kvm_cpu_context *ctxt = &vcpu->arch.ctxt;
+
+ if (unlikely(vcpu_mode_el2(vcpu))) {
+ flush_shadow_special_regs(vcpu);
+ ctxt->hw_sys_regs = ctxt->shadow_sys_regs;
+ } else {
+ flush_special_regs(vcpu);
+ ctxt->hw_sys_regs = ctxt->sys_regs;
+ }
+}
+
+/**
+ * kvm_arm_restore_shadow_state -- write back shadow state from guest
+ * @vcpu: The VCPU pointer
+ */
+void kvm_arm_restore_shadow_state(struct kvm_vcpu *vcpu)
+{
+ if (unlikely(vcpu_mode_el2(vcpu)))
+ sync_shadow_special_regs(vcpu);
+ else
+ sync_special_regs(vcpu);
+}
+
void kvm_arm_init_cpu_context(kvm_cpu_context_t *cpu_ctxt)
{
/* This is to set hw_sys_regs of host_cpu_context */
--
1.9.1
next prev parent reply other threads:[~2017-07-18 16:58 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-18 16:58 [RFC PATCH v2 00/38] Nested Virtualization on KVM/ARM Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 01/38] arm64: Add ARM64_HAS_NESTED_VIRT feature Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 02/38] KVM: arm/arm64: Enable nested virtualization via command-line Jintack Lim
2017-07-30 19:59 ` Christoffer Dall
2017-08-01 13:56 ` Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 03/38] KVM: arm64: Add KVM nesting feature Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 04/38] KVM: arm/arm64: Check if nested virtualization is in use Jintack Lim
2017-07-30 19:59 ` Christoffer Dall
2017-08-01 13:59 ` Jintack Lim
2017-07-30 19:59 ` Christoffer Dall
2017-08-01 14:07 ` Jintack Lim
2017-08-01 14:58 ` Christoffer Dall
2017-07-18 16:58 ` [RFC PATCH v2 05/38] KVM: arm64: Allow userspace to set PSR_MODE_EL2x Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 06/38] KVM: arm64: Add vcpu_mode_el2 primitive to support nesting Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 07/38] KVM: arm64: Add EL2 system registers to vcpu context Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 08/38] KVM: arm64: Add EL2 special " Jintack Lim
2017-07-30 19:59 ` Christoffer Dall
2017-08-01 14:08 ` Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 09/38] KVM: arm64: Add the shadow context for virtual EL2 execution Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 10/38] KVM: arm/arm64: Add a framework to prepare " Jintack Lim
2017-07-30 12:02 ` Christoffer Dall
2017-07-18 16:58 ` Jintack Lim [this message]
2017-07-18 16:58 ` [RFC PATCH v2 12/38] arm64: Add missing TCR hw defines Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 13/38] KVM: arm64: Create shadow EL1 registers Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 14/38] KVM: arm64: Synchronize EL1 system registers on virtual EL2 entry and exit Jintack Lim
2017-07-30 20:00 ` Christoffer Dall
2017-07-18 16:58 ` [RFC PATCH v2 15/38] KVM: arm64: Move exception macros and enums to a common file Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 16/38] KVM: arm64: Support to inject exceptions to the virtual EL2 Jintack Lim
2017-07-30 20:00 ` Christoffer Dall
2017-07-18 16:58 ` [RFC PATCH v2 17/38] KVM: arm64: Trap EL1 VM register accesses in " Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 18/38] KVM: arm64: Trap SPSR_EL1, ELR_EL1 and VBAR_EL1 from " Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 19/38] KVM: arm64: Trap CPACR_EL1 access in " Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 20/38] KVM: arm64: Handle eret instruction traps Jintack Lim
2017-07-30 20:00 ` Christoffer Dall
2017-08-01 14:11 ` Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 21/38] KVM: arm64: Set a handler for the system " Jintack Lim
2017-07-30 20:00 ` Christoffer Dall
2017-07-18 16:58 ` [RFC PATCH v2 22/38] KVM: arm64: Handle PSCI call via smc from the guest Jintack Lim
2017-07-30 20:00 ` Christoffer Dall
2017-07-18 16:58 ` [RFC PATCH v2 23/38] KVM: arm64: Inject HVC exceptions to the virtual EL2 Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 24/38] KVM: arm64: Respect virtual HCR_EL2.TWX setting Jintack Lim
2017-07-30 20:00 ` Christoffer Dall
2017-07-18 16:58 ` [RFC PATCH v2 25/38] KVM: arm64: Respect virtual CPTR_EL2.TFP setting Jintack Lim
2017-07-30 20:00 ` Christoffer Dall
2017-07-18 16:58 ` [RFC PATCH v2 26/38] KVM: arm64: Add macros to support the virtual EL2 with VHE Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 27/38] KVM: arm64: Add EL2 registers defined in ARMv8.1 to vcpu context Jintack Lim
2017-07-18 16:58 ` [RFC PATCH v2 28/38] KVM: arm64: Emulate EL12 register accesses from the virtual EL2 Jintack Lim
2017-07-31 8:44 ` Christoffer Dall
2017-07-18 16:58 ` [RFC PATCH v2 29/38] KVM: arm64: Support a VM with VHE considering EL0 of the VHE host Jintack Lim
2017-07-31 9:01 ` Christoffer Dall
2017-07-18 16:58 ` [RFC PATCH v2 30/38] KVM: arm64: Allow the virtual EL2 to access EL2 states without trap Jintack Lim
2017-07-31 9:37 ` Christoffer Dall
2017-07-18 16:58 ` [RFC PATCH v2 31/38] KVM: arm64: Manage the shadow states when virtual E2H bit enabled Jintack Lim
2017-07-31 9:57 ` Christoffer Dall
2017-07-18 16:58 ` [RFC PATCH v2 32/38] KVM: arm64: Trap and emulate CPTR_EL2 accesses via CPACR_EL1 from the virtual EL2 with VHE Jintack Lim
2017-07-31 12:04 ` Christoffer Dall
2017-07-18 16:58 ` [RFC PATCH v2 33/38] KVM: arm64: Emulate appropriate VM control system registers Jintack Lim
2017-07-31 12:09 ` Christoffer Dall
2017-07-18 16:59 ` [RFC PATCH v2 34/38] KVM: arm64: Respect the virtual HCR_EL2.NV bit setting Jintack Lim
2017-07-18 16:59 ` [RFC PATCH v2 35/38] KVM: arm64: Respect the virtual HCR_EL2.NV bit setting for EL12 register traps Jintack Lim
2017-07-31 12:39 ` Christoffer Dall
2017-07-18 16:59 ` [RFC PATCH v2 36/38] KVM: arm64: Respect virtual HCR_EL2.TVM and TRVM settings Jintack Lim
2017-07-31 12:42 ` Christoffer Dall
2017-07-18 16:59 ` [RFC PATCH v2 37/38] KVM: arm64: Respect the virtual HCR_EL2.NV1 bit setting Jintack Lim
2017-07-19 2:24 ` Jintack Lim
2017-07-31 12:53 ` Christoffer Dall
2017-07-18 16:59 ` [RFC PATCH v2 38/38] KVM: arm64: Respect the virtual CPTR_EL2.TCPAC setting Jintack Lim
2017-07-31 12:59 ` Christoffer Dall
2017-08-01 11:03 ` Jintack Lim
2017-08-01 11:20 ` Christoffer Dall
2017-07-19 2:23 ` [RFC PATCH v2 00/38] Nested Virtualization on KVM/ARM Jintack Lim
2017-07-19 8:49 ` Christoffer Dall
2017-07-19 14:35 ` Jintack Lim
2017-07-28 20:13 ` Bandan Das
2017-07-28 21:45 ` Jintack Lim
2017-07-31 13:00 ` Christoffer Dall
2017-08-01 10:48 ` Jintack Lim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500397144-16232-12-git-send-email-jintack.lim@linaro.org \
--to=jintack.lim@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).