From: yong.deng@magewell.com (Yong Deng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] dt-bindings: media: Add Allwinner V3s Camera Sensor Interface (CSI)
Date: Thu, 27 Jul 2017 11:51:13 +0800 [thread overview]
Message-ID: <1501127474-40895-3-git-send-email-yong.deng@magewell.com> (raw)
In-Reply-To: <1501127474-40895-1-git-send-email-yong.deng@magewell.com>
Add binding documentation for Allwinner V3s CSI.
Signed-off-by: Yong Deng <yong.deng@magewell.com>
---
.../devicetree/bindings/media/sun6i-csi.txt | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/sun6i-csi.txt
diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt
new file mode 100644
index 0000000..f8d83f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt
@@ -0,0 +1,49 @@
+Allwinner V3s Camera Sensor Interface
+------------------------------
+
+Required properties:
+ - compatible: value must be "allwinner,sun8i-v3s-csi"
+ - reg: base address and size of the memory-mapped region.
+ - interrupts: interrupt associated to this IP
+ - clocks: phandles to the clocks feeding the CSI
+ * ahb: the CSI interface clock
+ * mod: the CSI module clock
+ * ram: the CSI DRAM clock
+ - clock-names: the clock names mentioned above
+ - resets: phandles to the reset line driving the CSI
+
+- ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+ csi1: csi at 01cb4000 {
+ compatible = "allwinner,sun8i-v3s-csi";
+ reg = <0x01cb4000 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI>,
+ <&ccu CLK_CSI1_SCLK>,
+ <&ccu CLK_DRAM_CSI>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_CSI>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Parallel bus endpoint */
+ csi1_ep: endpoint {
+ remote-endpoint = <&adv7611_ep>;
+ bus-width = <16>;
+ data-shift = <0>;
+
+ /* If hsync-active/vsync-active are missing,
+ embedded BT.656 sync is used */
+ hsync-active = <0>; /* Active low */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
+
--
1.8.3.1
next prev parent reply other threads:[~2017-07-27 3:51 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-27 3:51 [PATCH v2 0/3] Initial Allwinner V3s CSI Support Yong Deng
2017-07-27 3:51 ` [PATCH v2 1/3] media: V3s: Add support for Allwinner CSI Yong Deng
2017-07-27 3:51 ` Yong Deng [this message]
2017-07-27 3:51 ` [PATCH v2 3/3] media: MAINTAINERS: add entries for Allwinner V3s CSI Yong Deng
-- strict thread matches above, loose matches on Subject: below --
2017-07-27 5:01 [PATCH v2 0/3] Initial Allwinner V3s CSI Support Yong Deng
2017-07-27 5:01 ` [PATCH v2 2/3] dt-bindings: media: Add Allwinner V3s Camera Sensor Interface (CSI) Yong Deng
2017-07-28 16:03 ` Maxime Ripard
2017-07-31 0:50 ` Yong
2017-08-03 19:14 ` Rob Herring
2017-08-07 1:00 ` Yong
2017-12-19 11:53 ` Sakari Ailus
2017-12-21 2:49 ` Yong
2017-12-27 21:47 ` Sakari Ailus
2017-12-28 1:04 ` Yong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1501127474-40895-3-git-send-email-yong.deng@magewell.com \
--to=yong.deng@magewell.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).